Sales Hotline: +44 (0)1492 541300

Pirate Swords

Pirate Swords

Items 1 to 10 of 24 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  • British Royal Navy Boarding Cutlass - 1804 Pattern

    2 Review(s)

    This pattern of sword was introduced during the Napoleonic Wars and saw service at the famous Battle of Trafalgar. Previous cutlasses shared a similar figure 8 hilt design but featured horn or leather grips that deteriorated quickly when exposed to seawater and changes in temperature. The introduction of an iron grip greatly extended the serviceable life of this sword. The hilts were traditionally painted or japanned to stop them from rusting. The blade has been forged from AISI 1065 High Carbon Steel and has been well-tempered. It is housed in a black hardened buff leather scabbard.

    Total length: 89 cm
    Blade length: 74.5 cm
    Grip length:  12 cm
    Weight: 1.458 kg
    Blade thickness (base):  6.3 mm
    Blade width (base):  3.6 cm
    Point of Balance (PoB):  15 cm
    Blade: AISI 1065 High Carbon Steel
    Edge: Blunt
    Pommel: Threaded
    Scabbard: Leather, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £120.00 Incl. Tax: £144.00

  • US Navy Cutlass M1860

    Starting in 1860, US Navy M1860 cutlasses were manufactured for the US Navy in Chicopee, MA. They continued to be used after the Civil War broke out. Our replica has the marks you would expect to see on an original: "USN DR 1862" and "AMESMFGCO CHICOPEE MASS" to show that the cutlass is military issue and who manufactured it. Heavily influenced by the sabre used by the French navy, our US Navy Cutlass M1860 is a replica of the model that replaced the M1841. The slightly curved blade has a wide fuller that ends in the area of the point where the broad backstops and the false edge begins. The blade geometry of the M1860 makes it extraordinarily light. Held in place by a riveted pommel and the full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. It includes a leather scabbard with a frog for holding the scabbard.

    Total length: 80 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.86 kg
    Blade thickness (base): 4.3 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Brass

    All sizes are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £111.38 Incl. Tax: £133.66

  • US Navy Cutlass M1860 - Gold

    Since 1860, the US Navy Cutlass M1860 Gold has been produced for the American armed forces at sea – just in time for the American Civil War! It replaces model M1841, and was inspired by the French Navy saber. The curved blade typical of sabers has a wide fuller that ends at the same place the broad back does – the spot where the false edge starts. Its blade geometry gives the US Navy Cutlass M1860 Gold a relatively light weight, but it was also made to be slightly top-heavy to give cuts more power. Held in place by a riveted pommel and the 24 K gold-plated full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. The US Navy Cutlass M1860 Gold comes with a matching leather scabbard with belt loop and a cloth bag for transport and storage.

    Total length: 81 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.9 kg
    Blade thickness (base): 4.9 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £201.04 Incl. Tax: £241.25

  • Pirate Captain's Hanger

    On board ship, weapons were usually kept under lock and key. Mutinying crew members could have turned angry words into bloody deeds too easily if they were carrying weapons.But the captain had a special role and was of course allowed to have his saber or hanger at his side at all times. Our officer hanger has a modestly curved blade with a narrow fuller that extends over three-quarters of the length of the blade. This saber has a one handed grip wrapped in leather. The hand guard includes a crossguard that extends toward the pommel. The ball-shaped pommel is decorative, but it also contributes to the balance of our officer hanger, which comes with a scabbard.

    Total length: 83 cm
    Blade length: 66 cm
    Grip length: 10.5 cm
    Weight: 0.98 kg
    Blade thickness (base): 4.4 mm
    Blade thickness (CoP): 4.2 mm
    Blade width (base): 2.8 cm
    Blade width (CoP): 2.4 cm
    Point of Balance (PoB): 6 cm
    Centre of Percussion (CoP): 23 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £118.80 Incl. Tax: £142.56

  • Dutch East India Cutlass

    The Dutch East India Company was not only the first multinational corporation, it was also the world's largest trading company in the 17th and 18th centuries. In its heyday, it owned around 4,700 ships with a crew totaling almost one billion men. They had to defend their ships as well as their offices in Indonesia and Jakarta, and a cutlass was the best weapon for the job. For man-to-man battles, its length is perfect for the tight space of a ship. And the single-edged blade with two fullers is extraordinarily strong so it can cut ropes as well as hack through underbrush on land. The slightly curved, elegant wooden grip combines with an gracefully sweeping knuckle bow and shell-shaped basket to create a beautiful hilt worthy of the mighty VOC. Our Dutch East India Co. cutlass comes with a leather scabbard.

