Pirate Swords

The musket, though the prime weapon of the French Musketeers, was a cumbersome firearm, both to load and fire. A good rapier was a necessary second weapon. Our Musketeer rapier is fashioned after those circa 1590. The basket hilt is ambidextrous and a very effective mix of both the cup-hilt and swept-hilt styles. The grip is wood wrapped with twisted wire and the parts of the hilt are plated with gleaming nickel silver.

Total length: 117 cm
Blade length: 96 cm
Grip length: 10 cm
Weight: 1.27 kg
Blade thickness (base): 4.9 mm
Blade thickness (CoP): 3.8 mm
Blade width (base): 2.5 cm
Blade width (CoP): 1.6 cm
Point of Balance (PoB): 8 cm
Centre of Percussion (CoP): 20 cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

This sword was first introduced to the Royal Navy in 1827 and has been standard issue throughout a multitude of conflicts since. It is still the regulation pattern sword to this day. This version features a pipe-backed blade that went out of regulation in 1846. Its design was adopted and is carried today by countries within the Commonwealth such as the Canadian and Royal Australian Navy. The polished blade has been forged from AISI 1065 High Carbon Steel and has been well tempered.

Total length: 93.5 cm
Blade length: 80 cm
Grip length:  9.5 cm
Weight: 0.814 kg
Blade thickness (base): 5.1 mm 
Blade width (base):  2.9 cm
Point of Balance (PoB): 16  cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

Up until 1805 the Royal Navy did not have a regulation pattern sword. The sword that was introduced was modelled on the 1803 pattern infantry sabre that was previously carried by Navy and Marine officers. The 1805 pattern sword was used by Lord Horatio Nelson and he was no doubt armed with it at his most famous battle, The Battle of Trafalgar. After he was killed at the battle his sword was returned to England and is now on display in the Nelson Museum, Great Yarmouth, England. This sword was in constant use until it was replaced in 1827 by a newer model. The polished blade has been forged from AISI 1065 High Carbon Steel and has been well tempered.

Total length: 95 cm
Blade length: 83 cm
Grip length: 10 cm
Weight: 0.905 kg
Blade thickness (base): 7.8 mm
Blade thickness (CoP): 5.3 mm
Blade width (base): 2.6 cm
Blade width (CoP): 2.2 cm
Point of Balance (PoB): 18 cm
Centre of Percussion (CoP): 25 cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

This iconic sword was first introduced to Royal Navy in 1827 and has been in service throughout a whole host of conflicts right up until today. It was adopted by all of the Commonwealth Navies in the British Empire and is still carried today as a dress sword.

The brass hilt features a lion-head pommel, adopted from the earlier 1805 pattern swords of Nelson’s navy, an imitation ray-skin grip wrapped with brass wire and a crown and fouled anchor motif on the guard. It features a hinged latch to allow it to be attached to the scabbard, a requisite for a naval officer’s side arm, especially when on-board during a gale! The AISI 1065 high carbon steel blade is tempered and decorated with etchings. One side features the Crown and Fouled Anchor of the Royal Navy, the other side featuring the Royal Coat of Arms. The wooden scabbard is covered with black leather and features decorated brass fittings and 2 suspension rings.

Total length: 94 cm
Blade length: 80 cm
Grip length:  10 cm
Weight: 907g
Blade thickness (base): 0.76cm
Blade width (base):  2.7 cm
Point of Balance (PoB): 18 cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: Brass, Leather

All dimensions are approximate and may vary from piece to piece.