Windlass Steelcrafts

In many fantasy novels, there has been a mystical, magical sword carried by the worthy hero. Keeping with this mighty tradition comes the Windsong Sword of Kings.

This powerful blade, made by Windlass Steelcrafts, is a high carbon steel beauty! The long blade has a wide fuller travelling almost its full length. This two-handed sword has a regal lion’s face decorating the stone-shaped guard, which has been given an antique finish along with the imposing matching pommel. The grip has been expertly wrapped with soft, blood-red leather for a good strong grip.

This stunning sword comes with a matching, blood-red leather-covered wooden scabbard with an antique steel lion head on its throat.

Total Length: 118cm
Blade Length: 86cm
Blade Width: 5.7cm
Handle Length: 14cm
Weight: 1956g
Scabbard: Wood, Red Leather & Metal

All dimensions are approximate and may vary from piece to piece.

Robert the Bruce, King of Scots, was one of the most famous warriors of his generation. He eventually, alongside William Wallace, led Scotland during the first of the Wars of Scottish Independence against England. He fought successfully during his reign to regain Scotland's place as an independent nation and is today remembered in Scotland as a national hero.

This heroic sword is as powerful as the man who would have wielded it. The master craftsmen of Windlass Steelcrafts have hand forged this blade of high carbon steel. The beautiful pommel emblazons the Cross of St. Andrew, while the hearty grip is wrapped in soft, black leather and held in place by a corded silver chain. This massive sword comes complete with a matching, thick black leather scabbard and sports a silver Lion of Scotland at its throat and a rounded silver metal shoe at its tip. A 1-1/2” wide belt, measuring 56-1/2" long, is attached.

Total Length: 110cm
Blade Length: 91cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Weight: 1701g
Material: 1065 High Carbon Steel
Edge: Blunt, can be sharpened
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

The runic alphabet is etched across its blade. The Vikings believed runes possessed magical power and often inscribed them onto weapons to increase power. Copied from a Norse seax on display at the British Museum, this historical replica was crafted from high-quality materials with exceptional attention to detail and craftsmanship.

The etching runs along the spine of the high carbon steel blade. The leather-wrapped handle gives you a firm grip on this surprisingly light and quick weapon. The Runic Long Seax comes with a brown leather scabbard and two back-belt hanging straps.

Total Length: 74cm
Blade Length: 58cm
Blade Width (base): 3.5cm
Blade Material: High Carbon Steel
Weight: 434g 
Edge: Blunt
Scabbard: Stitched Leather

All dimensions are approximate and may vary from piece to piece.

This fine reproduction saber is a faithful copy of ones used. The hand forged blade is British military spec steel that will flex over 20° and return to true. The leather handle is wire wrapped. Befitting their rank, this sword displays a high degree of ornamentation. The brass guard has hand chased foliage and "U.S." between the branches. The blade is etched with foliage, military trophies, "U.S.", "E Pluribus Unum" and "Iron Proof."

During the years before the war, many Confederate officers, including General Robert E. Lee carried this sword in the Indian campaigns. The full tang is peened and visible through the solid brass pommel, scabbard is blue steel. Made by Windlass Steelcrafts.

Total Length: 89cm
Blade Length: 76cm
Thickness at Base: 0.62cm
Width at Base: 2.6cm
Grip Length: 9.5cm
Weight: 978g
Point of Balance: 14cm
Material: 1065 High Carbon
Edge: Blunt can be sharpened

All dimensions are approximate and may vary from piece to piece.

The dirks used during the Scottish Renaissance are advanced developments of the kidney dagger and emerged in the form shown toward the end of the 16th century. The blade is long and single-edged, and it even has a false edge close to the point. Three decorative fullers are offset toward the back edge, not centred.

The riveted, hardwood grip is carved with a lozenge pattern that fits any hand well. Our Scottish Renaissance dirk comes with a scabbard including a mount and chape made of metal. The scabbard is also designed to be used with a holder.

Total length: 53 cm
Blade length: 38 cm
Handle length: 9 cm
Blade thickness (base): 5 mm
Blade width (base): 3.7 cm
Weight: 0.44 kg
Edge: Sharp
Scabbard: Leather, Wood, Steel 

All dimensions are approximate and may vary from piece to piece.

