Windlass Steelcrafts

The seax (also called sax, seaxe, and hadseax) was the weapon of choice of Germanic tribes between the early Middle Ages and the Viking era. There are many variations with many different blade lengths: the Merovingian Seax was used as a tool as well as a weapon.

Our lightweight broad seax has a distinctive blade form and its cutting edge is on the long side of the single-edged blade. A decorative lozenge pattern and stripes are etched into the blade on both sides. Brass studs in the wooden grip add to the decorative effect and also give you a better grip on this seax. The leather scabbard is riveted at the top and bottom and laces on one side.

Total length: 48.5 cm
Blade length: 33 cm
Grip length: 8.5 cm
Weight: 450 g
Blade thickness (base): 0.32 cm
Blade width (base): 4.1 cm
Blade: High Carbon Steel
Edge: Blunt
Scabbard: Stitched Leather

All dimensions are approximate and may vary from piece to piece.

In the ranks of the Huscarls, the bodyguard of Scandinavian nobles and kings, axes of various sizes were a very popular weapon. The Huscarls often used the Danish axe with their left hand to attack the side of the enemy not protected by a shield. Pictures of the Danish axe can be found, for example, on the Bayeux Tapestry and date to the second half of the 11th century.

Smaller beard axes such as this Danish hand axe had evolved from Francisca and served the Huscarls primarily as devastating throwing axes, but were also used in close combat. A distinctive feature is the relatively long blade cutting, which tapers sharply towards the shaft. The blade encloses the shaft made of wood and is riveted to it. The shaft is largely straight but is widened at the lower end towards the blade, which improves the handling discreetly.

Length: 53cm
Weight: 680g

All dimensions are approximate and may vary from piece to piece.

Buy the Danish Hand Axe with confidence from the UK’s leading Viking weaponry retailer.

The sgian dubh or Scottish black knife became fashionable in the mid-1700s. It is also called a Scottish sock knife because people carried them in their hose or boots. The Disarming Acts, enacted for the purpose of disarming Catholic rebels in their Scottish nests, prohibited Highlanders from owning or carrying weapons. They were forced to conceal the weapons they secretly kept.

This traditional sgian dubh features a black wooden grip with a basketweave pattern that is shaped for grasping, and comes with its own scabbard. The blade has the filework characteristic of Scottish edged weapons, and the hilt is decorated with a thistle motif.

Total length: 16.5 cm
Blade length: 8.5 cm
Grip length: 6 cm
Weight: 0.06 kg
Blade thickness (base): 4.7 mm
Blade width (base): 1.9 cm
Edge: Blunt
Scabbard: Leather, Steel 

All dimensions are approximate and may vary from piece to piece.

Buy the Sgian Dubh with confidence from the UK’s leading Scottish Dirk retailer.

Our Horse Lords helmet is based on the helmets mounted nomadic archers wore on the Eurasian steppes in ancient and medieval times - but bears a striking resemblance to those worn by the Riders or Rohan in The Lord of the Rings. The bowl of the helmet is made of coated steel and the nose guard is made of antiqued brass.

Our Horse Lords' Helmet has a protective aventail at the back, and the decorative crest is made of genuine horsehair. You can adjust the leather liner to make the helmet more comfortable to wear, and you can fasten it securely under your chin using the leather strap and buckle. Regardless of what the horse is doing, this helmet will stay on every mounted archer's head! Made from 18 gauge carbon steel.

Inner Circumference: 66cm
Weight: 1.5kg

All dimensions are approximate and may vary from piece to piece.

Buy the Horse Lords Helmet with confidence from the UK’s leading Viking Helmet retailer.

This sword ("gladius" in Latin) found in Mainz, Germany and has a leaf-shaped, double-edged blade. It was as effective for cuts as it was for thrusts, which means it was the perfect sword for close combat.

The light, faux ivory grip is characteristic of this type of gladius and the guard prevents your hand from slipping onto the blade after a strong thrust. The ample, ball-shaped pommel keeps your hand on the grip after strong cuts. A scabbard with ornamental brass applications comes with this Mainz type gladius.

Total length: 70 cm
Blade length: 50.5 cm
Grip length: 9 cm
Weight: 0.77 kg
Blade thickness (base): 4.3 mm
Blade width (base): 5.5 cm
Point of Balance (PoB): 9 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, leather, brass

All dimensions are approximate and may vary from piece to piece.

This fine sabre has a 1065 high carbon steel blade with full tang and is well tempered. Grip is black leather wrapped and twisted brass wire. A rare chance to own a unique piece of US wartime history. An authentic replica of the highest calibre. Prior to the Civil War Messrs.

Sharp & Hamilton operated a farming implement company under the trade name of Nashville Plow Works. With the war looming, the owners converted their establishment into an armoury. The Nashville Plow Works continued operations until April 1, 1862, when the city was taken by Federal troops. This sword has a cast brass guard, with both CSA and Nashville Plow Works also cast in block letters on the underside of the guard. The pommel and back strap are of one piece and of brass. The scabbard is blackened steel with brass mounts. Made by Windlass Steelcrafts.

Total length: 99 cm
Blade length: 86.5 cm
Grip length: 11.5 cm
Weight: 860g
Blade thickness (base): 4.4 mm
Blade thickness (CoP): 4.2 mm
Blade width (base): 2.9 cm
Blade width (base): 2.4 cm
Point of Balance (PoB): 9 cm
Centre of Percussion (CoP): 26.5 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Steel, Brass

All dimensions are approximate and may vary from piece to piece.

Our German war hammer does not look very dangerous at first glance, but appearances can deceive. This replica of an original in the Germanic National Museum in Nuremberg, Germany has a short, solid spike and a head shaped like a castle tower that is securely fastened to the wooden handle. Brass studs in the gripping area add control and comfort.

Length: 55cm
Head: 13cm
Weight: 910g

All dimensions are approximate and may vary from piece to piece.

Buy the German Warhammer with confidence from the UK’s leading Warhammer retailer.

In the days of the Crusades, most knights wore surcoats as protection against the sun as well as a form of identification on the battlefield.

The shining lions on this surcoat identify the man wearing it as one of Richard the Lionheart's knights, for example. Since the award-winning "Assassin's Creed" video game is set during the Third Crusade, you will often see this distinctive surcoat in the course of the game. Surcoats are typically sleeveless, and our original Assassin's Creed Lionheart surcoat is no exception. It is made of 100 percent cotton with armholes edged in wide, golden trim. Below the hips, this original Assassin's Creed surcoat is slit for more freedom of movement – on horseback and on foot.

100% Cotton

Buy the Assassin's Creed Lionheart Surcoat with confidence from the UK’s leading movie clothing retailer.

This deadly, battle-ready sword features an impressive, extravagant blade shape and also has convincing inner values. High quality carbon steel and an integrated tang give the blade its strength and add stability to the sword as a whole.

Frank Miller was consulted during the creation of this Spartan sword, so you can be assured that it is exactly like the one that plays such an important role in his comic. It comes with a matching scabbard covered in grained leather.

Total length: 76 cm
Blade length: 61 cm
Grip length: 15 cm
Weight: 1310g
Blade: High Carbon Steel
Edge: Blunt
Pommel: Integrated
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

Buy Frank Miller's 300 Spartan Sword with confidence from the UK’s leading Greek sword retailer.