Sales Hotline: +44 (0)1492 541300

Military Swords

Items 1 to 10 of 11 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  • US Navy Cutlass M1860 - Gold

    Since 1860, the US Navy Cutlass M1860 Gold has been produced for the American armed forces at sea – just in time for the American Civil War! It replaces model M1841, and was inspired by the French Navy saber. The curved blade typical of sabers has a wide fuller that ends at the same place the broad back does – the spot where the false edge starts. Its blade geometry gives the US Navy Cutlass M1860 Gold a relatively light weight, but it was also made to be slightly top-heavy to give cuts more power. Held in place by a riveted pommel and the 24 K gold-plated full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. The US Navy Cutlass M1860 Gold comes with a matching leather scabbard with belt loop and a cloth bag for transport and storage.

    Total length: 81 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.9 kg
    Blade thickness (base): 4.9 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £201.04 Incl. Tax: £241.25

  • US Navy Cutlass M1860

    Starting in 1860, US Navy M1860 cutlasses were manufactured for the US Navy in Chicopee, MA. They continued to be used after the Civil War broke out. Our replica has the marks you would expect to see on an original: "USN DR 1862" and "AMESMFGCO CHICOPEE MASS" to show that the cutlass is military issue and who manufactured it. Heavily influenced by the sabre used by the French navy, our US Navy Cutlass M1860 is a replica of the model that replaced the M1841. The slightly curved blade has a wide fuller that ends in the area of the point where the broad backstops and the false edge begins. The blade geometry of the M1860 makes it extraordinarily light. Held in place by a riveted pommel and the full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. It includes a leather scabbard with a frog for holding the scabbard.

    Total length: 80 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.86 kg
    Blade thickness (base): 4.3 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Brass

    All sizes are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £111.38 Incl. Tax: £133.66

  • Confederate Sabre

    Our Confederate saber would have been primarily used by soldiers riding for famous generals like Jeb Stuart, Wade Hampton and Nathan Bedford Forrest. They taught the Yankees the meaning of fear. This Confederate saber is lightweight (approx. 1 kg) and manageable. The back is relatively broad up to the center of percussion (CoP), which makes the blade extremely stable. And the fuller, which also stops at the CoP, is responsible for the reduced weight and resulting manageability. The blade curves more acutely as it nears the point, which magnifies the saber's cutting power. An accurate reproduction of a historical weapon (s. William Albaugh, "Confederate Edged Weapons", p. 137), the hand guard, the pommel, and even the wire wrapped around the brown leather that covers the grip are made of brass.

    Total length: 100.5 cm
    Blade length: 86 cm
    Grip length: 10.5 cm
    Weight: 1.02 kg
    Blade thickness (base): 4.6 mm
    Blade thickness (CoP): 3.9 mm
    Blade width (base): 3 cm
    Blade width (base): 2.5 cm
    Point of Balance (PoB): 19 cm
    Centre of Percussion (CoP): 21 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardSteel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £101.20 Incl. Tax: £121.44

  • Nashville Plow Works Cavalry Sabre

    This fine sabre has a 1065 high carbon steel blade with full tang and is well tempered. Grip is black leather wrapped and twisted brass wire. A rare chance to own a unique piece of US wartime history. An authentic replica of the highest calibre. Prior to the Civil War Messrs. Sharp & Hamilton operated a farming implement company under the trade name of Nashville Plow Works. With the war looming, the owners converted their establishment into an armoury. The Nashville Plow Works continued operations until April 1, 1862, when the city was taken by Federal troops. This sword has a cast brass guard, with both CSA and Nashville Plow Works also cast in block letters on the underside of the guard. The pommel and back strap are of one piece and of brass. The scabbard is blackened steel with brass mounts. Made by Windlass Steelcrafts.

    Total length: 99 cm
    Blade length: 86.5 cm
    Grip length: 11.5 cm
    Weight: 860g
    Blade thickness (base): 4.4 mm
    Blade thickness (CoP): 4.2 mm
    Blade width (base): 2.9 cm
    Blade width (base): 2.4 cm
    Point of Balance (PoB): 9 cm
    Centre of Percussion (CoP): 26.5 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Steel, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £136.62 Incl. Tax: £163.94

  • American Revolutionary War Sabre

    Dated to around 1775, the prototype for this handsome sabre is pictured in "Swords & Blades of the American Revolution," a book by George C. Neumann that is very popular with collectors and sword fans. The single-edged, subtly curved blade has two fullers. A narrow, deep fuller almost runs along the entire length of the blade. The other one is shorter, shallower, and much wider. Because of them, this amazing saber weighs less than one kilogram. Nevertheless, our American Revolutionary War sabre is perfectly balanced for delivering mighty cuts: like most powerful cutting weapons, it is slightly top-heavy. The spiraling wooden grip is comfortable and easy to control, and the knuckle bow provides added hand protection.

