Windlass Steelcrafts

The 1840 non commissioned sword was carried by American soldiers for over 70 years; a period which included the Mexican War, Civil War and Spanish American War.

The single edged blade has a single broad fuller running from the ricasso to near the point. The entire hilt is cast brass and the grip is ribbed. Pommel is global with a capstan. Grip is flanked by kidney-shaped hand guards.

Made by Windlass Steelcrafts. The 1840 NCO sword comes with a steel scabbard.

Total Length: 96cm
Blade Length: 80cm
Blade Thickness: 0.5cm
Blade Width at Base: 2.2cm
Grip Length: 9cm
Point of Balance: 8.7cm
Weight: 811g
Edge:Sharp
Pommel: Peened

All dimensions are approximate and may vary from piece to piece.

The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability. The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonymous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap.

The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.

Total Length: 101.5cm
Blade Length: 82.5cm
Blade Width: 6.5cm
Blade Thickness: 4.3mm
Point of Balance (PoB): 10cm
Weight: 1.6kg
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Our stunning version of the Suontaka Viking Sword features a highly detailed knotwork pommel, guard, grip band and inserts. All have been lavishly plated in rich copper.

The tough 1065 high carbon steel blade has a full tang and is fully tempered, then peened over the pommel. The sword comes complete with a rich leather scabbard and matching copper fittings and sports a baldric for wearing this powerful piece.

Total Length: 94cm
Blade Length: 78cm
Blade Width: 4.5cm
Blade Thickness: 0.5cm
Weight: 1389g
Material: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather Scabbard with Copper Fittings & Baldric

All dimensions are approximate and may vary from piece to piece.

Known first as a Cossack weapon that was used on horseback, the sword type was made the official officer’s sword of the Soviet Union. Brass pommel is marked with star, sickle and hammer. Grip is hand carved hardwood. Tempered high carbon blade. Made by Windlass Steelcrafts.

Total Length: 96cm
Blade Length: 82.5cm
Weight: 1026g
Edge: Blunt - Sharpenable
Point of Balance: 17cm
Thickness at Base: 0.6cm
Width at Base: 3cm
Grip Length: 10cm
Pommel: Nut

All dimensions are approximate and may vary from piece to piece.

The blade is made from hand-forged high carbon steel and properly heat tempered. The shoulder of the blade is stamped "E G W KNIFE" just as in the original. The contoured and grooved close-grained dark finished wood handle sits well in the hand and the front and rear hand guards help give it a secure grip. Pommel features a lanyard ring and the top grained leather sheath is riveted and sewn with waxed linen thread. Fits belts up to 6.5 cm (2 1/2") wide.

Overall Length: 28.6 cm
Blade Length: 17.8 cm
Blade Thickness: 4.8 mm
Weight: 280 g
Blade Edge: Sharp
Sheath: Leather

All dimensions are approximate and may vary from piece to piece.

Large daggers were carried by knights and men-at-arms. While they were used for camp chores, they were mainly used on the battlefield where they were often the last line of defence.

This classic form has a steel wheel pommel and down curving guard. The grip is wood covered in leather and the wide, strongly pointed blade is from tempered high carbon steel. Includes matching scabbard.

Overall Length: 45cm
Blade Length: 30.5cm
Blade Width: 4.5cm
Blade Thickness: 0.5cm
Weight: 567g
Material: 1055 High Carbon Steel
Edge: Blunt can be sharpened

All dimensions are approximate and may vary from piece to piece.

This fantasy fighting knife has a blackened blade, cast metal hilt and, metal and leather scabbard.

Includes metal and leather scabbard.

Total length: 49 cm
Blade length: 33.5 cm
Weight: 492g
Blade thickness (base): 0.4 cm
Blade thickness (CoP): 0.4 cm
Blade width: 4 cm
Point of Balance (PoB): advanced, 3.5 cm, by the guard
Blade: 1095 Carbon Steel
Edge: Sharp 
Scabbard: Black Leather & Steel

All dimensions are approximate and may vary from piece to piece.

A rapier of this identical form and proportions is currently housed in The Royal Armouries (formerly the Tower of London).

The flamboyantly formed hilt is both beautiful and functional. It’s forward plates are pierced and show lavish birds among foliage, while the bars of the guard are slender both defending the hand and having an upward loop to catch an opponent’s blade. The heavy pommel allows for a more balanced feel for fighting. The blade is etched on both sides of the ricasso with the Latin phrase CHRISTUS IMPERAT which means “Christ Commands.”

Total Length: 119cm
Blade Length: 103cm
Blade Width: 2.5cm
Blade Thickness: 0.48cm
Weight: 1361g
Grip Length: 8.9cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Brought back by popular demand, we are pleased to offer this Windlass Classic bastard sword. This massive broad sword could have easily been used at the Battle of Bosworth Field in 1485, cutting and slashing its way through the Tudor ranks. As large as this sword is, it is still amazingly light and well balanced.

The wide blade is forged of high carbon steel, while the pommel and cross guard have been antiqued with a darkened, aged finish. The large 7" handle is wrapped in soft black leather with a steel separator ring and can easily accommodate two hands. Made by Windlass Steelcrafts.

Total Length: 113cm
Blade Length: 88.5cm
Blade Width: 5.3cm
Blade Thickness: 0.5cm
Weight: 1640g
Grip Length: 16.5cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.