Sales Hotline: +44 (0)1492 541300

Windlass

The Knight Shop is a distributor for Windlass Steelcrafts and the premier retailer of Windlass Swords for sale in the UK.

Windlass Swords (Windlass Steelcrafts), are based in India and are one of the oldest sword manufacturers still in production.  They were established in 1943 to supply kukris to the British Army.

Over the decades they have expanded to become one of the largest suppliers of military swords in the world. They are also well known for making high quality licensed replicas of swords, armour and historical clothing seen in Hollywood movies.

Their swords are forged from high quality, high carbon steel and tempered with the most advanced heat treating process available. They are flexible, well balanced and lightweight making them ideal for practicing historical swordplay techniques.

Windlass Swords are durable and are either of threaded or peened construction with the tang forged as part of the blade. They are blunt and have a 1mm edge although sharpening service is available on these swords. 

Items 1 to 10 of 108 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • M1 Bayonet

    M1 Garand rifle was first issued with M1905 16″ bayonet. In 1942, the US Military determined that a shorter bayonet was more useful. Existing stocks of M1905 bayonets were cut down to 10″. In addition, new manufacture 10″ bayonets were also produced. Cut-off-bayonets have fuller that extends to the point and new manufacture has fullers that stop about 3″ from the point. This reproduction bayonet is made to original specifications from high carbon blued steel with hard plastic grips. Made by Windlass Steelcrafts. Scabbard not included.

    Length: 37cm
    Blade: 25cm
    Weight: 397g

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £53.33 Incl. Tax: £64.00

  • Spanish Buckler

    This hand-forged steel buckler shield has a soft-raised boss in the centre for deflecting any blade. The face has been given a decorative acid bath and the sturdy steel handle has been covered in wood, which gives you a secure grip in just about any type of encounter.

    Diameter: 38cm
    Handle Length: 10cm
    Material: 18 Gauge Mild Steel
    Weight: 1701g

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £46.67 Incl. Tax: £56.00

  • Overlord Long Leather Belt

    This truly magnificent belt is perfect for a wide range of periods from Viking through the high Middle Ages. Made of high-grade black leather, this belt has been decorated with a variety of rich adornments. From the elaborate silver buckle and tongue to the twelve Celtic knotwork crosses, this belt will make just about any outfit fit for a king.

    Length: 169cm
    Width: 3.5cm

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £46.67 Incl. Tax: £56.00

  • Templar Tunic

    At the council of Troyes in 1128, the Templar Order was confirmed by Pope Honorius II. The Knights received the white vestment as a symbol of purity of their life, to which Pope Eugenius added the red cross in 1146. King Baldwin II, the King of Jerusalem, installed the Order in a part of the Palace of Jerusalem believed to be Solomon’s Temple, from which they took the name of Knights of the Temple or Templars.
    The order’s battle honours in the defence of the Holy Land are now legendary, while the accounts of their missing accumulated wealth are still a mystery.

    This Templar Tunic is made from a medium weight white cotton and has a large red velvet Templar cross stitched to the chest, with faux leather trims on the collar and shoulders.

    Learn More
    Excl. Tax: £59.58 Incl. Tax: £71.50

  • Noble's Black Belt

    One of the main accessories of knights and nobles was the belt. This rich addition to your ensemble is made of tough, high-grade black leather. This belt has been appointed with twelve stunning silver finish Celtic knotwork Conchos, a matching silver tongue and an elaborately pierced buckle. Fits actual waist sizes 36” (91cm) to 45" (114cm) but naturally additional holes can be punched for smaller or larger sizes!

    Measures a full 67"(170cm) in length and has silver Celtic knotwork Conchos.

    Learn More
    Excl. Tax: £46.67 Incl. Tax: £56.00

  • Assassin's Creed Lionheart Surcoat

    In the days of the Crusades, most knights wore surcoats as protection against the sun as well as a form of identification on the battlefield.

    The shining lions on this surcoat identify the man wearing it as one of Richard the Lionheart's knights, for example. Since the award-winning "Assassin's Creed" video game is set during the Third Crusade, you will often see this distinctive surcoat in the course of the game. Surcoats are typically sleeveless, and our original Assassin's Creed Lionheart surcoat is no exception. It is made of 100 percent cotton with armholes edged in wide, golden trim. Below the hips, this original Assassin's Creed surcoat is slit for more freedom of movement – on horseback and on foot.

