Sales Hotline: +44 (0)1492 541300

Collections

Items 1 to 10 of 155 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Blackened Raven Claw Knife

    This fantasy knife has a blackened blade, cast metal hilt and, metal and leather scabbard.

    This fantasy fighting knife has a blackened blade, cast metal hilt and, metal and leather scabbard.

    This wicked Raven Claw Knife's hilt is cast metal and the blade is blackened to a deep black lustre and nicely balanced.

    Includes metal and leather scabbard.

    Length: 24cm

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £57.92 Incl. Tax: £69.50

  • Sword Hilted Dagger

    Large daggers were carried by knights and men-at-arms. While they were used for camp chores, they were mainly used on the battlefield where they were often the last line of defence. This classic form has a steel wheel pommel and down curving guard. The grip is wood covered in leather and the wide, strongly pointed blade is from tempered high carbon steel. Includes matching scabbard.

    Overall Length: 45cm
    Blade Length: 30.5cm
    Blade Width: 4.5cm
    Blade Thickness: 0.5cm
    Weight: 567g
    Material: 1055 High Carbon Steel
    Edge: Blunt can be sharpened

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £57.92 Incl. Tax: £69.50

  • Roman Pompeii Gladius - Decorated

    The Roman Gladius was the primary weapon of the Roman Legionary and was used in conjunction with the 'Scutum' (shield) and 'Pilum' (spear). Its design was strongly influenced by the swords used by the Iberian (Spanish) Celts. It was predominantly designed as a thrusting weapon and was in use in one form or another from the 4th Century BC to the 3rd Century AD. The Pompeii Gladius takes its name from the archaeological site in Italy where, during excavations, 4 such swords were found. The swords are dated to before 79AD - the year that Pompeii was buried in volcanic ash. The Pompeii Gladius, along with the earlier Mainz Pattern Gladius, would have been issued to the garrison at Hadrian’s Wall. Examples can be seen in H. Russell Robinson’s book "What The Soldiers Wore On Hadrians Wall'".

    Our Pompeii Gladius features a turned wood pommel and bone grip. The straight blade is hand forged from steel and in housed in a wooden scabbard with red leather covering and decorated brass fittings. This sword is not designed or recommended for contact reenactment (fighting) but is favoured by living history enthusiasts.

    Overall Length: 70cm
    Blade Length: 48cm
    Width: 4.9cm
    Grip Length: 10.8cm
    Weight: 1135g
    Thickness: 5mm
    P.O.B.: 11cm
    Edge: Blunt
    Pommel: Threaded
    Scabbard: Wood, Leather, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £74.17 Incl. Tax: £89.00

  • Knight's Templar Sword

    7 Review(s)

    The Knights Templar Sword is the most popular sword in our collection. If you do not have the space for a full-size sword why not consider purchasing the matching Knights Templar Dagger instead. The sword features a forged steel blade with solid brass pommel and guard - both adorned with the Templar Cross in red enamel. Comes complete with leather scabbard with and baldric shoulder belt. This item has a blunt blade and is manufactured for display only.

    Total length: 92.5 cm
    Blade length: 74.5 cm
    Grip length: 12.5 cm
    Blade thickness (base): 0.49 cm
    Blade width (base): 4.5 cm
    Weight: 1046g
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £54.17 Incl. Tax: £65.00

  • Three Lobe Viking Sword

    Our 3 Lobe Viking Sword is based on a late Viking design from around the 11th century and is contemporary with the Battle of Stamford Bridge in 1066. A similar sword was found on Canwick Common in Norfolk and is now held in the British Museum collection. It features a forged and fullered steel blade designed for hacking and slashing and is hilted with a short guard and 3 lobed pommel. The wooden scabbard is wrapped with brown leather to match that of the leather wrapped sword grip. Although this sword has a forged blade it is not tempered and is not suitable for combat. 