    Total length: 100.5 cm
    Blade length: 86 cm

    Grip length: 10 cm 
    Weight: 0.95 kg 
    Blade thickness (base): 4.7 mm 
    Blade width (base): 3.3 cm 
    Point of Balance (PoB): 19 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £107.88 Incl. Tax: £129.46

  • Model 1850 Union Staff & Field Officer's Sword

    This fine reproduction saber is a faithful copy of ones used. The hand forged blade is British military spec steel that will flex over 20° and return to true. The leather handle is wire wrapped. Befitting their rank, this sword displays a high degree of ornamentation. The brass guard has hand chased foliage and "U.S." between the branches. The blade is etched with foliage, military trophies, "U.S.", "E Pluribus Unum" and "Iron Proof." During the years before the war, many Confederate officers, including General Robert E. Lee carried this sword in the Indian campaigns. The full tang is peened and visible through the solid brass pommel, scabbard is blue steel. Made by Windlass Steelcrafts.

    Overall Length: 89cm
    Blade Length: 76cm
    Thickness at Base: 0.62cm
    Width at Base: 2.6cm
    Grip Length: 9.5cm
    Weight: 978g
    Point of Balance: 14cm
    Material: 1065 High Carbon
    Edge: Blunt can be sharpened

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £126.23 Incl. Tax: £151.48

  • 1840 Non Commissioned Sword

    The 1840 non commissioned sword was carried by American soldiers for over 70 years; a period which included the Mexican War, Civil War and Spanish American War. The single edged blade has a single broad fuller running from the ricasso to near the point. The entire hilt is cast brass and the grip is ribbed. Pommel is global with a capstan. Grip is flanked by kidney-shaped hand guards. Made by Windlass Steelcrafts. The 1840 NCO sword comes with a steel scabbard. Can be sharpened for an additional fee.

    Overall Length: 96cm
    Blade: 80cm
    Thickness at Base: 0.5cm
    Width at Base: 2.2cm
    Grip Length: 9cm
    Point of Balance: 8.7cm
    Weight: 811g
    Edge: Blunt - Sharpenable
    Pommel: Peened

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £89.10 Incl. Tax: £106.92

  • Russian Shashka Cossack Sabre

    The unique Shashka (or Shashqua) cavalry sabre has its roots in the 12th century Caucasus region of Europe. Long associated with the Cossacks, the “Cavalry of the Steppes”, the sword was a standard military issue for Russian cavalry of the day. This version replicates the Model 1881 Shashka, originally produced during the reign of Tsar Nicholas II, whose cypher appears on the pommel. The sharp high-carbon blade is etched with the royal cypher, features the distinctive blade geometry of the sabre and the strong distal taper provides a balance ideal for its slashing role.  The unique hilt styling dispenses with the basket guard typical of other sabres and instead relies on a ribbed hardwood grip and a strongly hooked pommel, assisted by a strong leather lanyard, to provide handling security.

    Overal Length: 95cm
    Blade Length: 81cm
    Handle Length: 14cm
    Weight: 737g
    Point of Balance: 17cm
    Blade: 5160 High Carbon Steel
    Edge: Sharp
    Pommel: Nut
    Scabbard: Lacquered Wood, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £278.33 Incl. Tax: £334.00

  • Hungarian Sabre

    Standing in Eastern Europe, Hungary was often warring with both the west and east. Though a western type feudal state, they were also alternately allied and at war with Byzantium too. This abundance of cultural exposure was echoed in their weapons. The eastern influence shows well in this heavy sabre, capable of powerful blows from horseback or foot. The sabre has a short guard and large pommel, both of brass, and the grip is wood covered in leather. Includes scabbard.

    Overall Length: 92cm
    Blade Length: 76cm
    Blade Width: 3.8cm
    Blade Thickness: 0.5cm
    Weight: 1247g
    Material: 1065 High Carbon Steel
    Edge: Blunt, sharpenable

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £129.17 Incl. Tax: £155.00

  • Russian Kindjal

    This military issue version of the Kindjal served Russian armed forces well into the mid-20th century. This curved, double-edge blade was perfect as a close combat weapon. It originated in the Georgian Republic of Russia, but was best known as a Cossack weapon. High carbon steel blade, hardwood grip and full tang. Made by Windlass Steelcrafts®. The Kindjal comes with a scabbard. Learn More
    Excl. Tax: £47.52 Incl. Tax: £57.02

Items 1 to 10 of 11 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76