Deepeeka Swords

The Roman Gladius was the primary weapon of the Roman Legionary and was used in conjunction with the 'Scutum' (shield) and 'Pilum' (spear). Its design was strongly influenced by the swords used by the Iberian (Spanish) Celts. It was predominantly designed as a thrusting weapon and was in use in one form or another from the 4th Century BC to the 3rd Century AD.

The Pompeii Gladius takes its name from the archaeological site in Italy where, during excavations, 4 such swords were found. The swords are dated to before 79AD - the year that Pompeii was buried in volcanic ash. The Pompeii Gladius, along with the earlier Mainz Pattern Gladius, would have been issued to the garrison at Hadrian’s Wall. Examples can be seen in H. Russell Robinson’s book "What The Soldiers Wore On Hadrians Wall'".

Our Pompeii Gladius features a turned wood pommel and bone grip. The straight blade is hand forged from steel and in housed in a wooden scabbard with red leather covering and decorated brass fittings. This sword is not designed or recommended for contact reenactment (fighting) but is favoured by living history enthusiasts.

Overall Length: 70cm
Blade Length: 48cm
Width: 4.9cm
Grip Length: 10.8cm
Weight: 1135g
Thickness: 5mm
P.O.B: 11cm
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, Leather, Brass

All dimensions are approximate and may vary from piece to piece.

On one side of the blade is the only known complete inscription of the twenty-eight letter Anglo-Saxon runic alphabet, as well as the name "Beagnoth" in runic letters. It is thought that the runic alphabet had a magical function, and that the name Beagnoth is that of either the owner of the weapon or the smith who forged it.

Although many Anglo-Saxon and Viking swords and knives have inscriptions in the Latin alphabet on their blades, or have runic inscriptions on the hilt or scabbard, the Seax of Beagnoth is one of only a handful of finds with a runic inscription on its blade.

Total length: 73.5cm
Blade length: 55.5cm
Grip length: 18cm
Weight: 906g
Blade width (base): 4.3cm
Blade: EN45 High Carbon Steel
Edge: Blunt
Scabbard: Stitched Leather

All dimensions are approximate and may vary from piece to piece.

Our 5 Lobe Viking Sword is based on a late Viking design from around the 11^th century and is contemporary with the Battle of Stamford Bridge in 1066. A similar sword held in the British Museum collection was reputed to be taken from the tomb of the Earl of Pembroke in Temple Church, but was probably found in the River Thames at Temple Church.

It features a forged and fullered steel blade designed for hacking and slashing and is hilted with a short guard and 5 lobed pommel. The wooden scabbard is wrapped with brown leather to match that of the leather wrapped sword grip. Although this sword has a forged blade it is not tempered and is not suitable for combat. 

Total Length: 96cm
Blade Length: 78cm
Grip Length: 11cm
Weight: 1278g
Blade Thickness (base): 0.46cm
Blade Width (base):  4.45cm
Point of Balance (PoB): 16cm
Blade: EN45 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather

All dimensions are approximate and may vary from piece to piece.

Our 3 Lobe Viking Sword is based on a late Viking design from around the 11^th century and is contemporary with the Battle of Stamford Bridge in 1066. A similar sword was found on Canwick Common in Norfolk and is now held in the British Museum collection.

It features a forged and fullered steel blade designed for hacking and slashing and is hilted with a short guard and 3 lobed pommel. The wooden scabbard is wrapped with brown leather to match that of the leather wrapped sword grip. Although this sword has a forged blade it is not tempered and is not suitable for combat. 

Total Length: 95cm
Blade Length: 79cm
Grip Length: 10.5cm
Weight: 1352g
Blade Thickness (base): 0.6cm
Blade Width (base):  4.4cm
Point of Balance (PoB): 17cm
Blade: EN45 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather

All dimensions are approximate and may vary from piece to piece.

Sir William Marshal was one of England's most famous knights and described by the Archbishop of Canterbury as the "best knight that ever lived". He served 4 kings including Richard the Lionheart and was one of the most powerful men in Europe. By the time of his death in 1219 he was referred to throughout Europe as "The Marshal". 

The Sir William Marshal Sword is inspired by the one that he is holding in his tomb effigy at Temple Church, London. It features a hand-forged high carbon steel blade, steel pommel and guard, and a waisted leather grip. It comes complete with a well made leather and wood scabbard with brass belt loops (for attaching to a sword belt). This item has a blunt blade and is manufactured for display only.

Total Length: 95cm
Blade Length: 78.5cm
Grip Length: 11.5cm
Weight: 1130g
Blade Thickness (base): 0.5cm
Blade Width (base):  4.4cm
Point of Balance (PoB): 14cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood

All dimensions are approximate and may vary from piece to piece.

The Knightly Sword is the perfect accompaniment for any costume, whether it be for film, theatre or fancy dress. The non-sharp steel blade is polished and lightly oiled for protection. The guard and pommel are crafted from steel and are separated by a leather covered wood grip. The well-made scabbard is hand crafted from wood and leather.

Although this sword is constructed from high carbon steel and has a full tang, we would not recommend it for use as the blade has not been heat-treated.

Total Length: 95cm
Blade Length: 78cm
Grip Length: 11cm
Weight: 1200g
Blade Thickness (base): 0.5cm
Blade Width (base):  4.4cm
Point of Balance (PoB): 14cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood

All dimensions are approximate and may vary from piece to piece.

The Robert the Bruce Sword features a forged steel blade with solid brass pommel and guard. The pommel features the rampant lion of the Bruce coat of arms whilst the guard is decorated with crusader crosses, both in red enamel. The leather and wood scabbard is decorated with a “Z” pattern and has brass scabbard loops.

This sword is blunt and designed for display only.

Total Length: 97cm
Blade Length: 78.5cm
Grip Length: 12.5cm
Weight: 1140g
Blade Thickness (base): 0.44cm
Blade Width (base):  4.5cm
Point of Balance (PoB): 13.5cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood

All dimensions are approximate and may vary from piece to piece.

The Knights Templar Sword is the most popular sword in our collection. If you do not have the space for a full-size sword why not consider purchasing the matching Knights Templar Dagger instead.

The sword features a forged steel blade with solid brass pommel and guard - both adorned with the Templar Cross in red enamel. Comes complete with leather scabbard with and baldric shoulder belt. This item has a blunt blade and is manufactured for display only.

Total Length: 92.5cm
Blade Length: 74.5cm
Grip Length: 12.5cm
Blade Thickness (base): 0.49cm
Blade Width (base): 4.5cm
Weight: 1046g
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

Our Crusader Knight’s Sword is perfect for knights from any of the Crusader Orders. This 14^th century arming sword has a light and well balanced and perfect for use with a shield. It features a hand forged blade, steel fittings and a leather-wrapped grip. The well-made leather scabbard is decorated with an embossed shield featuring a crusader cross (which can be painted to reflect a particular crusading order).

The Crusader Knight’s Sword has a blunt blade and is designed for display only. It is not suitable for contact re-enactment. 

Overall Length: 94cm
Blade Length: 77cm
Blade Width: 5cm
Blade Thickness: 0.7cm
Guard Width: 19.5cm
Guard Depth: 2cm
Grip: 10cm
Weight: 1150g
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood

All dimensions are approximate and may vary from piece to piece.