Windlass Steelcrafts

Our Officer’s Kukri is manufactured by Windlass Steelcrafts. It is a little smaller than the standard regimental weapon, but its grip is made of natural buffalo horn. The blade of tempered carbon steel came from the same forge that has made the official edged weapons of the Indian Army for years. The officer's model has a short, narrow fuller from the grip to the curve of the blade and the typical cutouts that symbolise the god Shiva's trident. It has a full tang, which is riveted to the brass pommel end.

This Officer’s Kukri includes a wooden scabbard covered with black buffalo leather and a brass chape. At the back, there are two pockets for the smaller accompanying knives, the karda and chakmak. The holder for the belt loop is removable as required.

Total length: 35 cm
Blade length: 25 cm
Grip length: 10.5 cm
Weight: 430g
Blade thickness (base): 0.55 cm
Blade width (base): 4.0 cm
Blade width (base): 5.5 cm
Point of Balance (PoB): 4.5 cm 
Length of karda and chakmak: 9 cm
Edge: Sharp
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

If opting for our sharpening service please be aware that the two small knives will not be sharpened.

Buy the Gurkha Officer’s Kukri with confidence from the UK’s leading Gurkha Kukri retailer.

Often glorified in movies and books, the life of the cowboy involves a lot of hardship – and more than enough hard work. In addition to the already countless health hazards that presented themselves throughout the work day, 19th-century cowboys had to deal with threats from Indians and rustlers. Many carried boot knives in their tall cowboy boots both to lower their risk of injury while dealing with their horses and generally to be able to move more freely. Such knives allowed them to take care of their incidental workload.

Our Cowboy Boot Knife is a high-quality replica of the American boot knife. Its narrow shape and handy size of 25cm makes it ideal for stowing in a pair of work boots. The curved blade of carbon steel has a false edge on top that takes up about a third of the total blade length. Made of hardwood, the polished grip is riveted to the full tang and separated from the blade by a wide handguard

A sheath of leather is included upon delivery and is reinforced with metal on both sides.

Total length: 25 cm
Blade length: 13.8 cm
Grip length: 10.2 cm
Weight: 125 g
Blade thickness (base): 4 mm
Blade width (base): 2.3 cm
Edge: Sharp
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

Buy the Cowboy Boot Knife with confidence from the UK’s leading Bowie Knife retailer.

Made to current military specifications, the Gurkha Assam Rifles Kukri is hand forged from high carbon steel and comes with a regulation sheath. This kukri has a 13-1/2" long blade that is double fullered. It also features the traditional religious notch symbolic of the trident (3 pronged spear) of Shiva.

At a little over 1/4" thick, this is a very powerful chopping blade. The polished, native hardwood handle is reinforced by a brass bolster and a brass pommel with a raised lion's head decoration.

Length: 44.5cm
Blade: 31cm
Weight: 567g
Length of karda and chakmak: 10cm

All dimensions are approximate and may vary from piece to piece.

If opting for our sharpening service please be aware that the two small knives will not be sharpened.

Buy the Gurkha Assam Rifles Kukri with confidence from the UK’s leading Gurkha Kukri retailer.

Our Gurkha Regimental Kukri is manufactured by Windless Steelcrafts. It is produced to official government specifications on size, form and weight. It comes from the forge that began making weapons for the British Army in 1943. This variant has a straight, narrow fuller from the grip to the curve of the black, and a very wide, flat notch ("angkhola") behind it. The blade was forged by hand from carbon steel, and has typical cut outs that symbolize the goddess Shiva's trident. It has a full tang, which is riveted to the brass pommel end.

This Gurkha kukri includes a wooden scabbard covered with black buffalo leather and a brass chape. At the back, there are two pockets for the smaller accompanying knives, the karda and chakmak. The holder for the belt loop is removable as required.

Total length: 41.5 cm
Blade length: 30 cm
Grip length: 12.5 cm
Weight: 0.63 kg
Blade thickness (base): 0.55 cm
Blade width (base): 4.0 cm
Blade width (base): 5.5 cm
Point of Balance (PoB): 4.5 cm 
Length of karda and chakmak: 15.5 cm
Edge: Sharp
Scabbard: Wood, Leather

All dimensions are approximate and may vary from piece to piece.

If opting for our sharpening service please be aware that the two small knives will not be sharpened.

Buy the Gurkha Regimental Kukri with confidence from the UK’s leading Gurkha Kukri retailer.

Another all-purpose function knife in the Windlass Cobra line! Like the Cobra Steel Falcata (#402532), this survival knife features a hand-forged, stainless steel blade, fully tempered in state-of-the-art computer controlled ovens to a Rockwell hardness of 48º-52º so it will flex in a cut and come back for more. Features a rugged hard rubber mould-over grip that is highly detailed for a positive, shock-absorbing hold.

Based on the traditional Kindjal, one of the best overall patterns and proven over a long history of use, this is an excellent self-defence knife. Includes a riveted leather belt sheath. Comes with a factory edge.

Overall Length: 59cm
Blade Length: 42cm
Blade Material: X46Cr14 Stainless Steel
Weight: 442g
Edge: Sharp
Point of Balance: 7cm
Thickness: 4.1 mm - 3.6 mm
Width: 41.1 mm
Grip Length: 10cm
Pommel: Integrated

All dimensions are approximate and may vary from piece to piece.