Windlass Steelcrafts

This official gladius is a detail-rich replica of the eagle sword from the movie. Of tempered carbon steel, the blade tapers from the cross guard into a kind of waistline, widening again before the point. This style of blade was named after Mainz, Germany, its place of discovery, and is the highest quality variant of the Roman gladius. The leaf-shaped Mainz blade was sturdier, heaver and better balanced than the Pompeii and Hispanicum styles. Officers in particular were equipped with this kind of gladius.

You can tell from the elaborate decoration of this gladius that this isn't a mere legionary sword. The finely crafted grip with decorative patterns ends seamlessly in the sculptural eagle head – by far the most distinctive feature on this exceptional sword. Covered with dark leather, the wooden scabbard boasts richly decorated metal plates. The relief on the chape shows a ruler surrounded by soldiers, and depicted on the throat is a legionary standing in front of a Roman temple. On the central plates there are classical Roman laurel vines completed by a laurel wreath insignia in the middle of the scabbard. A leather shoulder strap is attached with metal rings to the scabbard. All metal parts have been artificially antiqued to give the Eagle Head Gladius an especially battle-tested look.

Total length: 76.3 cm
Blade length: 50.3 cm
Grip length: 11 cm
Weight: 0.77 kg
Blade thickness (base): 1.5 mm
Blade width (base): 4.8 cm
Point of Balance (PoB): 7.7 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Intergrated
Scabbard: Wood, Leather, Brass

All dimensions are approximate and may vary from piece to piece.

The musket, though the prime weapon of the French Musketeers, was a cumbersome firearm, both to load and fire. A good rapier was a necessary second weapon. Our Musketeer rapier is fashioned after those circa 1590.

The basket hilt is ambidextrous and a very effective mix of both the cup-hilt and swept-hilt styles. The grip is wood wrapped with twisted wire and the parts of the hilt are plated with gleaming nickel silver.

Total length: 117 cm
Blade length: 96 cm
Grip length: 10 cm
Weight: 1.27 kg
Blade thickness (base): 4.9 mm
Blade thickness (CoP): 3.8 mm
Blade width (base): 2.5 cm
Blade width (CoP): 1.6 cm
Point of Balance (PoB): 8 cm
Centre of Percussion (CoP): 20 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

We have "Gladiator," (the Oscar-winning, epic movie by director Ridley Scott) to thank for this exciting, original licensed helmet. In the movie, Maximus Decimus Meridius (Russell Crowe) fighting as the Spaniard wore it in the arena.

With its characteristic face guard, the warlike spikes and the threatening steel crest shaped like a shark fin, both friends and foes will show respect when they see you in this spectacular helmet. It is lined with leather and also features an adjustable liner for optimal fit and wearing comfort. With the help of leather straps and metal buckles, you can fasten our Gladiator The Spaniard helmet under your chin.

It comes with an attractive helmet stand so you can show it off at home when you're not showing it off in the arena or the amphitheatre.

Inner circumference: 66 cm

All dimensions are approximate and may vary from piece to piece,

Buy the Gladiator The Spaniard Helmet with confidence from the UK’s leading movie armour retailer.

Robert the Bruce, King of Scots, was one of the most famous warriors of his generation. He eventually, alongside William Wallace, led Scotland during the first of the Wars of Scottish Independence against England. He fought successfully during his reign to regain Scotland's place as an independent nation and is today remembered in Scotland as a national hero.

This heroic sword is as powerful as the man who would have wielded it. The master craftsmen of Windlass Steelcrafts have hand forged this blade of high carbon steel. The beautiful pommel emblazons the Cross of St. Andrew, while the hearty grip is wrapped in soft, black leather and held in place by a corded silver chain. This massive sword comes complete with a matching, thick black leather scabbard and sports a silver Lion of Scotland at its throat and a rounded silver metal shoe at its tip. A 1-1/2” wide belt, measuring 56-1/2" long, is attached.

Overall Length: 110cm
Blade Length: 91cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Weight: 1701g
Material: 1065 High Carbon Steel
Edge: Blunt, can be sharpened
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

In many fantasy novels, there has been a mystical, magical sword carried by the worthy hero. Keeping with this mighty tradition comes the Windsong Sword of Kings.

This powerful blade, made by Windlass Steelcrafts, is a high carbon steel beauty! The long blade has a wide fuller travelling almost its full length. This two-handed sword has a regal lion’s face decorating the stone-shaped guard, which has been given an antique finish along with the imposing matching pommel. The grip has been expertly wrapped with soft, blood-red leather for a good strong grip.

This stunning sword comes with a matching, blood-red leather-covered wooden scabbard with an antique steel lion head on its throat.

Overall Length: 118cm
Blade Length: 86cm
Blade Width: 5.7cm
Handle: 14cm
Weight: 1956g
Scabbard: Wood, Red Leather & Metal

All dimensions are approximate and may vary from piece to piece.

A sword befitting any who would have sought Valhalla, this hand-forged high carbon steel blade has been accentuated with a knotwork cross guard. Matching period scabbard and belt are included.

Overall Length: 94cm
Blade Length: 79cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Weight: 1162g
Material: 1065 High Carbon Steel
Blade Edge: Blunt, can be sharpened
Scabbard: Included

All dimensions are approximate and may vary from piece to piece.

This Spartan Warrior Helmet is a replica of those seen in Frank Miller's 300. It has an 18 gauge steel construction with an antique bronze finish. Soft adjustable padded cloth lining. Made by Windlass Steelcrafts.

Weight: 1928g

All dimensions are approximate and may vary from piece to piece.

The wide curved blade on this cutlass makes this the perfect chopper for a pirate raiding party. All of the steel fittings have been expertly blackened, giving this a villainous look.

The design of lavishly cut out guard allows this sword to be used right or left-handed, while the grip has been covered in ray skin for a sure hold. The high carbon steel blade is tough enough for just about any adventure. Comes with a matching leather scabbard and ships with a suede side baldric, which is fully adjustable and has the sign of the high seas octopus embroidered on the face.

Overall Length: 74cm
Blade Length: 57cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Weight: 1417g
Material: 1065 High Carbon Steel
Scabbard: Leather
Baldric: Suede

All dimensions are approximate and may vary from piece to piece.

The Vikings exploded out of the north to raid and settle most of the known world. They also warred among themselves and it was not unusual for kings to lead and engage in combat themselves. This sword and its intricate scabbard are fit for one of those brave Nordic kings. Each steel part is handmade and incredibly detailed, especially on the leather embossed scabbard, then richly plated in real silver.

The light, wide fullered Viking style blade is 1095 high carbon, well tempered steel. The scabbard is wood covered in rich harness grade leather with embossing and covered in faux reindeer fur. The beautiful metal parts are applied to the scabbard and the included baldric. Altogether making this entire piece fit for a king.

Total length: 97 cm
Blade length: 79 cm
Grip length: 15.5 cm
Weight: 1247 g
Blade thickness (base): 7 mm
Blade width (base): 9 cm
Blade: 1095 High Carbon Steel

All dimensions are approximate and may vary from piece to piece.