Re-enactment

A weapon unequalled in elegance and grace: the classic French rapier. The slender, double-edged blade determines the character of this classic rapier, whose ricasso elegantly becomes narrower inside the basket. But the complex basket with its sweeping finger guard is not the only special feature this classic rapier has to offer: the grip is bordered by braided steel wire on both sides.

The grip itself is made of horn wrapped with golden wire for a stunning effect. When used with a French parrying dagger, this classic rapier forms part of a deadly set that was especially appreciated by duellists. Our classic French rapier comes with its own scabbard.

Total Length: 116cm
Blade Length: 99cm
Grip Length: 8cm
Weight: 1.14kg
Blade Thickness (base, outside basket): 4.7mm
Blade Thickness (CoP): 3.1mm
Blade Width (base, outside basket): 2cm
Blade Width (CoP): 1.4cm
Point of Balance (PoB): 6cm
Centre of Percussion (CoP): 20cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

This stunning rapier has an expertly crafted swept & twisted metal basket. The heavily carved horn grip mimics the elegantly twisted metal of the hilt and is hand wound and inset with a single steel accent wire that provides an excellent grip while duelling.

Better yet was the aristocratic, dashing look it gave the wearer while rakishly hanging from the belt. Hand forged high carbon steel blade with flattened oval cross section. Extended, custom engraved ricasso for strength.

Includes leather scabbard with twisted metal accents completing this magnificent and fast rapier.

Total Length: 112cm
Blade Length: 95cm
Blade Width: 2cm
Blade Thickness: 0.5cm
Weight: 1247g
Grip Length: 9cm
Material: 1065 High Carbon Steel
Edge: Blunt
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

Our Munich Town Watch Rapier has a relatively wide blade, which makes it ideal for both functions. It is a replica of a rapier type found in many museums today: in the Munich Armory, the Bavarian Army Museum in Ingolstadt, Germany or catalogue number A612 in the Wallace Collection, for example.

Made around 1600, this rapier has a strong, tapering blade hand forged from carbon steel with a narrow ricasso inside the finger ring. Its elegant complex basket has side guard rings and a knuckle bow. The hardwood grip is elaborately wrapped with iron wire with braided wire at the ends. A riveted pommel shaped like a flattened ball completes the hilt.

This Munich Town Watch Rapier includes a black leather scabbard with a mount and chape.

Total Length: 100.5cm
Blade Length: 83.5cm
Grip Length: 8.5cm
Weight: 1.56kg
Blade Thickness (base): 3.7mm
Blade Thickness (CoP): 3.7mm
Blade Width (base): 4.2cm
Blade Width (CoP): 2.7cm
Point of Balance (PoB): 6cm
Centre of Percussion (CoP): 31.5cm
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

A rapier of this identical form and proportions is currently housed in The Royal Armouries (formerly the Tower of London).

The flamboyantly formed hilt is both beautiful and functional. It’s forward plates are pierced and show lavish birds among foliage, while the bars of the guard are slender both defending the hand and having an upward loop to catch an opponent’s blade. The heavy pommel allows for a more balanced feel for fighting. The blade is etched on both sides of the ricasso with the Latin phrase CHRISTUS IMPERAT which means “Christ Commands.”

Total Length: 119cm
Blade Length: 103cm
Blade Width: 2.5cm
Blade Thickness: 0.48cm
Weight: 1361g
Grip Length: 8.9cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

The Sinclair Sabre is a type of cutlass also known as a Dusägge (or Dusack). It was named after George Sinclair, a mercenary captain from Scotland whose men frequently carried these swords.

In 1612 he was transported by the pirate captain Robert Stewart to fight the Danes but ambushed and killed when leading his men against Norwegian militia.

Total Length: 80cm
Blade Length: 64cm
Grip Length: 10cm
Weight: 1594g
Blade Thickness (base): 10mm
Blade Width (base): 4.5cm
Point of Balance (PoB): 7cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Nut
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

The pouch is HANDCRAFTED from 1.2-1.4 mm GENUINE BUFF SUEDE LEATHER with a harder 3-3.3 mm thick BUFF LEATHER CORE (about 11.5 cm wide), riveted to the pouch using brass rivets.

NOTE: Since this is authentic leather, make sure to keep it away from moisture; clean it regularly with linen (or any soft cloth); if the stain pertains, damp cloth and some lather out of mild soap will do the job.

You have to carry your herbs for the next adventure, but your medieval clothes are short of pockets! Our leather belt pouch is just what fits right.

Width: 15cm
Height: 13cm
Depth: 12.7cm

All dimensions are approximate and may vary from piece to piece.

Our Medieval Dagger Frog is designed to fit most belts from different historical periods. It is handcrafted of durable, full grain leather with nickel plated metal studs. A jaunty, but secure carrier for your dagger or dirk.

Height: 22cm 
Width: 14cm 
Depth: 3cm 
Weight: 64g

All dimensions are approximate and may vary from piece to piece.

Buy the Medieval Dagger Frog – Black with confidence from the UK’s leading historical clothing retailer.

This beautiful Centurion gladius has a hand forged and tempered high carbon steel blade; it is truly worthy of a Roman officer.

All antiqued parts are meticulously hand finished of solid wood with metal accents to complete this regal piece. Features a baldric with a custom wood scabbard wrapped in leather and accented with real metal detail.

Overall Length: 71cm
Blade Length: 50cm
Blade Thickness: 0.5cm
Weight: 765g
Grip Length: 11.5cm
Material: 1065 High Carbon Steel
Edge: Blunt/Sharpenable
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

This sword ("gladius" in Latin) was found in Pompeii, Italy and has a straight, double-edged blade. It was as effective for cuts as it was for thrusts, which means it was the perfect sword for close combat.

The entire hilt, including the grip, is made of selected hardwood: ash and maple, to be precise. The guard prevents your hand from slipping down the blade after a strong thrust. The ample, ball-shaped pommel keeps your hand on the grip after strong cuts. A scabbard with ornamental brass applications comes with this Pompeii type gladius.

Total Length: 69cm
Blade Length: 51cm 
Grip Length: 8.5cm 
Weight: 0.77kg 
Blade Thickness (base): 4.2mm 
Blade Width (base): 5.3cm 
Point of Balance (PoB): 10cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, Leather, Brass

All dimensions are approximate and may vary from piece to piece.