This replica is very similar to the sword that appears in the "Braveheart" movie, especially because Simon Atherton, the prop master for the "Braveheart" movie, was involved in its development.

Hand forged of 1095 carbon steel, the blade of this sword is approx. 120 cm long. It has a slight taper and ends in a pear-shaped, riveted pommel. The grip is made of wood wrapped in dark brown leather that also includes the ricasso. A crossguard with a rectangular profile and a langet with a decorative pattern complete the hilt.

Total length: 154cm
Blade length: 120cm
Grip length: 25.5cm
Weight: 3.03kg
Blade thickness (base): 4.7mm
Blade thickness (CoP): 4.4mm
Blade width (base): 5.0cm
Blade width (CoP): 5.0cm
Point of Balance (PoB): 25.5cm
Centre of Percussion (CoP): 39cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Sir William Wallace was a Scottish knight and one of the main leaders in the Wars of Scottish Independence.  In September 1297 he defeated the English army at the Battle of Stirling Bridge. After the battle he was appointed Guardian of Scotland and served until he was defeated at the Battle of Falkirk in 1298. He continued to fight for Scottish independence until he was captured in 1305 executed in London for crimes of High Treason.  In death his exploits passed into legend. Sir Walter Scott wrote about him in “Exploits and Death of William Wallace – the “Hero of Scotland”.

Our William Wallace Sword is a well-made replica of the sword used in the film. It is crafted in the world famous Art Gladius factory in Toledo, Spain and features a broad stainless steel blade topped with solid steel hilt fittings and a dark brown leather ricasso and grip. This sword features a blunt blade and is designed for display only. 

Total length: 139cm
Blade length: 103cm
Grip length:  25.5cm
Weight: 2914g
Blade thickness (base):  0.53cm
Blade width (base): 4.5cm
Blade: Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Sir William Wallace is best known from the 1995 blockbuster “Braveheart” starring Mel Gibson. Our William Wallace Sword is inspired by the sword used in the film.

It is crafted in the world famous Marto factory in Toledo, Spain and features a fully tempered AISI 440 stainless steel blade topped with solid steel hilt fittings and a brown suede leather ricasso and grip. This sword features a blunt blade and is designed for display only. 

Length: 133cm
Blade: AISI 440 Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Our William Wallace Braveheart Sword is inspired by the sword used in the film Braveheart.

It is forged from high carbon steel and features a broad blade topped with solid brass hilt fittings and a brown suede ricasso and grip. This sword features a blunt blade and is designed for display only. 

Total length: 136cm
Blade length: 97.5cm
Grip length: 28.6cm
Weight: 2.1kg
Blade width (base): 4.3cm
Point of Balance (PoB): 14cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Sir William Wallace was a Scottish knight and one of the main leaders in the Wars of Scottish Independence.  In September 1297 he defeated the English army at the Battle of Stirling Bridge. After the battle he was appointed Guardian of Scotland and served until he was defeated at the Battle of Falkirk in 1298. He continued to fight for Scottish independence until he was captured in 1305 executed in London for crimes of High Treason.  In death his exploits passed into legend. Sir Walter Scott wrote about him in “Exploits and Death of William Wallace – the “Hero of Scotland”.

Our Squire’s William Wallace Braveheart Sword is inspired by the sword used in the film Braveheart. It is manufactured in the world famous Art Gladius factory in Toledo, Spain. The stainless steel blade is topped by a steel guard and pommel and features a stained wood grip. This sword features a blunt blade and is designed for display only.

Total length: 107.5 cm
Blade length: 82.5 cm
Grip length:  17.5 cm
Weight: 1272 g
Blade thickness (base):  0.3 cm
Blade width (base): 3.7 cm
Point of Balance (PoB):  9 cm
Blade: Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

DAMAGE: Mark on the guard & rusty pommel. 
Quantity: 1

This iconic sword was wielded by the immortal Kurgan in the cult 80’s movie Highlander. He is first seen wielding it in his battle against the Clan Macleod in 1536 where he wounds Connor Macleod and almost takes his head. The Kurgan also wields this sword when he defeats and beheads Connor’s mentor Ramirez. The last time this sword is seen is during his final epic battle with Connor Macleod.

This item is now out of license but made to the same exact specifications as the original licensed product. Our Kurgan Sword is a product of the famous Marto sword factory in Toledo, Spain. It features cast metal hilt parts with retractable blade spikes and a leather-wrapped grip. The massive 420 stainless steel blade has a mirror polished finish.

Length: 125cm
Blade Length: 97cm
Weight: 3kg

All dimensions are approximate and may vary from piece to piece.

Buy the Highlander - Kurgan Sword with confidence from the UK’s leading movie sword retailer.

This iconic sword was wielded by the immortal Kurgan in the cult 80’s movie Highlander. He is first seen wielding it in his battle against the Clan Macleod in 1536 where he wounds Connor Macleod and almost takes his head. The Kurgan also wields this sword when he defeats and beheads Connor’s mentor Ramirez. The last time this sword is seen is during his final epic battle with Connor Macleod.

This item is now out of license but made to the same exact specifications as the original licensed product. Our Kurgan Sword is a product of the famous Marto sword factory in Toledo, Spain. It features cast metal hilt parts with retractable blade spikes and a leather-wrapped grip. The massive 420 stainless steel blade has a mirror polished finish.

Length: 125cm
Blade Length: 97cm
Weight: 3kg

All dimensions are approximate and may vary from piece to piece

Buy the Highlander - Kurgan Sword with confidence from the UK’s leading movie sword retailer.

The Clan Macleod Family Sword was wielded by the immortal Connor Macleod in the cult 80’s movie Highlander. He used it from the time of his first battle with the Kurgan and Clan Fraser in 1536 up until the death of his wife in 1590 where it was used as a grave marker. He returns in 1995 to retrieve the sword after his katana is broken by the immortal Kane. The sword is still in place although worn by the ravages of time.

This item is now out of license but made to the same exact specifications as the original licensed product. It features a steel hilt with “Macleod” emblazoned across the guard and a brown suede wrapped handle. The broad blade is constructed from stainless steel for a maintenance free finish and features blunt edges for safety.

Length: 110cm
Blade Length: 83cm
Weight: 2kg
Blade: AISI 440 Stainless Steel
Edge: Blunt
Pommel: Threaded
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

This iconic Dragon Katana was wielded by Duncan Macleod in the Highlander series and movie Highlander: Endgame. Duncan was given the katana by his mentor Hideo Koto whilst training in Japan. Hideo had been ordered to commit ritual suicide by the shogun for harbouring a foreigner and give the sword to Duncan shortly before his death.  

This item is now out of license but made to the same exact specifications as the original licensed product. It features an impressively detailed faux ivory dragon-head handle, 420 stainless steel blade and red lacquered scabbard.

Length: 104cm
Blade Length: 70cm
Weight: 1.5kg
Blade: 420 Stainless Steel
Edge: Sharp
Scabbard: Lacquered Wood

All dimensions are approximate and may vary from piece to piece.