Collections

This sword ("gladius" in Latin) found in Mainz, Germany and has a leaf-shaped, double-edged blade. It was as effective for cuts as it was for thrusts, which means it was the perfect sword for close combat. The light, faux ivory grip is characteristic of this type of gladius and the guard prevents your hand from slipping onto the blade after a strong thrust. The ample, ball-shaped pommel keeps your hand on the grip after strong cuts. A scabbard with ornamental brass applications comes with this Mainz type gladius.

Total length: 70 cm
Blade length: 50.5 cm
Grip length: 9 cm
Weight: 0.77 kg
Blade thickness (base): 4.3 mm
Blade width (base): 5.5 cm
Point of Balance (PoB): 9 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, leather, brass

All dimensions are approximate and may vary from piece to piece.

This sword has been named after the famous battlefield where Prince Hal (later Henry V of England) defeated Percy Hotspur in 1403 and is noted by the pierced crosses in the steel guard. This long slender blade is double-edged and finely tapered. Possessing enough breadth to cut, the Shrewsbury is equally strong to thrust. Made by the master craftsmen at Windlass Steelcrafts.

Overall: 107cm
Blade Length: 85cm
Blade Width: 4.5cm
Blade Thickness: 0.5cm
Weight: 1247g

All dimensions are approximate and may vary from piece to piece.

This unique cutlass was truly meant for a pirate captain. The tough blade is made of 1065 high-carbon steel, while the entire sword has been given an antiqued finish by the master craftsmen of Windlass Steelcrafts. The guard has a pierced, seashell inspired design, which adds both beauty and protection. The handle is wood, wrapped with soft black leather and finished with a matching chain. Comes complete with a black leather scabbard with belt stop and matching antique gold fittings.

Overall length: 87cm
Blade length: 70cm
Grip length: 11.5cm
Weight: 1020g
Blade thickness (base): 4.7mm
Blade width (base): 2.7cm
Point of Balance (PoB): 11.5cm
Blade:1065 High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

The runic alphabet is etched across its blade. The Vikings believed runes possessed magical power and often inscribed them onto weapons to increase power. Copied from a Norse seax on display at the British Museum, this historical replica was crafted from high-quality materials with exceptional attention to detail and craftsmanship. The etching runs along the spine of the high carbon steel blade. The leather-wrapped handle gives you a firm grip on this surprisingly light and quick weapon. The Runic Long Seax comes with a brown leather scabbard and two back-belt hanging straps.

Total length: 74 cm
Blade length: 58 cm
Weight: 434 g 
Blade width (base): 3.5 cm
Blade: High Carbon Steel
Edge: Blunt
Scabbard: Stitched Leather

All dimensions are approximate and may vary from piece to piece.

This fine sabre has a 1065 high carbon steel blade with full tang and is well tempered. Grip is black leather wrapped and twisted brass wire. A rare chance to own a unique piece of US wartime history. An authentic replica of the highest calibre. Prior to the Civil War Messrs. Sharp & Hamilton operated a farming implement company under the trade name of Nashville Plow Works. With the war looming, the owners converted their establishment into an armoury. The Nashville Plow Works continued operations until April 1, 1862, when the city was taken by Federal troops. This sword has a cast brass guard, with both CSA and Nashville Plow Works also cast in block letters on the underside of the guard. The pommel and back strap are of one piece and of brass. The scabbard is blackened steel with brass mounts. Made by Windlass Steelcrafts.

Total length: 99 cm
Blade length: 86.5 cm
Grip length: 11.5 cm
Weight: 860g
Blade thickness (base): 4.4 mm
Blade thickness (CoP): 4.2 mm
Blade width (base): 2.9 cm
Blade width (base): 2.4 cm
Point of Balance (PoB): 9 cm
Centre of Percussion (CoP): 26.5 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Steel, Brass

All dimensions are approximate and may vary from piece to piece.

Standing in Eastern Europe, Hungary was often warring with both the west and east. Though a western type feudal state, they were also alternately allied and at war with Byzantium too. This abundance of cultural exposure was echoed in their weapons. The eastern influence shows well in this heavy sabre, capable of powerful blows from horseback or foot. The sabre has a short guard and large pommel, both of brass, and the grip is wood covered in leather. Includes scabbard.

Overall Length: 92cm
Blade Length: 76cm
Blade Width: 3.8cm
Blade Thickness: 0.5cm
Weight: 1247g
Material: 1065 High Carbon Steel
Edge: Blunt, sharpenable

All dimensions are approximate and may vary from piece to piece.

This is an exact replica of the sword used by the Templar Rene from the movie Soldier of God. The Oakeshott Type XVa sword marks the transition between the one-handed swords of the High Middle Ages and the hand and a half swords. Our Crusader sword is an excellent example of this type. It is similar to a normal type XV, but its tapering blade has a diamond-shaped cross-section and is somewhat longer and slimmer. The hardwood grip wrapped with black leather is a little longer than a typical one-handed sword, so it can also be used comfortably with two hands. The pommel and the crossguard with flattened sides are decorated with crosses on both sides – the ones on the crossguard are painted red. This hand forged Crusader sword with crosses is made of carbon steel and includes a black leather scabbard with a mount and chape.

Total length: 104 cm
Blade length: 86 cm
Grip length: 12 cm
Weight: 1.22 kg
Blade thickness (base): 3.8 mm
Blade thickness (CoP): 4.2 mm
Blade width (base): 4.7 cm
Blade width (CoP): 2.8 cm
Point of Balance (PoB): 13.5 cm
Centre of Percussion (CoP): 30 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

This battle-ready, one-handed sword has a tapered, high carbon steel blade. Small wheel pommel and a curved, stout crossguard. Wood grip is cord and leather-wrapped. Includes leather scabbard.

Length: 101cm
Blade Length: 86cm
Weight: 1247g

All dimensions are approximate and may vary from piece to piece.

This fine reproduction saber is a faithful copy of ones used. The hand forged blade is British military spec steel that will flex over 20° and return to true. The leather handle is wire wrapped. Befitting their rank, this sword displays a high degree of ornamentation. The brass guard has hand chased foliage and "U.S." between the branches. The blade is etched with foliage, military trophies, "U.S.", "E Pluribus Unum" and "Iron Proof." During the years before the war, many Confederate officers, including General Robert E. Lee carried this sword in the Indian campaigns. The full tang is peened and visible through the solid brass pommel, scabbard is blue steel. Made by Windlass Steelcrafts.

Overall Length: 89cm
Blade Length: 76cm
Thickness at Base: 0.62cm
Width at Base: 2.6cm
Grip Length: 9.5cm
Weight: 978g
Point of Balance: 14cm
Material: 1065 High Carbon
Edge: Blunt can be sharpened

All dimensions are approximate and may vary from piece to piece.