Windlass Steelcrafts

After hundreds of requests, Battlecry has added a classic rapier to the popular line of blackened, uniquely finished versions of history's great swords. This rapier features a very complex Spanish-style hilt and faceted pommel. The grip is hand-wound with blackened wire with woven wire rings on top and bottom.

The hand-forged, high carbon steel, fully tempered blade features a diamond cross-section to strengthen it for thrusting. Top-quality, genuine leather scabbard with deeply engraved floral pattern on the throat and tip. This type of sword was deadly effective as a dueling weapon. The 1065 high carbon steel has a darkened, battle-hardened finish, so it’s well protected from the frequent rust spots and stains that occur so often from everyday practice and exposure to the elements. The blade has an extra-wide tang and is tempering to a low 50s RC. The blade is thick for strength and peened to the pommel. This pre-sharpened blade has gone through rigorous testing.

The hands-on nature of the manufacturing by master smiths makes this line unique. Includes a certificate of authenticity signed by each smith that touched your blade through every step of the forging process.

Overall Length: 112cm
Blade Length: 90cm
Blade Material: 1065 High Carbon Steel
Blade Width: 2.6cm
Edge: Sharp
Weight: 907g

This sword is a prime example of a classic bastard sword. The grip wrapped with genuine leather and the bottle-stopper-shaped pommel both make it easy to wield this blackened hand-and-a-half sword with two hands. However, it is so light that it can also be used with one hand.

The double-edged blade of this blackened hand and a half sword tapers gently to the point, which is slightly rounded. The crossguard is straight until the ends, which suddenly curve. The scabbard that comes with this sword is made of genuine leather. Both the mount and chape are made of blackened steel.

Total length: 106 cm
Blade length: 85.5 cm
Grip length: 12 cm
Weight: 1.17 kg
Blade thickness (base): 4.1 mm
Blade thickness (CoP): 3.8 mm
Blade width (base): 4.3 cm
Blade width (CoP): 3.1 cm
Point of Balance (PoB): 12 cm
Centre of Percussion (CoP): 25 cm
Oakeshott type: XVIa
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece. 

Viking chieftains and elite warriors should have a blade for battle that matches their status. Make sure to check out the Royal Stag Seax. Made from 1075 high-carbon steel, this functional dagger features a single-edged, broke-back blade that is typical of seax blades.

An engraved design runs down the length of the blade. It takes up half of the blade. This design features an intricate Norwegian interlace knotwork pattern. Next, the dagger has a thick brass handguard. The flat circular guard features a diamond-shaped pattern. The hilt has a Sambar-antler handle. 

The dagger comes complete with a black leather scabbard, reinforced with brass trim that's adorned with filigree and has brass lashing rings.

Overall Length: 55cm
Blade Length: 35cm
Weight: 924g
Material: 1075 High Carbon Steel
Blade: Sharp
Scabbard: Leather & Brass

All dimensions are approximate and may vary from piece to piece.

This replica is very similar to the sword that appears in the "Braveheart" movie, especially because Simon Atherton, the prop master for the "Braveheart" movie, was involved in its development.

Hand forged of 1095 carbon steel, the blade of this sword is approx. 120 cm long. It has a slight taper and ends in a pear-shaped, riveted pommel. The grip is made of wood wrapped in dark brown leather that also includes the ricasso. A crossguard with a rectangular profile and a langet with a decorative pattern complete the hilt.

Total length: 154 cm
Blade length: 120 cm
Grip length: 25.5 cm
Weight: 3.03 kg
Blade thickness (base): 4.7 mm
Blade thickness (CoP): 4.4 mm
Blade width (base): 5.0 cm
Blade width (CoP): 5.0 cm
Point of Balance (PoB): 25.5 cm
Centre of Percussion (CoP): 39 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

This sword from Windlass Steelcrafts is a precise replica of the iconic sword of Henry V. Like the original, it’s a relatively short weapon, designed for fast cutting and thrusting. The blade is slightly hollow ground and the edge is sharpened at the factory. It’s beautifully balanced and feels lively in the hand. The pommel is hollow like the original and is appropriately gold plated in the recesses, and has red enamel crosses emblazoned on each side (we used enamel instead of paint for the sake of durability).