    Total length: 85 cm
    Blade length: 71 cm
    Grip length: 11 cm
    Weight: 1.17 kg
    Blade thickness (base): 4.3 mm
    Blade width (base): 3.8 cm
    Point of Balance (PoB): 14.5 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Nut
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £154.17 Incl. Tax: £185.00

  • English Privateer Cutlass

    This replica has a hand forged, high carbon steel blade and a solid brass guard. Leather scabbard with brass throat and tip.

    Total length: 77.5 cm
    Blade length: 64 cm
    Grip length: 8.5 cm
    Weight: 860g
    Blade thickness (base): 4.7 mm
    Blade width (base): 3.5 cm
    Point of Balance (PoB): 11 cm

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £118.80 Incl. Tax: £142.56

  • Corsair Cutlass Barbary Pirate Sword

    The wide curved blade on this cutlass makes this the perfect chopper for a pirate raiding party. All of the steel fittings have been expertly blackened, giving this a villainous look. The design of lavishly cut out guard allows this sword to be used right or left-handed, while the grip has been covered in ray skin for a sure hold. The high carbon steel blade is tough enough for just about any adventure. Comes with a matching leather scabbard and ships with a suede side baldric, which is fully adjustable and has the sign of the high seas octopus embroidered on the face.

    Overall Length: 74cm
    Blade Length: 57cm
    Blade Width: 5cm
    Blade Thickness: 0.5cm
    Weight: 1417g
    Material: 1065 High Carbon Steel
    Scabbard: Leather
    Baldric: Suede

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £230.42 Incl. Tax: £276.50

  • Pirate Cutlass

    The Cutlass, also known as a ‘hanger’, ‘cuttoe’ or ‘short saber’, was the weapon of choice for a 16th and 17th Century pirate. The word Cutlass comes from the French word “couelace” or the Italian for “coltellaccio”, both meaning ‘large knife’. The weapon was designed as a single-edged blade with a steel basket for protection and ease in combat within the proximity of a pirate ship's close quarters. The sweeping, open design of this cutlass is both threatening and practical, with the basket being used to punch their enemies with an iron fist.Our cutlass consists of a steel riveted pommel and black, leather-covered wooden handle and includes a leather scabbard to protect the blade in transit. 

    Total length: 72.5 cm
    Blade length: 57cm
    Grip length: 10.5 cm
    Weight: 1.23 kg
    Blade thickness (base): 4.4 mm
    Blade thickness (CoP): 4.4 mm
    Blade width (base): 4.4 cm
    Blade width (CoP): 4.7 cm
    Point of Balance (PoB): 8.5 cm
    Centre of Percussion (CoP): 18 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £151.20 Incl. Tax: £181.44

  • Scottish Pirate Cutlass

    Pirates greatly appreciated the cutlass for its effectiveness in close combat. Because of its relatively compact dimensions, a cutlass could do quite a bit of damage in the close quarters of a ship's hold, while a strong cut with its broad blade could even sever the mighty ropes of a ship. Sometimes the classic cutlass was made with an openwork hilt for ventilation plus hand protection, but the single-edged, wide, curved blade with a distinctive yelman is characteristic of all cutlasses. The grip is wrapped with leather and the rounded pommel is riveted. The accompanying scabbard has a mount and chape made of steel. Circa 1690.

    Total length: 79 cm
    Blade length: 63 cm
    Grip length: 9 cm
    Weight: 1.43 kg
    Blade thickness (base): 4.3 mm
    Blade thickness (CoP): 4.3 mm
    Blade width (base): 5.1 cm
    Blade width (CoP): 4.7 cm
    Point of Balance (PoB): 9 cm
    Centre of Percussion (CoP): 26 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Nut
    ScabbardLeather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £154.17 Incl. Tax: £185.00

  • Sinclair Sabre - Scottish Cutlass

    The Sinclair Sabre is a type of cutlass also known as a Dusägge (or Dusack). It was named after George Sinclair, a mercenary captain from Scotland whose men frequently carried these swords. In 1612 he was transported by the pirate captain Robert Stewart to fight the Danes but ambushed and killed when leading his men against Norwegian militia. 

    Total length: 80 cm
    Blade length: 64 cm
    Grip length: 10 cm
    Weight: 1594g
    Blade thickness (base): 10 mm
    Blade width (base): 4.5 cm
    Point of Balance (PoB): 7 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Nut
    Scabbard: Leather, Wood, Steel

    All sizes are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £79.17 Incl. Tax: £95.00

Items 1 to 10 of 24 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76