Windlass Steelcrafts

This official gladius is a detail-rich replica of the eagle sword from the movie. Of tempered carbon steel, the blade tapers from the cross guard into a kind of waistline, widening again before the point. This style of blade was named after Mainz, Germany, its place of discovery, and is the highest quality variant of the Roman gladius. The leaf-shaped Mainz blade was sturdier, heaver and better balanced than the Pompeii and Hispanicum styles. Officers in particular were equipped with this kind of gladius.

You can tell from the elaborate decoration of this gladius that this isn't a mere legionary sword. The finely crafted grip with decorative patterns ends seamlessly in the sculptural eagle head – by far the most distinctive feature on this exceptional sword. Covered with dark leather, the wooden scabbard boasts richly decorated metal plates. The relief on the chape shows a ruler surrounded by soldiers, and depicted on the throat is a legionary standing in front of a Roman temple. On the central plates there are classical Roman laurel vines completed by a laurel wreath insignia in the middle of the scabbard. A leather shoulder strap is attached with metal rings to the scabbard. All metal parts have been artificially antiqued to give the Eagle Head Gladius an especially battle-tested look.

Total length: 76.3 cm
Blade length: 50.3 cm
Grip length: 11 cm
Weight: 0.77 kg
Blade thickness (base): 1.5 mm
Blade width (base): 4.8 cm
Point of Balance (PoB): 7.7 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Intergrated
Scabbard: Wood, Leather, Brass

All dimensions are approximate and may vary from piece to piece.

A transition from the Viking sword to the classic medieval sword, our medieval sword is probably Oakeshott type X. Swords like this one were very popular for centuries.

The double-edged, hardly tapered blade has a long, relatively wide fuller which makes it balance very well. The curved, flared crossguard provides lots of protection for your hand. Thanks to its leather covering, the grip is comfortable to grasp. The wheel pommel is riveted. Our classic medieval sword comes with a scabbard.

Total length: 100 cm
Blade length: 83.5 cm
Grip length: 10 cm
Weight: 1.42 kg
Blade thickness (base): 4.1 mm
Blade thickness (CoP): 3.6 mm
Blade width (base): 5.1 cm
Blade width (CoP): 3.8 cm
Point of Balance (PoB): 15 cm
Centre of Percussion (CoP): 20 cm
Oakeshott type: X
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

On July 29, 1030, Christian King Olaf and his men faced the mighty army of their heathen opponents – which was double the size – on the battlefield at Stiklestad in Norway (90 km north of Trondheim). Olaf fell, but his army was victorious. The Christianization of Norway could begin!

The wonderful Viking sword now called Sticklestad was the type used at this famous battle. It was as effective for cuts as it was for thrusts, which means it was the perfect sword for close combat. The wide fuller on both sides makes this edged weapon lightweight. The sword handles like an extension of your arm. The wooden grip is wrapped in suede for better manageability and it comes with a handsome, matching scabbard. The copper-filled pattern on the crossguard and five-lobed pommel give the hilt of our Sticklestad Viking sword a squat, powerful look.

Total length: 94 cm
Blade length: 78.5 cm
Grip length: 10 cm
Weight: 0.9 kg
Blade thickness (base): 2.9 mm
Blade thickness (CoP): 2.7 mm
Blade width (base): 4.7 cm
Blade width (CoP): 3.5 cm
Point of Balance (PoB): 13 cm
Centre of Percussion (CoP): 21 cm
Wheeler-Oakeshott type: VI
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather, Steel

All dimensions are approximate and may vary from piece to piece. 

This sword is a prime example of a classic bastard sword. The grip wrapped with genuine leather and the bottle-stopper-shaped pommel both make it easy to wield this blackened hand-and-a-half sword with two hands. However, it is so light that it can also be used with one hand.

The double-edged blade of this blackened hand and a half sword tapers gently to the point, which is slightly rounded. The crossguard is straight until the ends, which suddenly curve. The scabbard that comes with this sword is made of genuine leather. Both the mount and chape are made of blackened steel.

Total length: 106 cm
Blade length: 85.5 cm
Grip length: 12 cm
Weight: 1.17 kg
Blade thickness (base): 4.1 mm
Blade thickness (CoP): 3.8 mm
Blade width (base): 4.3 cm
Blade width (CoP): 3.1 cm
Point of Balance (PoB): 12 cm
Centre of Percussion (CoP): 25 cm
Oakeshott type: XVIa
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece. 

The flamboyantly dressed German Landsknecht mercenary lived a harsh, brutal life and was famous for their giant, two-hand Flamberge sword. After using the Flamberge to break an enemy's row of front-line pikemen, a smaller, one-hand sword was employed for the ensuing close-quarters combat - the Katzbalger. 

