All products

Our Red Dragon HEMA Synthetic Extended Pommel is twice as long as our standard scent-stopper pommels giving an extra 6.5cm of grip. This allows for the bulkiest of padded gloves and provides a lot of extra torque in the blade! The Extended Pommel will convert your single hand sword into a Bastard sword and give your Longsword blade an extra-long grip.

It is made from a special blend of plastic and powdered metal to increase the weight beyond what is achievable with plastic alone. The threaded brass "supertorque" insert offers much better purchase than conventional inserts allowing for a tight fit.

Designed and Manufactured in the U.K. 

Buy the Red Dragon HEMA Synthetic Extended Pommel with confidence from the UK’s leading HEMA equipment retailer.

Height: 12.8cm
Diameter (widest): 5cm
Diameter (narrowest): 2.5cm
Thread Size: M8
Weight: 106g
Materials: Plastic, Brass

*All sizes & weights are approximate.

A lot of time and effort went into the design of these guards. A balance between safety, durability and aesthetics is hard to achieve. They are based on an original 15th century historical design. The balls on the end of the quillons allow for a much safer guard with little risk of impalement.

They are manufactured from a very tough plastic which provides a good balance between impact and flexural strength. However, they are plastic and not steel and will break under less pressure than their metal counterparts. If you desire a stronger/heavier guard, we recommend that you purchase a Red Dragon HEMA Stainless Steel Longsword Guard. Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Longsword Guard with confidence from the UK’s leading HEMA equipment retailer.

Height: 2.7cm
Width: 24cm
Depth: 2.8cm
Weight: 40g
Materials: TPE

*All sizes & weights are approximate.

A lot of time and effort went into the design of these guards. A balance between safety, durability and aesthetics is hard to achieve. They are based on an original 15th century historical design. The balls on the end of the quillons allow for a much safer guard with little risk of impalement.

They are manufactured from a very tough plastic which provides a good balance between impact and flexural strength. However, they are plastic and not steel and will break under less pressure than their metal counterparts. If you desire a stronger/heavier guard, we recommend that you purchase a Red Dragon HEMA Stainless Steel Longsword Guard. Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Longsword Guard with confidence from the UK’s leading HEMA equipment retailer.

Height: 2.7cm
Width: 24cm
Depth: 2.8cm
Weight: 40g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Stainless Steel Longsword Guard is produced in an attractive matt finish and designed to be used with any of the Red Dragon HEMA synthetic blades in our range. 

This guard dramatically improves the handling of the Red Dragon HEMA synthetic swords. 
It increases the weight of Red Dragon HEMA Synthetic Sparring Longsword to 1112g and gives it a POB of 4".

Designed and Manufactured in the U.K. 

Buy the Red Dragon HEMA Stainless Steel Longsword Guard with confidence from the UK’s leading HEMA equipment retailer.

Height: 2.7cm
Width: 24cm
Depth: 2.8cm
Weight: 342g
Materials: TPE

*All sizes & weights are approximate.

A lot of time and effort went into the design of these guards. A balance between safety, durability and aesthetics is hard to achieve. They are based on an original 15th century historical design. The balls on the end of the quillons allow for a much safer guard with little risk of impalement.

They are manufactured from a very tough plastic which provides a good balance between impact and flexural strength. However, they are plastic and not steel and will break under less pressure than their metal counterparts. If you desire a stronger/heavier guard, we recommend that you purchase a Red Dragon HEMA Stainless Steel Longsword Guard. Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Longsword Guard with confidence from the UK’s leading HEMA equipment retailer.

Height: 2.7cm
Width: 24cm
Depth: 2.8cm
Weight: 40g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Longsword Blades.

Buy the Red Dragon HEMA Synthetic Longsword Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 20cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 60g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Longsword Blades.

Buy the Red Dragon HEMA Synthetic Longsword Grip with confidence from the UK’s leading HEMA equipment retailer.

Length: 90.5cm
Width (Hilt): 5.5cm
Width (Tip): 1.5m
Depth: 1.6cm
Weight: 564g
Materials: Plastic, Steel

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Longsword Blades.

Buy the Red Dragon HEMA Synthetic Longsword Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 20cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 60g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Longsword Blades.

Buy the Red Dragon HEMA Synthetic Longsword Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 20cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 60g
Materials: TPE

*All sizes & weights are approximate.