Weaponry

The Scramasax, carried by the Saxons and Vikings between the 4th and 10th centuries, was utilised as both a tool and a weapon. Carried horizontally at the back of the belt, the Scramasax provided the spearman with a close-quarters weapon when needed, and its broad blade could handle many day-to-day chores. The ancestry of the Scramasax, which evolved from similar weapons in bronze (and later iron) used by the Celts, is portrayed in the decoration of the guard and pommel.

Blade Length: 28.5cm
Overall Length: 45cm
Weight: 540g

All dimensions are approximate and may vary from piece to piece.

Buy the Saxon Scramasax with confidence from the UK’s leading Viking weaponry retailer.

The seax (also called sax, seaxe, and hadseax) was the weapon of choice of Germanic tribes between the early Middle Ages and the Viking era. There are many variations with many different blade lengths: the Merovingian Seax was used as a tool as well as a weapon.

Our lightweight broad seax has a distinctive blade form and its cutting edge is on the long side of the single-edged blade. A decorative lozenge pattern and stripes are etched into the blade on both sides. Brass studs in the wooden grip add to the decorative effect and also give you a better grip on this seax. The leather scabbard is riveted at the top and bottom and laces on one side.

Total Length: 48.5cm
Blade Length: 33cm
Grip Length: 8.5cm
Weight: 450g
Blade Thickness (base): 0.32cm
Blade Width (base): 4.1cm
Blade: High Carbon Steel
Edge: Sharp
Scabbard: Stitched Leather

All dimensions are approximate and may vary from piece to piece.

The runic alphabet is etched across its blade. The Vikings believed runes possessed magical power and often inscribed them onto weapons to increase power. Copied from a Norse seax on display at the British Museum, this historical replica was crafted from high-quality materials with exceptional attention to detail and craftsmanship.

The etching runs along the spine of the high carbon steel blade. The leather-wrapped handle gives you a firm grip on this surprisingly light and quick weapon. The Runic Long Seax comes with a brown leather scabbard and two back-belt hanging straps.

Total Length: 74cm
Blade Length: 58cm
Blade Width (base): 3.5cm
Blade Material: High Carbon Steel
Weight: 434g 
Edge: Blunt
Scabbard: Stitched Leather

All dimensions are approximate and may vary from piece to piece.

Large daggers were carried by knights and men-at-arms. While they were used for camp chores, they were mainly used on the battlefield where they were often the last line of defence.

This classic form has a steel wheel pommel and down curving guard. The grip is wood covered in leather and the wide, strongly pointed blade is from tempered high carbon steel. Includes matching scabbard.

Overall Length: 45cm
Blade Length: 30.5cm
Blade Width: 4.5cm
Blade Thickness: 0.5cm
Weight: 567g
Material: 1055 High Carbon Steel
Edge: Blunt can be sharpened

All dimensions are approximate and may vary from piece to piece.

This fantasy fighting knife has a blackened blade, cast metal hilt and, metal and leather scabbard.

Includes metal and leather scabbard.

Total length: 49 cm
Blade length: 33.5 cm
Weight: 492g
Blade thickness (base): 0.4 cm
Blade thickness (CoP): 0.4 cm
Blade width: 4 cm
Point of Balance (PoB): advanced, 3.5 cm, by the guard
Blade: 1095 Carbon Steel
Edge: Sharp 
Scabbard: Black Leather & Steel

All dimensions are approximate and may vary from piece to piece.

Our officially licensed Conan Atlantean Sword is the ancient sword that he finds whilst sheltering in a warrior’s tomb.

Forged by hand in 1085 carbon steel and tempered at 52 HRC for hardness. This sword is faithfully reproduced by master artisans of Windlass Steelcrafts® as an exact replica of the sword used on the screen. It is truly a masterful reproduction in both the intricate details of the guard and the pommel to the deep runes in the mighty blade.

Comes complete with a Certificate of Authenticity.

Buy the Conan the Barbarian Atlantean Sword – Carbon Steel Blade with confidence from the UK’s leading movie sword retailer.

Total Length: 99cm 
Blade Length: 71cm 
Weight: 3630g
Blade Material: Carbon Steel 1085

All dimensions are approximate and may vary from piece to piece.

Our officially licensed Conan Father Sword is the sword forged by Conan’s father is the opening credits of the film.

Hand-forged from 1085 high carbon steel and tempered to 52 HRC for strength, this sword has been expertly reproduced by the master craftsmen at Windlass Steelcrafts, as an exact replica of the sword used on screen. From the intricate details on the guard and pommel to the deep runes on the powerful blade, this is truly a masterful reproduction.

Comes complete with a Certificate of Authenticity.

Total Length: 98cm
Blade Length: 73.5cm
Weight: 3390g
Blade Material: Carbon Steel 1085

All dimensions are approximate and may vary from piece to piece.

Buy the Conan the Barbarian Father Sword - Carbon Steel Blade with confidence from the UK’s leading movie sword retailer.

Hand-forged from 1085 high carbon steel and tempered to 52 HRC for strength, this sword has been expertly reproduced by the master craftsmen at Windlass Steelcrafts, as an exact replica of the sword used on screen.

From the intricate details on the guard and pommel to the deep runes on the powerful blade, this is truly a masterful reproduction. Comes complete with a Certificate of Authenticity.

Total Length: 95.3cm
Blade Length: 66cm
Grip Length: 16.9cm
Weight: 1.8kg
Blade Thickness (base): 4.4mm
Blade Thickness (CoP): 5mm
Blade Width (base): 4.2cm
Blade Width (base): 4.3cm
Point of Balance (PoB): 7.5cm
Centre of Percussion (CoP): 28cm

All dimensions are approximate and may vary from piece to piece.

Buy the Conan Valeria Sword – Carbon Steel Blade with confidence from the UK’s leading movie sword retailer.

This deadly, battle-ready sword features an impressive, extravagant blade shape and also has convincing inner values. High quality carbon steel and an integrated tang give the blade its strength and add stability to the sword as a whole.

Frank Miller was consulted during the creation of this Spartan sword, so you can be assured that it is exactly like the one that plays such an important role in his comic. It comes with a matching scabbard covered in grained leather.

Total Length: 76 cm
Blade Length: 61 cm
Grip Length: 15 cm
Weight: 1310g
Blade: High Carbon Steel
Edge: Blunt
Pommel: Integrated
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

Buy Frank Miller's 300 Spartan Sword with confidence from the UK’s leading Greek sword retailer.