HEMA Club Member Discounts

Our “scent stopper” pommel is classified as an Oakeshott T5 and is quite a complex object to mould. It is made from a special blend of plastic and powdered metal to increase the weight beyond what is achievable with plastic alone. The threaded brass "supertorque" insert offers much better purchase than conventional inserts allowing for a tight fit.

Should you require a heavier pommel please see our Red Dragon HEMA Stainless Steel Pommel. Designed and Manufactured in the U.K. 

Buy the Red Dragon HEMA Synthetic Scent Stopper Pommel with confidence from the UK’s leading HEMA equipment retailer.

Height: 6.5cm
Diameter (widest): 5cm
Diameter (narrowest): 2.5cm
Thread Size: M8
Weight: 82g
Materials: Plastic, Brass

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Longsword Blades are manufactured from our own special blend of plastic to provide strong and flexible sparring blade. They are designed to flex along the last 1/3 of their length towards the tip allowing for much safer thrusting than with conventional wooden wasters or shinai. The blade/tang joint (traditionally a weak point) is reinforced by a high tensile steel rod running along the full length of the handle. This also removes any flex in the handle traditionally associated with plastic training swords. The edges are left smooth to prevent friction burns but can be roughened with sandpaper for a better bind.

Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Longsword Blade with confidence from the UK’s leading HEMA equipment retailer.

Height: 120cm
Width (Hilt): 5.5cm
Width (Tip): 2.1cm
Depth: 1.7cm
Weight: 606g
Materials: Plastic, Steel

All dimensions are approximate and may vary from piece to piece.

Our Red Dragon HEMA Synthetic Longsword Blades are manufactured from our own special blend of plastic to provide strong and flexible sparring blade. They are designed to flex along the last 1/3 of their length towards the tip allowing for much safer thrusting than with conventional wooden wasters or shinai. The blade/tang joint (traditionally a weak point) is reinforced by a high tensile steel rod running along the full length of the handle. This also removes any flex in the handle traditionally associated with plastic training swords. The edges are left smooth to prevent friction burns but can be roughened with sandpaper for a better bind.

Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Longsword Blade with confidence from the UK’s leading HEMA equipment retailer.

Height: 120cm
Width (Hilt): 5.5cm
Width (Tip): 2.1cm
Depth: 1.7cm
Weight: 606g
Materials: Plastic, Steel

All dimensions are approximate and may vary from piece to piece.

Our Red Dragon HEMA Synthetic Longsword Blades are manufactured from our own special blend of plastic to provide strong and flexible sparring blade. They are designed to flex along the last 1/3 of their length towards the tip allowing for much safer thrusting than with conventional wooden wasters or shinai. The blade/tang joint (traditionally a weak point) is reinforced by a high tensile steel rod running along the full length of the handle. This also removes any flex in the handle traditionally associated with plastic training swords. The edges are left smooth to prevent friction burns but can be roughened with sandpaper for a better bind.

Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Longsword Blade with confidence from the UK’s leading HEMA equipment retailer.

Height: 120cm
Width (Hilt): 5.5cm
Width (Tip): 2.1cm
Depth: 1.7cm
Weight: 606g
Materials: Plastic, Steel

All dimensions are approximate and may vary from piece to piece

A lot of time and effort went into the design of these guards. A balance between safety, durability and aesthetics is hard to achieve. They are based on an original 15th century historical design. The balls on the end of the quillons allow for a much safer guard with little risk of impalement.

They are manufactured from a very tough plastic which provides a good balance between impact and flexural strength. However, they are plastic and not steel and will break under less pressure than their metal counterparts. If you desire a stronger/heavier guard, we recommend that you purchase a Red Dragon HEMA Stainless Steel Longsword Guard. Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Single Hand Guard with confidence from the UK’s leading HEMA equipment retailer.

Height: 2.7cm
Width: 20.2cm
Depth: 2.3cm
Weight: 33g
Materials: TPE

*All dimensions are approximate and may vary from piece to piece

A lot of time and effort went into the design of these guards. A balance between safety, durability and aesthetics is hard to achieve. They are based on an original 15th century historical design. The balls on the end of the quillons allow for a much safer guard with little risk of impalement.

They are manufactured from a very tough plastic which provides a good balance between impact and flexural strength. However, they are plastic and not steel and will break under less pressure than their metal counterparts. If you desire a stronger/heavier guard, we recommend that you purchase a Red Dragon HEMA Stainless Steel Longsword Guard. Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Single Hand Guard with confidence from the UK’s leading HEMA equipment retailer.

Height: 2.7cm
Width: 20.2cm
Depth: 2.3cm
Weight: 33g
Materials: TPE

*All dimensions are approximate and may vary from piece to piece

A lot of time and effort went into the design of these guards. A balance between safety, durability and aesthetics is hard to achieve. They are based on an original 15th century historical design. The balls on the end of the quillons allow for a much safer guard with little risk of impalement.

They are manufactured from a very tough plastic which provides a good balance between impact and flexural strength. However, they are plastic and not steel and will break under less pressure than their metal counterparts. If you desire a stronger/heavier guard, we recommend that you purchase a Red Dragon HEMA Stainless Steel Longsword Guard. Designed and Manufactured in the U.K.

Buy the Red Dragon HEMA Synthetic Single Hand Guard with confidence from the UK’s leading HEMA equipment retailer.

Height: 2.7cm
Width: 20.2cm
Depth: 2.3cm
Weight: 33g
Materials: TPE

*All dimensions are approximate and may vary from piece to piece

Our Red Dragon HEMA Synthetic Single Hand Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K. 

Designed to fit our Red Dragon HEMA Synthetic Single Hand and Messer Blades.

Buy the Red Dragon HEMA Synthetic Single Hand Grip with confidence from the UK’s leading HEMA equipment retailer.

Height: 11.8cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 34g
Materials: TPE

*All sizes & weights are approximate.

Our Red Dragon HEMA Synthetic Single Hand Grips are manufactured from a rubber-like thermoplastic elastomer designed to absorb the impact of strikes as they are transmitted along the blade. They are designed to slide off the Sword's tang with relative ease and will compress for a tight fit. Designed and Manufactured in the U.K.

Designed to fit our Red Dragon HEMA Synthetic Single Hand and Messer Blades.

Height: 11.8cm
Diameter (widest): 3.6cm
Diameter (narrowest): 2.5cm
Depth: 2.4cm
Weight: 34g
Materials: TPE

*All sizes & weights are approximate.

Buy the Red Dragon HEMA Synthetic Single Hand Grip with confidence from the UK’s leading HEMA equipment retailer.