Damaged Stock

DAMAGE: Broken apart
Quantity: 1

Charles I of Spain and V of the Holy Roman Empire, called "Caesar", is elected Holy Roman Emperor on the death of his grandfather Maximilian in 1519. Charles I of Spain and V of Germany was known in his time as "THE Emperor" since no king ever managed to gather under his command such an immense empire. 

He retired to the Monastery of Yuste where he remained a year and a half in retreat, away from the cities and political life, and accompanied by the order of the Jerónimos who spiritually guided the monarch until his last days. On 21 September 1558 he died of malaria. The coffin of Carlos I is located in the Royal Crypt of the Monastery of El Escorial known as the Pantheon of the Kings.

Total Length: 75cm
Edge: Blunt
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Tang shredded so blade & hilt are detached.
Quantity: 1

After hundreds of requests, Battlecry has added a classic rapier to the popular line of blackened, uniquely finished versions of history's great swords. This rapier features a very complex Spanish-style hilt and faceted pommel. The grip is hand-wound with blackened wire with woven wire rings on top and bottom.

The hand-forged, high carbon steel, fully tempered blade features a diamond cross-section to strengthen it for thrusting. Top-quality, genuine leather scabbard with deeply engraved floral pattern on the throat and tip. This type of sword was deadly effective as a dueling weapon. The 1065 high carbon steel has a darkened, battle-hardened finish, so it’s well protected from the frequent rust spots and stains that occur so often from everyday practice and exposure to the elements. The blade has an extra-wide tang and is tempering to a low 50s RC. The blade is thick for strength and peened to the pommel. This pre-sharpened blade has gone through rigorous testing.

The hands-on nature of the manufacturing by master smiths makes this line unique. Includes a certificate of authenticity signed by each smith that touched your blade through every step of the forging process.

Total Length: 112cm
Blade Length: 90cm
Blade Material: 1065 High Carbon Steel
Blade Width: 2.6cm
Edge: Sharp
Weight: 907g

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Nickel plating chipped on guard & rust inside scabbard
Quantity: 1

This sword is considered by some to be the best fighting sword ever issued to a British Officer. As such it has never been replaced and is the current issue sword within the British Army. The only difference between this sword and its Victorian predecessor is the cypher of the reigning monarch at the time of issue. The polished blade has been forged from AISI 1065 High Carbon Steel and has been well tempered. Includes regulation pattern steel scabbard. 

Our Premium line is a step up in quality from our standard model. The steel guard has been made by CNC to ensure high precision cuts and features a thick nickel plating (above 12 micron). The grip is made from real fish skin (stingray) and bound with nickel plated wires. The regulation pattern steel scabbard also features a thick nickel plating (above 12 micron). 

Total Length: 99cm
Blade Length: 84cm
Grip Length: 11cm
Grip: Fish Skin (Stingray), Nickel Plated Wires
Guard: Nickel Plated Steel
Weight: 1.1kg
Blade Thickness (base): 0.6cm
Blade Width (base): 2.5cm
Point of Balance (PoB): 15cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: Steel

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Chip in nickel plating on pommel
Quantity: 1

This sword is considered by some to be the best fighting sword ever issued to a British Officer. As such it has never been replaced and is the current issue sword within the British Army. The only difference between this sword and its Victorian predecessor is the cypher of the reigning monarch at the time of issue. The polished blade has been forged from AISI 1065 High Carbon Steel and has been well tempered. Includes regulation pattern steel scabbard. 

Our Premium line is a step up in quality from our standard model. The steel guard has been made by CNC to ensure high precision cuts and features a thick nickel plating (above 12 micron). The grip is made from real fish skin (stingray) and bound with nickel plated wires. The regulation pattern steel scabbard also features a thick nickel plating (above 12 micron). 

Total Length: 99cm
Blade Length: 84cm
Grip Length: 11cm
Grip: Fish Skin (Stingray), Nickel Plated Wires
Guard: Nickel Plated Steel
Weight: 1.1kg
Blade Thickness (base): 0.6cm
Blade Width (base): 2.5cm
Point of Balance (PoB): 15cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Rusted blade
Quantity: 1

The French military based this sword on the famous and effective Roman Gladius, the standard short sword of the Roman Legionnaires. Originally issued in 1816, the solid brass hilt had a grip that resembled fish scales. When the sword was updated and reissued as the Model 1831, the grip was redesigned with a ringed pattern.

Although it could be used as a combat weapon in a pinch, it was primarily used as a machete to clear fields for guns. Because of its usefulness as an all-around tool, it gained a nick-name, “coupe-chou” (roughly translating to “cabbage cutter”). The Model 1831 remained in service until about 1870, and its design was adapted by the United States to create the Model 1832 Foot Artillery Sword.

This faithful replica is just like the originals, with a solid brass hilt and a scabbard with a brass tip and throat. Also includes belt frog. Provided with a sharpened edge.

Total Length: 64cm
Blade Length: 49cm
Blade Width: 4.4cm
Blade Material: 1075 High Carbon Steel
Weight: 1.2kg
Edge: Sharp

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Wooden box has deep scratches, light scratches at top of blade.
Quantity: 1

The original Beile (Lord in Manchu), also known as the "Banner Lords" and "Iron- Capped Princes" were the sons of Nurgaci, founder of Qing Dynasty. After his death the Beile Hong Taiji was selected as Khan.

Our Beile Dao commemorates this prince. Its beautifully detailed Iron furniture complements the patterning of the Damascus blade and the rayskin covered scabbard adds to the rugged richness of the sword.

Total Length: 91.5cm
Blade Length: 73.5cm
Grip Length: 11cm

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Broken hilt
Quantity: 1

The Connor Macleod Katana was wielded by the immortal Connor Macleod in the cult 80’s movie Highlander. Connor took the sword upon the death of his friend and mentor Juan Sánchez Villa-Lobos Ramírez in 1547 at the hands of the Kurgan. It was forged by the legendary smith Masamune as a wedding gift for Ramirez, remarking it was “one of a kind”. This sword was used to defeat the Kurgan in 1985 and 10 years later (with a reforged blade) to defeat the immortal Kane.

This item is now out of license but made to the same exact specifications as the original licensed product. It features an impressively detailed faux ivory dragon-head handle, 420 stainless steel blade and black lacquered scabbard.

Length: 104cm
Blade Length: 70cm
Weight: 1.5kg
Blade: 420 Stainless Steel
Edge: Sharp
Scabbard: Lacquered Wood

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Top of staff cracked.
Quantity: 1

One of the most powerful Wizards in all of Middle-earth, Gandalf the Grey joins the quest to reclaim the Dwarf Kingdom of Erebor and the great treasure that lies within its stone halls from a fire-breathing dragon, Smaug the Terrible. Gandalf’s staff appears to be a natural piece of wood, but the crown of the shaft holds something supernatural. Within the crown, the wood has grown around a hollow, white lattice-shaped bulb. The lattice is vaguely Elven in design and holds great power. At Gandalf’s command, he can cause the crown to illuminate and light his way at night, or to spark a blue flame to ignite a fire.

Features a translucent lattice within the crown that holds a high-intensity white LED (100 lumens, 50,000 hour lifespan). The light is activated by a hidden button in the side of the staff and runs on two replaceable AA batteries housed on the bottom of the shaft. Crafted from the molds of the actual film prop in hard polyresin, this hand-painted staff comes with an Elven-styled wall display plaque and a Certificate of Authenticity. Batteries are not included.

Length: 185cm

All dimensions are approximate and may vary from piece to piece.