Popular Gift Ideas

Fully enclosed suits of armour (or harnesses as they were known) were a development of the 15th century and afforded paramount protection for the wearer. The joints were articulated to allow for a combination of maximum protection whilst still allowing the wearer freedom to move and fight. The polished surfaces gave rise to the term "Alwyte Armour" and made it hard for blades and arrowheads to gain purchase.

Our Miniature Suit of Armour is a 1/3 scale replica and is fully articulated like the original. It comes complete with stand and sword and will add a sense of grandeur to wherever it is placed. Some (simple) assembly is required.

Polished steel finish.

Height: 70cm
Width: 29cm
Depth: 17cm
Weight: 5276g

All dimensions are approximate and may vary from piece to piece.

Buy the Miniature Suit of Armour with confidence from the UK’s leading suit of armour retailer.

Our Great Helm is hand crafted from polished steel and features and adjustable leather "spider" liner and large brass decorative cross. It is constructed from 18 gauge steel and not recommended for re-enactment.

Height: 35cm
Length: 28cm
Width: 21cm
Weight: 3136g
Top internal width: 18cm
Top internal front to back: 23cm
Middle internal width: 19.5cm
Middle front to back: 26.5cm
Bottom internal width: 21.5cm
Bottom internal front to back: 28.5cm

All dimensions are approximate and may vary from piece to piece.

Buy the Early Great Helm with confidence from the UK’s leading Medieval Helmet retailer.

Excalibur (meaning to 'cut steel') was the great sword of King Arthur which 'gave light like 30 torches'. In the Arthurian stories, the name is given to two different swords - the one that the young king pulled from the anvil set in the stone before the church, and so proved his right to the kingship; and the other which the king took from the arm that rose above the surface of the lake, 'clothed in white samite, mystic, wonderful' and which eventually received back the sword when Arthur was dying.

Our Excalibur sword is a product of the world famous Art Gladius factory in the historic sword manufacturing city of Toledo, Spain. The ornate hilt features heraldic dragons on both the pommel and guard and tops a broad, etched stainless steel blade.  

Total length: 112.5 cm
Blade length: 88 cm
Grip length: 15.5 cm
Weight: 1630 g
Blade thickness (base): 0.5 cm
Blade width (base): 5.3 cm
Point of Balance (PoB): 13.5 cm
Blade: Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary slightly from piece to piece.

The Black Prince Sword is a magnificent piece and produced by the world famous Art Gladius workshop in Toledo, Spain. The black and gold hilt is heavily adorned with decoration and features the Royal Arms of England at the centre of the guard. One side of the pommel is decorated with coats of arms associated with the Black prince whilst the other side bears the words "HONNI SOIT QUI MAL Y PENSE" being Old French for "Evil be to him who evil thinks". This is also the motto of the Knights of the Garter.

The polished stainless steel blade is masterfully etched with medieval symbols and features a fuller to decrease the weight without sacrificing strength. This item has a blunt blade and is manufactured for display only. Matching Black Prince Dagger also available. 

Total length: 112.5 cm
Blade length: 88 cm
Grip length: 15 cm
Weight: 1800 g
Blade thickness (base): 0.4 cm
Blade width (base): 5.5 cm
Point of Balance (PoB): 12.5 cm
Blade: Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary slightly from piece to piece.

Our Practical broadswords are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies.

The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds.

Total length: 92.7 cm
Blade length: 76.2 cm
Grip length: 16.5 cm
Weight: 1.105 kg
Point of Balance (PoB): 10cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Plastic, Steel

All dimensions are approximate and may vary from piece to piece.

Our Odin Viking Sword is based on an excavated find from Dyback in Sweden and now on display in the Historiska Museum, Stockholm. It is one of the finest Viking era swords ever found in Scandinavia. It was probably made in England and if not, it was certainly influenced by English styles. It is an exceptional example of the Winchester style of metalwork from the 8th-11th century.

This stunning replica features a wire bound hilt (the original sword had silver wire) and a decorated stainless steel blade. This fantastic replica is produced in the world famous Art Gladius factory in Toledo, Spain. This item has a blunt blade and is manufactured for display only.

Total length: 106 cm
Blade length: 83 cm
Grip length:  11 cm
Weight: 1576 g
Blade thickness (base):  0.3 cm
Blade width (base): 3.8 cm
Point of Balance (PoB):  5 cm
Blade: Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece. 

The Roman Gladius was the primary weapon of the Roman Legionary and was used in conjunction with the 'Scutum' (shield) and 'Pilum' (spear). Its design was strongly influenced by the swords used by the Iberian (Spanish) Celts. It was predominantly designed as a thrusting weapon and was in use in one form or another from the 4th Century BC to the 3rd Century AD. The Pompeii Gladius takes its name from the archaeological site in Italy where, during excavations, 4 such swords were found. The swords are dated to before 79AD - the year that Pompeii was buried in volcanic ash. The Pompeii Gladius, along with the earlier Mainz Pattern Gladius, would have been issued to the garrison at Hadrian’s Wall. Examples can be seen in H. Russell Robinson’s book "What The Soldiers Wore On Hadrians Wall'".

Our Pompeii Gladius features a turned wood pommel and bone grip. The straight blade is hand forged from steel and in housed in a wooden scabbard with red leather covering and decorated brass fittings. This sword is not designed or recommended for contact reenactment (fighting) but is favoured by living history enthusiasts.

Overall Length: 70cm
Blade Length: 48cm
Width: 4.9cm
Grip Length: 10.8cm
Weight: 1135g
Thickness: 5mm
P.O.B: 11cm
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, Leather, Brass

All dimensions are approximate and may vary from piece to piece.

The Knights Templar Sword is the most popular sword in our collection. If you do not have the space for a full-size sword why not consider purchasing the matching Knights Templar Dagger instead.

The sword features a forged steel blade with solid brass pommel and guard - both adorned with the Templar Cross in red enamel. Comes complete with leather scabbard with and baldric shoulder belt. This item has a blunt blade and is manufactured for display only.

Total length: 92.5 cm
Blade length: 74.5 cm
Grip length: 12.5 cm
Blade thickness (base): 0.49 cm
Blade width (base): 4.5 cm
Weight: 1046g
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.