    Total length:
    95 cm
    Blade length: 79 cm
    Grip length: 10.5 cm
    Weight: 1352g
    Blade thickness (base): 0.6 cm
    Blade width (base):  4.4 cm
    Point of Balance (PoB): 17cm
    Blade: EN45 High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Wood, Leather

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £79.17 Incl. Tax: £95.00

  • Red Dragon Combat - Bastard Sword

    1 Review(s)

    2019 will herald the launch of the Red Dragon Combat range of useable swords. These swords feature high carbon EN42J Spring Steel blades that have been forged and tempered to perform like their historical counterparts. They have a core hardness of 45HRC approx. with an edge hardness of 50HRC approx. The hilts feature authentically styled forged guards and pommels constructed from steel, and wooden grips that are masterfully wrapped in leather cord for an aesthetic yet comfortable finish. They come complete with leather wrapped wooden scabbards and authentically styled integrated leather belts.

    Overall Length: 114cm
    Blade Length: 91cm
    Blade Width: 5cm
    Blade Thickness: 0.5cm
    Guard Width: 19.5cm
    Point of Balance: 18cm
    Weight: 1224g
    Material: High Carbon Steel Blade, Leather Grip
    Edge: Blunt/Sharp
    Pommel: Peened
    Scabbard: Wood, leather, steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £125.00 Incl. Tax: £150.00

  • Red Dragon Combat - Hand and a Half Sword

    2 Review(s)

    2019 will herald the launch of the Red Dragon Combat range of useable swords. These swords feature high carbon EN42J Spring Steel blades that have been forged and tempered to perform like their historical counterparts. They have a core hardness of 45HRC approx. with an edge hardness of 50HRC approx. The hilts feature authentically styled forged guards and pommels constructed from steel, and wooden grips that are masterfully wrapped in leather cord for an aesthetic yet comfortable finish. They come complete with leather wrapped wooden scabbards and authentically styled integrated leather belts.

    Overall Length: 113cm
    Blade Length: 89.5cm
    Blade Width: 5cm
    Blade Thickness: 0.5cm
    Guard Width: 21.3cm
    Point of Balance: 18cm
    Weight: 1364g
    Material: High Carbon Steel Blade, Leather Grip
    Edge: Blunt
    Pommel: Peened
    Scabbard: Wood, leather, steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £125.00 Incl. Tax: £150.00

  • Knight's Templar Arming Sword

    Our Knights Templar Arming Sword features an unsharpened carbon steel blade with central fuller. The grip is wood wrapped in brown leather and flanked with a steel guard and pommel. The pommel is emblazoned with an enamelled Templar red cross. Comes complete with wooded scabbard wrapped in brown leather with polished steel fittings. This sword has a blunt blade and is manufactured for display only.

    Total length: 94.5 cm
    Blade length: 77.5 cm
    Grip length: 11 cm
    Weight: 1046 g
    Blade thickness (base): 0.44 cm
    Blade width (base):  4.6 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £79.17 Incl. Tax: £95.00

  • The Accolade Sword of the Knights Templar

    1 Review(s)

    The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability. The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonymous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap. The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.

    Overall Length: 101.5cm
    Blade Length: 82.5cm
    Blade Width: 6.5cm
    Blade Thickness: 4.3mm
    Point of Balance (PoB): 10cm
    Weight: 1.6kg
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £228.33 Incl. Tax: £274.00

  • Crusader Knight’s Sword

    Our Crusader Knight’s Sword is perfect for knights from any of the Crusader Orders. This 14th century arming sword has a light and well balanced and perfect for use with a shield.  It features a hand forged blade, steel fittings and a leather-wrapped grip. The well-made leather scabbard is decorated with an embossed shield featuring a crusader cross (which can be painted to reflect a particular crusading order).  The Crusader Knight’s Sword has a blunt blade and is designed for display only. It is not suitable for contact re-enactment. 

    Overall Length: 94cm
    Blade Length: 77cm
    Blade Width: 5cm
    Blade Thickness: 0.7cm
    Guard Width: 19.5cm
    Guard Depth: 2cm
    Grip: 10cm
    Weight: 1150g
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    ScabbardLeather, Wood

    All dimensions are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £112.50 Incl. Tax: £135.00

Items 1 to 10 of 155 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76