Damaged Stock

DAMAGE: Pommel off centre, twisted blade
Quantity: 3

Our Tourney Series Sparring and Stage Swords will set a new standard in this price point of re-enactment weaponry. Features like thru-tang handle construction, peened stainless steel pommel and guard and 2mm rounded edge thickness. 

The cord wrapped leather grip feels exceptional in the hand with an oval cross section and slight barrel shape to keep fatigue at bay. The grip is large enough to accommodate armoured hands. A respectable fuller runs the length of the blade to lighten and counter balance the sword overall.

The blade is forged from 9260 spring steel and is tempered to around 50 Hrc. A wood core and leather wrapped scabbard tipped with a stainless chape comes with each sword. The guard needs special mention, featuring the King-Peen system. King-Peen is essentially a steel tab on the guard under the grip that is pinned through the tang of the sword. This process keeps the guard from working loose without compromising the strength of the hilt. The pommel is pressed into place and hot peened. 

Overall Length: 93cm
Blade Length: 76cm
Handle Length: 11cm
Weight: 1417g
Blade: 9260 Spring Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Bent Blade
Quantity: 3

This Arming Sword is a great functional sword; with leather wrapped handles and a wood core, thru-peened stainless steel pommel and guard. The 9260 Spring Steel forged blade features a typical Type XIV shape with a long fuller and mirror polish finish.

This sword comes with a wood core leather wrapped scabbard with stainless steel chape for safe and secure carry.

Overall Length: 88cm
Blade Length: 72cm
Handle Length: 10.5cm
Weight: 1105g
Blade Steel: 9260
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Bent blade
Quantity:3

The Knight’s Sword is a great functional sword, with leather wrapped handles and a wood core, thru-peened stainless steel pommel and guard. The 9260 Spring Steel forged blade features a diamond cross section and a mirror polish finish.

This sword comes with a wood core leather wrapped scabbard with stainless steel chape for safe and secure carry.

Overall Length: 84cm
Blade Length: 68cm
Handle Length: 11cm
Guard Width: 11cm
Weight: 1048g
Blade: 9260 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Chip on pommel
Quantity: 1

This sword is considered by some to be the best fighting sword ever issued to a British Officer. As such it has never been replaced and is the current issue sword within the British Army. The only difference between this sword and its Victorian predecessor is the cypher of the reigning monarch at the time of issue. The polished blade has been forged from AISI 1065 High Carbon Steel and has been well tempered. Includes regulation pattern steel scabbard. 

Our Premium line is a step up in quality from our standard model. The steel guard has been made by CNC to ensure high precision cuts and features a thick nickel plating (above 12 micron). The grip is made from real fish skin (stingray) and bound with nickel plated wires. The regulation pattern steel scabbard also features a thick nickel plating (above 12 micron). 

Total Length: 99cm
Blade Length: 84cm
Grip Length: 11cm
Grip: Fish Skin (Stingray), Nickel Plated Wires
Guard: Nickel Plated Steel
Weight: 1.1kg
Blade Thickness (base): 0.6cm
Blade Width (base): 2.5cm
Point of Balance (PoB): 15cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Discoloured brass around scabbard loops
Quantity: 1

The British Officer’s 5 Ball Spadroon was introduced in the 1780’s and was the first attempt at a uniform pattern sword for the British Military. It was called the 5 Ball Spadroon because of the decoration on the guard. This sword style was popular for both Infantry and Naval Officers and there were a number of variations of the pattern in use. This sword is a faithful replica of the one worn by the wax mannequin of Lord Nelson that was placed on display in Westminster Abbey in 1806.

It features an undecorated, tempered high-carbon steel blade. The ornate brass hilt features a side ring and reeded faux ivory grip intersected with a brass band featuring a fouled anchor and crown. The wooden scabbard is covered with black leather and features brass fittings and 2 hanging rings. The locket is stamped with the fouled anchor on one side and “Richard Teed, Strand” on the reverse.

Total length: 99cm
Blade length: 83.5cm
Grip length: 9.5cm
Weight: 844g
Blade thickness (base): 0.6cm 
Blade width (base): 2.5cm
Point of Balance (PoB): 17cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Wire on handle snapped
Quantity: 2

This full-sized sword, which measures nearly three feet in length, from tip to hilt is styled beautifully with a bronze guard and pommel. The handgrip was crafted with a raised middle section of three bronze rings. A wide fuller groove runs down 3/4 of the blade to reduce the weight, yet still retain critical blade strength. Eowyn achieved true heroism as she succeeded in the slaying of the Witch-King and his fell steed.

Constructed with a 30 1/8" tempered 420 J2 stainless steel blade. The handle features a solid metal guard and pommel with an antiqued brass plated finish, the hilts are cast in the symbols of the famed horsed of Rohan and the grip is genuine leather wrapped. Includes a parchment certificate of authenticity and 11" x 10 5/8" x 3/4" wood display plaque. 36 1/2" overall.

Length: 93cm
Plaque: 28cm x 27cm x 2cm

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Mark on the guard & rusty pommel. 
Quantity: 1

This iconic sword was wielded by the immortal Kurgan in the cult 80’s movie Highlander. He is first seen wielding it in his battle against the Clan Macleod in 1536 where he wounds Connor Macleod and almost takes his head. The Kurgan also wields this sword when he defeats and beheads Connor’s mentor Ramirez. The last time this sword is seen is during his final epic battle with Connor Macleod.

This item is now out of license but made to the same exact specifications as the original licensed product. Our Kurgan Sword is a product of the famous Marto sword factory in Toledo, Spain. It features cast metal hilt parts with retractable blade spikes and a leather-wrapped grip. The massive 420 stainless steel blade has a mirror polished finish.

Length: 125cm
Blade Length: 97cm
Weight: 3kg

All dimensions are approximate and may vary from piece to piece.

Buy the Highlander - Kurgan Sword with confidence from the UK’s leading movie sword retailer.

DAMAGE: Shop soiled
Quantity: 3

Rooted deeply in Chinese culture going back to the Neolithic age and first finding expression during the Shang and Zhou dynasties as a monster mask on bronze ritual vessels, the legend of the taotie still manifests in modern cutlery on eating utensils and plates. The Taotie (gluttonous monster) consumes permissively and according to myth eventually human flesh. Punished by the gods for his overindulgence, as a warning to others the gods took away his body and jaw so all he can do was eat constantly, leaving nothing but a head and gaping mouth.

Overall: 131cm
Blade Length: 96cm
Handle Length: 32cm
Weight: 1077g
Point of Balance: 15cm
Blade Steel: 5160
Blade Edge: Sharp

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Wooden box has deep scratches, light scratches at top of blade.
Quantity: 1

The original Beile (Lord in Manchu), also known as the "Banner Lords" and "Iron- Capped Princes" were the sons of Nurgaci, founder of Qing Dynasty. After his death the Beile Hong Taiji was selected as Khan.

Our Beile Dao commemorates this prince. Its beautifully detailed Iron furniture complements the patterning of the Damascus blade and the rayskin covered scabbard adds to the rugged richness of the sword.

Total Length: 91.5cm
Blade Length: 73.5cm
Grip Length: 11cm

All dimensions are approximate and may vary from piece to piece.