    100% Cotton

    Buy the Assassin's Creed Lionheart Surcoat with confidence from the UK’s leading movie clothing retailer.

    Learn More
    Excl. Tax: £59.88 Incl. Tax: £71.86

  • German Warhammer

    Our German war hammer does not look very dangerous at first glance, but appearances can deceive. This replica of an original in the Germanic National Museum in Nuremberg, Germany has a short, solid spike and a head shaped like a castle tower that is securely fastened to the wooden handle. Brass studs in the gripping area add control and comfort.

    Length: 55cm
    Head: 13cm
    Weight: 910g

    All dimensions are approximate and may vary from piece to piece. 

    Buy the German Warhammer with confidence from the UK’s leading Warhammer retailer. Learn More

    Excl. Tax: £47.50 Incl. Tax: £57.00

  • Jambiya Curved Dagger

    A jambiya is the traditional curved dagger that you find wherever the Arabic culture flourishes. It represents a status symbol for the man wearing it, and is most often worn on a belt. Status aside, thanks to its elegantly curved, double-edged blade a jambiya is a very efficient weapon. The center rib that runs from the crossguard to the point on both sides is designed to give this dagger an extraordinarily high degree of stability. The beautiful hardwood grip is waisted and decorated on both sides with sun-shaped metal plates to underscore the distinctive look of this curved dagger. It comes with a leather-covered wooden scabbard.

    Total length: 36 cm
    Blade length: 22 cm
    Grip length: 14 cm
    Weight: 0.32 kg
    Blade thickness (base): 5.5 mm
    Blade width (base): 5.2 cm
    Edge: Blunt
    Scabbard: Leather, Wood, Steel 

    All dimensions are approximate and may vary from piece to piece.

    Buy the Jambiya Arabic Dagger with confidence from the UK’s leading Historical Dagger retailer.

    Learn More
    Excl. Tax: £50.00 Incl. Tax: £60.00

  • Danish Hand Axe

    In the ranks of the Huscarls, the bodyguard of Scandinavian nobles and kings, axes of various sizes were a very popular weapon. The Huscarls often used the Danish axe with their left hand to attack the side of the enemy not protected by a shield. Pictures of the Danish axe can be found, for example, on the Bayeux Tapestry and date to the second half of the 11th century.

    Smaller beard axes such as this Danish hand axe had evolved from Francisca and served the Huscarls primarily as devastating throwing axes, but were also used in close combat. A distinctive feature is the relatively long blade cutting, which tapers sharply towards the shaft. The blade encloses the shaft made of wood and is riveted to it. The shaft is largely straight but is widened at the lower end towards the blade, which improves the handling discreetly.

    Length: 53cm
    Weight: 680g

    All dimensions are approximate and may vary from piece to piece. 

    Buy the Danish Hand Axe with confidence from the UK’s leading Viking weaponry retailer.

    Learn More
    Excl. Tax: £56.67 Incl. Tax: £68.00

  • Cobra Steel Kindjal

    Another all-purpose function knife in the Windlass Cobra line! Like the Cobra Steel Falcata (#402532), this survival knife features a hand-forged, stainless steel blade, fully tempered in state-of-the-art computer controlled ovens. to a Rockwell hardness of 48º-52º so it will flex in a cut and come back for more. Features a rugged hard rubber mould-over grip that is highly detailed for a positive, shock-absorbing hold. Based on the traditional Kindjal, one of the best overall patterns and proven over a long history of use, this is an excellent self-defence knife. Includes a riveted leather belt sheath. Comes with a factory edge.

    Overall Length: 59cm
    Blade Length: 42cm
    Blade Material: X46Cr14 Stainless Steel
    Weight: 442g
    Edge: Sharp
    Point of Balance: 7cm
    Thickness: 4.1 mm - 3.6 mm
    Width: 41.1 mm
    Grip Length: 10cm
    Pommel: Integrated

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £45.83 Incl. Tax: £55.00

    Out of stock

Items 1 to 10 of 108 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76