Buy the Scottish Renaissance Dirk with confidence from the UK’s leading Scottish Dirk retailer.

This beautiful Centurion gladius has a hand forged and tempered high carbon steel blade; it is truly worthy of a Roman officer.

All antiqued parts are meticulously hand finished of solid wood with metal accents to complete this regal piece. Features a baldric with a custom wood scabbard wrapped in leather and accented with real metal detail.

Overall Length: 71cm
Blade Length: 50cm
Blade Thickness: 0.5cm
Weight: 765g
Grip Length: 11.5cm
Material: 1065 High Carbon Steel
Edge: Blunt/Sharpenable
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Every army needs a close-quarters weapon, even when it has guns because it’s inevitable that somebody’s going to end up within breathing distance of an enemy occasionally. This dagger was often dubbed “Le Vengeur de 1870”  (The Avenger of 1870), a wistful reference to the French loss to the Prussian Army in 1870. The design was simple and practical enough to last into WWII. Proving that the sincerest form of flattery is actually thievery, Germany confiscated large quantities of these knives when they defeated France and took them on their roadshow to Norway.

Originals now sometimes sell for over $250 on the antique weapons market. The blade design inspired the US M1918 Trench Knife (of course, with the addition of the famous “knuckle” grip). Like the originals, this stout replica has a 6-3/4″ blade and is 11″ overall. Steel scabbard replicates the original.

Overall Length: 28cm
Blade Length: 17cm
Blade: High Carbon Steel
Edge: Sharp

All dimensions are approximate and may vary from piece to piece.

After hundreds of requests, Battlecry has added a classic rapier to the popular line of blackened, uniquely finished versions of history's great swords. This rapier features a very complex Spanish-style hilt and faceted pommel. The grip is hand-wound with blackened wire with woven wire rings on top and bottom.

The hand-forged, high carbon steel, fully tempered blade features a diamond cross-section to strengthen it for thrusting. Top-quality, genuine leather scabbard with deeply engraved floral pattern on the throat and tip. This type of sword was deadly effective as a dueling weapon. The 1065 high carbon steel has a darkened, battle-hardened finish, so it’s well protected from the frequent rust spots and stains that occur so often from everyday practice and exposure to the elements. The blade has an extra-wide tang and is tempering to a low 50s RC. The blade is thick for strength and peened to the pommel. This pre-sharpened blade has gone through rigorous testing.

The hands-on nature of the manufacturing by master smiths makes this line unique. Includes a certificate of authenticity signed by each smith that touched your blade through every step of the forging process.

Total Length: 112cm
Blade Length: 90cm
Blade Material: 1065 High Carbon Steel
Blade Width: 2.6cm
Edge: Sharp
Weight: 907g

All dimensions are approximate and may vary from piece to piece.

Battlecry has added every swashbuckler’s and pirate’s favorite sword to its line: the Cutlass. The Cutlass was prized for its compact length, which was more suitable for the tight confines of a ship. This Battlecry Cutlass would do any seafarer proud, with a slightly upswept blade that has a clip point tip that’s perfect for thrusting.

The basket is attractively decorated with cut-outs. Top-quality, genuine leather scabbard with metal throat and chape. Scabbard includes attached frog and belt loop. The 1065 high carbon steel has a darkened, battle-hardened finish, so it’s well protected from the frequent rust spots and stains that occur so often from everyday practice and exposure to the elements.

The blade has a full tang and is tempered to a low 50s RC. This pre-sharpened blade has gone through rigorous testing. The hands-on nature of the manufacturing by master smiths makes this line unique.

Includes a certificate of authenticity signed by each smith that touched your blade through every step of the forging process. Also includes "Battlecry" sticker.

Total Length: 74cm
Blade Length: 62cm
Blade Width: 3.2cm
POB: 14.6cm from guard
Blade: 1065 High Carbon Steel 
Edge: Sharp 
Weight: 907g

All dimensions are approximate and may vary from piece to piece.