Pirate

Dominus Gladius offer a wide range of training tools for the Historical European Martial Artist. Their collection focusses on the weaponry used in the Ancient Roman, Viking and Medieval periods.

Their products are either made of durable nylon (stiffer training weapons) or a softer and more forgiving polyurethane rubber (for sparring). Adequate protection must be used when sparring with these weapons.

Total Length: 98cm
Blade Length: 80.5cm
Handle Length: 14.5cm
Total Width: 12.2cm
Blade Width: 3.6cm
Weight: 450g
Material: Polypropylene

All dimensions are approximate and may vary from piece to piece.

As the name suggests, the Saber Big is big enough to accommodate even larger gloves whilst providing the full protection a cuphilt or a basket hilt on a saber can offer. All the hilt parts of SIGI Saber Big are heat treated and the saber will survive lots of abuse. The handle is designed for the most comfortable grip. The back of the handle has anti-slip support for a firmer grip (or a thumb grip if you prefer it).

Total Length: 100cm
Blade Length: 86cm
Blade Width: 2.4cm
Cuphilt Width: 10cm
Cuphilt Depth: 7.5cm
Grip Length: 14cm
P.O.B: 12-13.5 cm
Flexibility: 7-8.5 kg
Tip: Spatulated

All dimensions are approxiimate and may vary from piece to piece.

Battlecry has added every swashbuckler’s and pirate’s favorite sword to its line: the Cutlass. The Cutlass was prized for its compact length, which was more suitable for the tight confines of a ship. This Battlecry Cutlass would do any seafarer proud, with a slightly upswept blade that has a clip point tip that’s perfect for thrusting.

The basket is attractively decorated with cut-outs. Top-quality, genuine leather scabbard with metal throat and chape. Scabbard includes attached frog and belt loop. The 1065 high carbon steel has a darkened, battle-hardened finish, so it’s well protected from the frequent rust spots and stains that occur so often from everyday practice and exposure to the elements.

The blade has a full tang and is tempered to a low 50s RC. This pre-sharpened blade has gone through rigorous testing. The hands-on nature of the manufacturing by master smiths makes this line unique.

Includes a certificate of authenticity signed by each smith that touched your blade through every step of the forging process. Also includes "Battlecry" sticker.

Total Length: 74cm
Blade Length: 62cm
Blade Width: 3.2cm
POB: 14.6cm from guard
Blade: 1065 High Carbon Steel 
Edge: Sharp 
Weight: 907g

All dimensions are approximate and may vary from piece to piece.

Starting in 1860, US Navy M1860 cutlasses were manufactured for the US Navy in Chicopee, MA. They continued to be used after the Civil War broke out. Our replica has the marks you would expect to see on an original: "USN DR 1862" and "AMESMFGCO CHICOPEE MASS" to show that the cutlass is military issue and who manufactured it.

Heavily influenced by the sabre used by the French navy, our US Navy Cutlass M1860 is a replica of the model that replaced the M1841. The slightly curved blade has a wide fuller that ends in the area of the point where the broad backstops and the false edge begins. The blade geometry of the M1860 makes it extraordinarily light. Held in place by a riveted pommel and the full knuckle bow at the hand guard, the wooden grip of this naval cutlass is covered in leather and wrapped with twisted, golden wire. It includes a leather scabbard with a frog for holding the scabbard.

Total Length: 80cm
Blade Length: 65.5cm
Grip Length: 11cm
Weight: 0.86kg
Blade Thickness (base): 4.3mm
Blade Width (base): 3.1cm
Point of Balance (PoB): 11cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

This sword is very popular with people studying cutlass drills and was carried by most of the French Infantry throughout the Napoleonic Wars. It is also very popular for opening champagne bottles!

The polished blade has been forged from EN9 steel and has been well tempered.

Total Length: 74cm
Blade Length: 60cm
Grip Length: 10cm
Weight: 1.012kg
Blade Thickness (base): 7.2mm 
Blade Width (base): 3.4cm
Point of Balance (PoB): 11cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

Up until 1805 the Royal Navy did not have a regulation pattern sword. The sword that was introduced was modelled on the 1803 pattern infantry sabre that was previously carried by Navy and Marine officers. The 1805 pattern sword was used by Lord Horatio Nelson and he was no doubt armed with it at his most famous battle, The Battle of Trafalgar.

After he was killed at the battle his sword was returned to England and is now on display in the Nelson Museum, Great Yarmouth, England. This sword was in constant use until it was replaced in 1827 by a newer model.

The polished blade has been forged from AISI 1065 High Carbon Steel and has been well tempered.

Total Length: 95cm
Blade Length: 83cm
Grip Length: 10cm
Weight: 905g
Blade Thickness (base): 7.8mm
Blade Thickness (CoP): 5.3mm
Blade Width (base): 2.6cm
Blade Width (CoP): 2.2cm
Point of Balance (PoB): 18cm
Centre of Percussion (CoP): 25cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

This pattern of sword was introduced during the Napoleonic Wars and saw service at the famous Battle of Trafalgar. Previous cutlasses shared a similar figure 8 hilt design but featured horn or leather grips that deteriorated quickly when exposed to seawater and changes in temperature.

The introduction of an iron grip greatly extended the serviceable life of this sword. The hilts were traditionally painted or japanned to stop them from rusting. The blade has been forged from AISI 1065 High Carbon Steel and has been well-tempered. It is housed in a black hardened buff leather scabbard.

Total Length: 89cm
Blade Length: 74.5cm
Grip Length: 12cm
Weight: 1.458kg
Blade Thickness (base): 6.3mm
Blade Width (base): 3.6cm
Point of Balance (PoB): 15cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Leather, Brass

All dimensions are approximate and may vary from piece to piece.

This sword was first introduced to the Royal Navy in 1827 and has been standard issue throughout a multitude of conflicts since. It is still the regulation pattern sword to this day.

This version features a pipe-backed blade that went out of regulation in 1846. Its design was adopted and is carried today by countries within the Commonwealth such as the Canadian and Royal Australian Navy. The polished blade has been forged from AISI 1065 High Carbon Steel and has been well tempered.

Total Length: 93.5cm
Blade Length: 80cm
Grip Length: 9.5cm
Weight: 0.814kg
Blade Thickness (base): 5.1mm 
Blade Width (base): 2.9cm
Point of Balance (PoB): 16cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

Please note: This item is a historical replica and not current issue to the Royal Navy

This iconic sword was first introduced to Royal Navy in 1827 and has been in service throughout a whole host of conflicts right up until today. It was adopted by all of the Commonwealth Navies in the British Empire and is still carried today as a dress sword.

The brass hilt features a lion-head pommel, adopted from the earlier 1805 pattern swords of Nelson’s navy, an imitation ray-skin grip wrapped with brass wire and a crown and fouled anchor motif on the guard. It features a hinged latch to allow it to be attached to the scabbard, a requisite for a naval officer’s side arm, especially when on-board during a gale! The AISI 1065 high carbon steel blade is tempered and decorated with etchings. One side features the Crown and Fouled Anchor of the Royal Navy, the other side featuring the Royal Coat of Arms. The scabbard is black leather and features decorated brass fittings and 2 suspension rings.

Total Length: 94cm
Blade Length: 80cm
Grip Length: 10cm
Weight: 907g
Blade Thickness (base): 0.76cm
Blade Width (base): 2.7cm
Point of Balance (PoB): 18cm
Blade: AISI 1065 High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: Brass, Leather

All dimensions are approximate and may vary from piece to piece.