Sales Hotline: +44 (0)1492 541300

Pirate Swords

Pirate Swords

6 Item(s)

Set Descending Direction
per page

Grid  List 

  • US Navy Cutlass M1860

    Starting in 1860, US Navy M1860 cutlasses were manufactured for the US Navy in Chicopee, MA. They continued to be used after the Civil War broke out. Our replica has the marks you would expect to see on an original: "USN DR 1862" and "AMESMFGCO CHICOPEE MASS" to show that the cutlass is military issue and who manufactured it. Heavily influenced by the sabre used by the French navy, our US Navy Cutlass M1860 is a replica of the model that replaced the M1841. The slightly curved blade has a wide fuller that ends in the area of the point where the broad backstops and the false edge begins. The blade geometry of the M1860 makes it extraordinarily light. Held in place by a riveted pommel and the full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. It includes a leather scabbard with a frog for holding the scabbard.

    Total length: 80 cm
    Blade length: 65.5 cm
    Grip length: 11 cm
    Weight: 0.86 kg
    Blade thickness (base): 4.3 mm
    Blade width (base): 3.1 cm
    Point of Balance (PoB): 11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Brass

    All sizes are approximate and may vary slightly from piece to piece.

    Learn More
    Excl. Tax: £111.38 Incl. Tax: £133.66

  • Pirate Captain's Hanger

    On board ship, weapons were usually kept under lock and key. Mutinying crew members could have turned angry words into bloody deeds too easily if they were carrying weapons.But the captain had a special role and was of course allowed to have his saber or hanger at his side at all times. Our officer hanger has a modestly curved blade with a narrow fuller that extends over three-quarters of the length of the blade. This saber has a one handed grip wrapped in leather. The hand guard includes a crossguard that extends toward the pommel. The ball-shaped pommel is decorative, but it also contributes to the balance of our officer hanger, which comes with a scabbard.

    Total length: 83 cm
    Blade length: 66 cm
    Grip length: 10.5 cm
    Weight: 0.98 kg
    Blade thickness (base): 4.4 mm
    Blade thickness (CoP): 4.2 mm
    Blade width (base): 2.8 cm
    Blade width (CoP): 2.4 cm
    Point of Balance (PoB): 6 cm
    Centre of Percussion (CoP): 23 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Steel

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £118.80 Incl. Tax: £142.56

  • English Privateer Cutlass

    This replica has a hand forged, high carbon steel blade and a solid brass guard. Leather scabbard with brass throat and tip.

    Total length: 77.5 cm
    Blade length: 64 cm
    Grip length: 8.5 cm
    Weight: 860g
    Blade thickness (base): 4.7 mm
    Blade width (base): 3.5 cm
    Point of Balance (PoB): 11 cm

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £118.80 Incl. Tax: £142.56

  • French Briquet Cutlass

    This sword is very popular with people studying cutlass drills and was carried by most of the French Infantry throughout the Napoleonic Wars. It is also very popular for opening champagne bottles! The polished blade has been forged from EN9 steel and has been well tempered.

    Total length: 74 cm
    Blade length: 60 cm
    Grip length:  10 cm
    Weight: 1.012 kg
    Blade thickness (base): 7.2 mm 
    Blade width (base):  3.4 cm
    Point of Balance (PoB):  11 cm
    Blade: High Carbon Steel
    Edge: Blunt
    Pommel: Peened
    Scabbard: Leather, Wood, Brass

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £106.67 Incl. Tax: £128.00

  • Black Marauder Rapier

    This pretty hand forged sword is made by the master smiths at Windlass Steelcrafts. It includes a lightning-quick rapier blade made of 1065 high carbon steel tempered to a tough spring. The entire tang is surrounded by an ornate hilt of blackened steel. The comfortable grip is wood covered in black leather. The rope motif at the parts hearkens back to the times of rigging, marauding ships and adventure.

    Includes matching scabbard with skull and crossbones motif at the metal foot. Best possible for a captain of scalawags that has only a hint of nobility in him. Start your collection with this amazing sword or complete your swashbuckler outfit in a reasonably priced way that does not compromise on quality. Wood Grip is Covered in Black Leather and is Surrounded by an Ornate Hilt of Blackened Steel. Matching Scabbard with Skull and Crossbones Motif Included

    Blade Length: 82cm
    Blade: Blackened 1065 high carbon steel

    All dimensions are approximate and may vary from piece to piece.Learn More

    Excl. Tax: £111.25 Incl. Tax: £133.50

  • Arabian Scimitar

    The deeply curved blade of the Scimitar recalls battles between the Saracen and Crusader. The hardwood grips and hawksbill pommel are typical of the originals and create the perfect balance that makes this piece essential equipment for Eastern dance practitioners.

    Total length:
     
     97cm
    Blade length:  79cm
    Grip length:  12cm
    Weight:  1420g
    Blade: High Carbon Steel
    Edge: Sharp
    Pommel: Peened
    Scabbard: Not Included 

    All dimensions are approximate and may vary from piece to piece.

    Learn More
    Excl. Tax: £114.58 Incl. Tax: £137.50

6 Item(s)

Set Descending Direction
per page

Grid  List 

Registered Company number. 6769534 (England and Wales) UK Vat Number: 779 5190 76