Regenyei Armory

Weight: 1940g (±30g)
Overall Length: 143cm
Blade: blunt edge & rounded tip
Blade Width (at the cross): 44mm
Blade Length: 108cm – from crossguard to tip
Blade Base Thickness: 6mm
Blade & Crossguard Material: 51CrV4 spring steel
Blade & Crossguard Hardness: 49-51 HRC
Side Fullers: 15cm
Main Fuller: 41cm
Crossguard: 30cm – “kurfürst” type – polished
Grip Length (including pommel): 34cm
Grip Shape: rectangular waisted
Grip Cover: half plain leather – half wire
Pommel: munich I. – polished
Point of balance: ~11cm – from crossguard
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Our “Munich” longsword is inspired by one of the most widely known examples of type XVIIIb (inventory No. W 872.1) in the Bayerisches Nationalmuseum in Munich, Germany. Also if you are familiar with the work of Albrecht Dürer, you can spot a sword of very similar proportions on one of his most famous and most complex artworks –Knight, Death and the Devil (1513).

Weight: 1490g (±20g)
Overall Length: 126cm
Blade Length: 93cm
Blade Width (at the cross): 40mm
Blade Base Thickness: 6mm
Blade & Crossguard Material: 51CrV4 spring steel
Blade & Crossguard Hardness: 49-51 HRC
Crossguard: 24cm – “munich” type – polished
Grip Length (including pommel): 31cm
Grip Shape: Rectangular waisted
Grip Cover: Plain leather – optional color
Pommel: Munich I./II. – polished
Point of Balance: ~7.5cm – from cross

All dimensions are approximate and may vary from piece to piece.

Weight: 1450g (±20g)
Full Length: 130cm
Blade Length: 98cm – from guard to tip
Blade Width (at the cross): 37mm
Blade Base Thickness: 6mm
Blade & Crossguard Material: 51CrV4 spring steel
Blade & Crossguard Material: 49-51 HRC
Fuller: 35cm
Crossguard: 24cm – “straight I.” type – polished
Grip Length: 31cm – including pommel
Grip Shape: oval
Grip Cover: spiral leather – optional color
Pommel: pear – burnt
Point of Balance: ~8,5cm – from guard
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Weight: 1300g (±20g)
Overall Length: 122cm
Blade Length: 94cm – from crossguard to tip
Blade Width (at the cross): 40mm
Blade Base Thickness: 6mm
Blade & Crossguard Material: 51CrV4 spring steel
Blade & Crossguard Hardness: 49-51 HRC
Crossguard: 24cm – “snail” type – polished
Grip Length: 27cm – including pommel
Grip Shape: Oval
Grip Cover: Wired spiral leather – optional color
Pommel: Disc I. – burnt
Point of Balance: ~8cm – from crossguard
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Our “Light” saber is the lighter version of our “Tournament” saber. It combines agility and durability therefore it’s the common choice for every day’s practice, although its not recommended for tournaments.

Total Length: 100cm
Blade Length: 85cm
Weight: 720g
Blade thickness (base): 5mm
Point of Balance (PoB): 13cm
Blade: 51CrV4 spring steel (49-51 HRC)
Edge: Blunt
Tip: Back-folded

All dimensions are approximate and may vary from piece to piece.

When you need to get the job done, nothing quite beats the Regenyei Armory Tournament Sabre. It is built for full contact sparring and is also suitable for the rigours of tournament use. The blade is flexible enough for full-strength trusts, but because of its high durability, it won’t let you down in the middle of your most important fight. We will say that this blade is quite stiff though, so if you can avoid being hit by a thrust, do so! (but that’s kind of the point!).

The perforated guard is functional and decorative and robust enough to keep your hand safe. The wooden grip is cord wrapped and is capped by hexagon nut pommel, to allow for disassembly.

Total Length: 100cm
Blade Length: 86.5cm
Grip Length: 14cm
Weight: 910g
Blade Thickness (base): 5mm
Point of Balance (PoB): 13cm
Blade: 51CrV4 spring steel
Edge: Blunt
Pommel: Hexagonal Nut
Scabbard: None

All dimensions are approximate and may vary from piece to piece.