An accurate, fully functional replica of a true battle sword once used by the king of England. A design with just enough flair for a sense of elegance, but no doubt a pragmatic, effective cutting weapon. Includes top-grain leather scabbard and belt.

Overall Length: 86cm
Blade Length: 68cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Weight: 1.2kg
Material: 1065 High Carbon Steel
Edge: Blunt
Scabbard: Leather

All dimensions are approximate and may vary slightly from piece to piece.

The flamboyantly dressed German Landsknecht mercenary lived a harsh, brutal life and was famous for their giant, two-hand Flamberge sword. After using the Flamberge to break an enemy's row of front-line pikemen, a smaller, one-hand sword was employed for the ensuing close-quarters combat - the Katzbalger. 

Carried by all Landsknecht troops, including the pikemen and arquebusiers, this sword had an ornate "closed s" shaped guard and an extra long, fluted pommel. The Katzbalger was most assuredly respectful of its Renaissance roots.

Our replica is just as battle ready as the originals. The beautifully rendered grip would do any Landskecht proud. The fluting in the pommel extends seamlessly into the wood grip, and the guard is expertly spiral-twisted and terminates in half-spheres. The tempered, high-carbon steel blade is adorned with a trio of fullers that slightly lighten the blade.

The black leather scabbard is mildly decorated with leather bands that criss-cross and are knotted near the throat and has a unique steel tip. 

Total length: 90 cm
Blade length: 74 cm
Grip length: 9 cm
Weight: 1.2 kg
Blade width: 3.3 cm
Blade: 1075 High Carbon Steel
Edge: Sharp
Scabbard: Leather & Steel Tip

All dimensions are approximate and may vary from piece to piece.

In the pantheon of Norse deities, Baldur was the son of Odin and Frigg (thus a sibling to Thor and Loki) and as such, was destined to reign after Odin. Baldur is known as a figure who bestows joy to all those who share his company. Old Norse poetry relates the death of Baldur as a tragedy and a harbinger of Ragnarok.

In honor of lesser-known siblings everywhere, we've designed this classic Viking sword as a tribute to the fairest member of Asgard. The leather grip of this sword is laser engraved with the three runes that we feel most befit the Norse God. Some scholars believe the name Baldur translates to "bold" so the rune of courage has been added. In her attempt to save Baldur from harm, Frigg asked all things to swear never to harm him (except mistletoe) so the rune of protection has also been included. Finally, Baldur was also known to always be prepared for battle, so the rune of strength completes the array.

The blade is etched with runes that roughly can be translated as the spelling of "Baldur". The leather sheath (with integral belt) is covered with a layer of black suede that is adorned with top grain lace, throat, and chape. The throat and chape bear a Viking symbol for the sun, as Baldur was known as a shining light to all who knew him.

Total length: 95 cm
Blade length: 78.8 cm
Weight: 957 g
Blade width (base): 7 cm
Blade: 1065 High Carbon Steel
Edge: Unsharpened 
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

Our stunning version of the Suontaka Viking Sword features a highly detailed knotwork pommel, guard, grip band and inserts. All have been lavishly plated in rich copper.

The tough 1065 high carbon steel blade has a full tang and is fully tempered, then peened over the pommel. The sword comes complete with a rich leather scabbard and matching copper fittings and sports a baldric for wearing this powerful piece.

Overall Length: 94cm
Blade Length: 78cm
Blade Width: 4.5cm
Blade Thickness: 0.5cm
Weight: 1389g
Material: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather Scabbard with Copper Fittings & Baldric

All dimensions are approximate and may vary from piece to piece.

The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability. The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonymous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap.

The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.

Overall Length: 101.5cm
Blade Length: 82.5cm
Blade Width: 6.5cm
Blade Thickness: 4.3mm
Point of Balance (PoB): 10cm
Weight: 1.6kg
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary slightly from piece to piece.