Sales Hotline: +44 (0)1492 541300

Universal Swords

Items 1 to 10 of 38 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • British 1856 Royal Navy Midshipman's Dirk

    This fantastic replica features ornate brass fittings and a forged and tempered steel blade housed in a premium grade leather scabbard. It is a faithful replica of an original dirk issued to Midshipmen in the Royal Navy during the age of sail. Its size makes it a great gift for naval enthusiast who hasn’t quite got the room for a full length cutlass! 

    Total length: 61 cm
    Blade length: 47 cm
    Grip length: 8.5 cm
    Weight: 0.578 kg
    Blade thickness (base): 6.4 mm
    Blade width (base): 2.4 cm
    Point of Balance (PoB): 8 cm
    Edge: Blunt
    Scabbard:
    Leather, Wood, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £113.33 Incl. Tax: £136.00

  • British Infantry Officer's Sword - 1796 Pattern

    When the British Army standardized the swords to be carried by infantry officers in 1796 this is the sword they settled on; a spadroon-like cut-and-thrust sword with simple, but elegant Georgian styling that hearkened back to the Smallswords carried by gentlemen in earlier times. In just four years following, the blade was at the hip of practically all British Line Infantry Officers. Regardless of the standardization of form, the blades varied in their width and in their engraved decoration. Though widespread, it was not regarded as a good combat blade despite being used through the entirety of Britain’s contests with France in the Napoleonic Era. It would not be officially replaced until 1822 by the more elaborate ‘’Gothic-Hilted’’ sword and before then many officers had opted to acquire the 1803 Pattern sabre instead.

    Total length: 100cm
    Blade length: 85cm
    Grip length: 6cm
    Guard width: 9.5cm
    Weight: 946g
    Blade thickness (base): 0.6cm
    Blade width (base): 2.5cm
    Point of Balance (PoB): 33cm
    Blade: AISI 1065 High Carbon Steel
    Edge: Blunt
    Pommel: Nut
    Scabbard: Leather, Wood, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £208.33 Incl. Tax: £250.00

  • French Imperial Marine Sabre

    Total length: 85cm
    Blade length: 72cm
    Grip length: 8cm
    Guard width: 8cm
    Weight: 1048g
    Blade thickness (base): 0.7cm 
    Blade width (base): 4cm
    Point of Balance (PoB): 27cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £154.17 Incl. Tax: £185.00

  • Replacement Scabbard for British 1796 Pattern Light Cavalry Sabre

    This replica scabbard is crafted from steel and fits our British Light Cavalry Sabre - 1796 Pattern US-S-133. 

    Please note: These replacement scabbards are designed to fit our replica swords. Antique swords come in a variety of shapes and sizes and there is no guarantee that our replica scabbards will fit them.

    Learn More
    Excl. Tax: £50.00 Incl. Tax: £60.00

  • Replacement Scabbard for British 1796 Pattern Heavy Cavalry Sword

    This replica scabbard is crafted from steel and fits our British Heavy Cavalry Sword - 1796 Pattern US-S-134.

    Please note: These replacement scabbards are designed to fit our replica swords. Antique swords come in a variety of shapes and sizes and there is no guarantee that our replica scabbards will fit them.

    Learn More
    Excl. Tax: £50.00 Incl. Tax: £60.00

  • Replacement Scabbard for British ER/GR 1897 Pattern Infantry Officer's Sword - Steel

    This replica scabbard is crafted from steel and fits our British Infantry Officer's Sword - ER 1897 Pattern US-S-158 and British Infantry Officer's Sword - GR 1897 Pattern US-S-137.

    Please note: These replacement scabbards are designed to fit our replica swords. Antique swords come in a variety of shapes and sizes and there is no guarantee that our replica scabbards will fit them.

    Learn More
    Excl. Tax: £50.00 Incl. Tax: £60.00

  • Replacement Scabbard for British ER/GR 1897 Pattern Infantry Officer's Sword - Leather

    This replica scabbard is crafted from leather and fits our British Infantry Officer's Sword - ER 1897 Pattern US-S-158 and British Infantry Officer's Sword - GR 1897 Pattern US-S-137.

    Please note: These replacement scabbards are designed to fit our replica swords. Antique swords come in a variety of shapes and sizes and there is no guarantee that our replica scabbards will fit them.

    Learn More
    Excl. Tax: £50.00 Incl. Tax: £60.00

  • British Infantry Officer's Sword - GR 1897 Pattern (Steel Scabbard)

    This sword is considered by some to be the best fighting sword ever issued to a British Officer. As such it has never been replaced and is the current issue sword within the British Army. The only difference between this sword and its Victorian predecessor is the cypher of the reigning monarch at the time of issue. The polished blade has been forged from AISI 1065 High Carbon Steel and has been well tempered.

    Replacement steel scabbard and leather scabbard available separately.

    Total length: 98 cm
    Blade length: 82.5 cm
    Grip length:  10.5 cm
    Weight: 0.902 kg
    Blade thickness (base): 5.6 mm
    Blade thickness (CoP): 4.7  mm
    Blade width (base):  2.3 cm
    Blade width (CoP): 2 cm 
    Point of Balance (PoB): 14 cm
    Centre of Percussion (CoP):  26 cm
    Blade: AISI 1065 High Carbon Steel
    Edge: Blunt
    Pommel: Nut
    ScabbardSteel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £187.50 Incl. Tax: £225.00

  • British Infantry Officer's Sword - GR 1897 Pattern (Leather Scabbard)

    This sword is considered by some to be the best fighting sword ever issued to a British Officer. As such it has never been replaced and is the current issue sword within the British Army. The only difference between this sword and its Victorian predecessor is the cypher of the reigning monarch at the time of issue. The polished blade has been forged from AISI 1065 High Carbon Steel and has been well tempered. Includes regulation pattern leather scabbard. 

    Replacement steel scabbard and leather scabbard available separately.

    Total length: 98 cm
    Blade length: 82.5 cm
    Grip length:  10.5 cm
    Weight: 0.902 kg
    Blade thickness (base): 5.6 mm
    Blade thickness (CoP): 4.7  mm
    Blade width (base):  2.3 cm
    Blade width (CoP): 2 cm 
    Point of Balance (PoB): 14 cm
    Centre of Percussion (CoP):  26 cm
    Blade: AISI 1065 High Carbon Steel
    Edge: Blunt
    Pommel: Nut
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £187.50 Incl. Tax: £225.00

  • Prince of Wales’s 30th Light Dragoons Officer's Sabre

    Our British Light Dragoons Sabre is a replica of the swords carried by the Prince of Wales’s 30th Light Dragoon Regiments from 1794-1796. A similar sword was carried by the Princes of Wales’s 10th Light Dragoon Regiments (still in existence as the 10th Royal Hussars). The 30th Light Dragoons Regiment only existed for a couple of years, making this sword both rare and collectable. The National Army Museum in London has one of the few surviving originals in its collection.

    Total length: 100cm
    Blade length: 86cm
    Handle length: 10cm
    Blade thickness: 7mm - 3.7mm
    Point of Balance (POB): 15cm
    Weight: 1kg
    Blade: AISI 1065 High Carbon Steel
    Edge: Blunt
    Pommel: Integrated
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £208.33 Incl. Tax: £250.00

Items 1 to 10 of 38 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76