Carried by all Landsknecht troops, including the pikemen and arquebusiers, this sword had an ornate "closed s" shaped guard and an extra long, fluted pommel. The Katzbalger was most assuredly respectful of its Renaissance roots.

Our replica is just as battle ready as the originals. The beautifully rendered grip would do any Landskecht proud. The fluting in the pommel extends seamlessly into the wood grip, and the guard is expertly spiral-twisted and terminates in half-spheres. The tempered, high-carbon steel blade is adorned with a trio of fullers that slightly lighten the blade.

The black leather scabbard is mildly decorated with leather bands that criss-cross and are knotted near the throat and has a unique steel tip. 

Total length: 90 cm
Blade length: 74 cm
Grip length: 9 cm
Weight: 1.2 kg
Blade width: 3.3 cm
Blade: 1075 High Carbon Steel
Edge: Sharp
Scabbard: Leather & Steel Tip

All dimensions are approximate and may vary from piece to piece.

This sword from Windlass Steelcrafts is a precise replica of the iconic sword of Henry V. Like the original, it’s a relatively short weapon, designed for fast cutting and thrusting. The blade is slightly hollow ground and the edge is sharpened at the factory. It’s beautifully balanced and feels lively in the hand. The pommel is hollow like the original and is appropriately gold plated in the recesses, and has red enamel crosses emblazoned on each side (we used enamel instead of paint for the sake of durability).

An accurate, fully functional replica of a true battle sword once used by the king of England. A design with just enough flair for a sense of elegance, but no doubt a pragmatic, effective cutting weapon. Includes top-grain leather scabbard and belt.

Overall Length: 86cm
Blade Length: 68cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Weight: 1.2kg
Material: 1065 High Carbon Steel
Edge: Blunt
Scabbard: Leather

All dimensions are approximate and may vary slightly from piece to piece.

Windlass has designed this gladius to be true to the period, but worthy of a champion (of course, a plain gladius was the sword carried by all rank-and-file legionnaires). The sharp carbon steel blade is extra-long for extra reach in the critical moments of mortal combat. Despite the extra length, this sword still feels light and extra lively in the hand. The faux bone grip contrasts handsomely with the dark-stained wooden pommel and guard.

The scabbard is crafted true to historical construction - wooden and wrapped with reddish-brown stained leather. Gold-plated hardware makes this scabbard a treat for the eyes and features relief images of a lion and gladiator. The pommel of the sword is capped with a gold-plated leaf overlay

Overall Length: 79cm
Blade Length: 61cm
Blade Width: 5cm
Blade Thickness: 8mm
Blade Material: 1075 High Carbon Steel
Edge: Sharp
Scabbard: Leather and Wood
Weight: 517g

All dimensions are approximate and may vary from piece to piece.

Our King Richard Lionheart Sword is an official replica from the movie, "Robin Hood," directed by Ridley Scott. Despite its weight of 1.6 kg, the bastard sword is superbly balanced and feels great in your hand. Parts of the grip, crossguard and pommel are covered with real gold and a total of 30 inlays of imitation ivory attest to the rank and wealth of its owner. Of solid wood, the cross-section of the grip is in the form of a hexagon. It is partially wrapped in red brown leather.

This included a sword display featuring the King of England's crest from 1194 and can be easily mounted on the wall.

Total length: 107 cm
Blade length: 84 cm
Grip length: 13.4 cm
Weight: 1.6 kg
Blade thickness (base): 0.38 cm
Blade width (base): 3.8 cm
POB: 8.8cm
Blade: High Carbon Steel
Edge: Blunt
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

In the pantheon of Norse deities, Baldur was the son of Odin and Frigg (thus a sibling to Thor and Loki) and as such, was destined to reign after Odin. Baldur is known as a figure who bestows joy to all those who share his company. Old Norse poetry relates the death of Baldur as a tragedy and a harbinger of Ragnarok.

In honor of lesser-known siblings everywhere, we've designed this classic Viking sword as a tribute to the fairest member of Asgard. The leather grip of this sword is laser engraved with the three runes that we feel most befit the Norse God. Some scholars believe the name Baldur translates to "bold" so the rune of courage has been added. In her attempt to save Baldur from harm, Frigg asked all things to swear never to harm him (except mistletoe) so the rune of protection has also been included. Finally, Baldur was also known to always be prepared for battle, so the rune of strength completes the array.

The blade is etched with runes that roughly can be translated as the spelling of "Baldur". The leather sheath (with integral belt) is covered with a layer of black suede that is adorned with top grain lace, throat, and chape. The throat and chape bear a Viking symbol for the sun, as Baldur was known as a shining light to all who knew him.

Total length: 95 cm
Blade length: 78.8 cm
Weight: 957 g
Blade width (base): 7 cm
Blade: 1065 High Carbon Steel
Edge: Unsharpened 
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.