Windlass Steelcrafts

LIMITED STOCK!

Sometimes the Windlass Steelcrafts factory make “extras” in their factory runs in case of any quality control issues. They also occasionally have some stock left over when orders are cancelled, reduced or become end of line. These products find their way to retailers in small numbers at quite heavily discounted prices. Rest assured, these products all feature forged and tempered Windlass blades with quality fittings, they are just discounted to clear. When they’re gone, they’re gone – so be quick!

This impressive knife is a heavy dagger with a pointed simple blade. The Toothpick and Bowie Knife have lent their names to the state of Arkansas, which is known as "The Toothpick State" and "The Bowie State."

This dagger has a tapered, high carbon steel blade. Wood grip and leather-wrapped scabbard.

Total Length: 47cm
Blade Length: 35cm
Blade Width: 4cm
Weight: 400g
Blade: Fully Tempered Carbon Steel
Edge: Blunt - Sharpanable
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

LIMITED STOCK!

Sometimes the Windlass Steelcrafts factory make “extras” in their factory runs in case of any quality control issues. They also occasionally have some stock left over when orders are cancelled, reduced or become end of line. These products find their way to retailers in small numbers at quite heavily discounted prices. Rest assured, these products all feature forged and tempered Windlass blades with quality fittings, they are just discounted to clear. When they’re gone, they’re gone – so be quick!

This dagger has a tapered, high carbon steel blade. Wood grip, leather-wrapped and leather scabbard.

Total Length: 49cm
Blade Length: 33cm
Blade Width: 4cm
Weight: 400g
Blade: Fully Tempered Carbon Steel
Edge: Blunt - Sharpanable
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

Any medieval Crusader would have considered themselves blessed to carry this magnificent high carbon steel sword. Expertly decorated with pierced crosses on the blade, an engraving on the guard and the pommel has been inset with a coin. Matching scabbard and belt also included.

Total Length: 104cm
Blade Length: 84cm
Blade Width: 5cm
Guard Width: 22cm
Weight: 1.5kg
Material: High Carbon Steel

All dimensions are approximate and may vary from piece to peice.

Our Confederate saber would have been primarily used by soldiers riding for famous generals like Jeb Stuart, Wade Hampton and Nathan Bedford Forrest. They taught the Yankees the meaning of fear. This Confederate saber is lightweight (approx. 1 kg) and manageable. The back is relatively broad up to the center of percussion (CoP), which makes the blade extremely stable. And the fuller, which also stops at the CoP, is responsible for the reduced weight and resulting manageability.

The blade curves more acutely as it nears the point, which magnifies the saber's cutting power. An accurate reproduction of a historical weapon (s. William Albaugh, "Confederate Edged Weapons", p. 137), the hand guard, the pommel, and even the wire wrapped around the brown leather that covers the grip are made of brass.

Total Length: 100.5cm
Blade Length: 86cm
Grip Length: 10.5cm
Weight: 1.02kg
Blade Thickness (base): 4.6mm
Blade Thickness (CoP): 3.9mm
Blade Width (base): 3cm
Blade Width (base): 2.5cm
Point of Balance (PoB): 19cm
Centre of Percussion (CoP): 21cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Steel, Brass

All dimensions are approximate and may vary from piece to piece.

Dated to around 1775, the prototype for this handsome sabre is pictured in "Swords & Blades of the American Revolution," a book by George C. Neumann that is very popular with collectors and sword fans. The single-edged, subtly curved blade has two fullers. A narrow, deep fuller almost runs along the entire length of the blade. The other one is shorter, shallower, and much wider. Because of them, this amazing saber weighs less than one kilogram.

Nevertheless, our American Revolutionary War sabre is perfectly balanced for delivering mighty cuts: like most powerful cutting weapons, it is slightly top-heavy. The spiraling wooden grip is comfortable and easy to control, and the knuckle bow provides added hand protection.

Total Length: 100.5cm
Blade Length: 86cm
Grip Length: 10cm 
Weight: 0.95kg 
Blade Thickness (base): 4.7mm 
Blade Width (base): 3.3cm 
Point of Balance (PoB): 19cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

The Spartans developed a short sword that is extraordinarily effective in close combat. The leaf-shaped, double-edged blade has an acute point and is well balanced due to the combination of the short, downward curving crossguard and bronze grip.

Our Spartan short sword dates from around 500 BC and includes a leather-covered scabbard made of wood. The metal band has rings so you can attach the sword and scabbard to a belt. This Spartan sword is based on the one illustrated in "The Spartan Army," a book by Nicholas Sekunda with illustrations by Richard Hook.

Total Length: 50cm
Blade Length: 36cm
Grip Length: 10cm
Guard Width: 8.5cm
Blade Thickness (base): 0.46cm
Blade Width (base): 5cm
Weight: 930g
Blade: High Carbon Steel 
Edge: Blunt
Pommel: Threaded
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

Buy the Spartan Lakonia Short Sword with confidence from the UK’s leading Greek sword retailer.

Our classic Hoplite sword is a historically correct replica of this widespread battlefield weapon: it has the pointed blade shape of the blade, the classic knob and a simple but effective guard pole made of steel.

The handle is covered with leather, which is perfectly complemented by the supplied wooden sheath, which is also covered with leather and is covered with brass.

Total Length: 71.5cm
Blade Length: 55cm
Grip Length: 10.5cm
Weight: 1.01kg
Blade Thickness (base): 5mm
Blade Thickness (CoP): 4.5mm
Blade Width (base): 5.5cm
Blade Width (CoP): 5.2cm
Point of Balance (PoB): 8.5cm
Centre of Percussion (CoP): 22cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.

The dirk used during the Scottish Renaissance is an advanced development of the kidney dagger and emerged in this form toward the end of the 16th century. Our classic Scottish dirk has a single-edged blade with a fuller offset toward the back edge. Turned to fit most hands very well, the grip is made of hardwood and the decorated, riveted pommel is made of steel.

The scabbard, on the other hand, is made of leather. Its mount and chape are made of metal, and it also has a device for attaching the whole ensemble (dirk and scabbard) comfortably to a belt.

Total length: 49.5 cm
Blade length: 35.5 cm
Grip length: 11.5 cm
Weight: 300 g
Blade thickness (base): 0.46 cm
Blade width (base): 3.3 cm
Edge: Blunt
Scabbard: Wood, Leather, Steel

All dimensions are approximate and may vary from piece to piece

Buy the Classic Scottish Dirk with confidence from the UK’s leading Scottish Dirk retailer.

A high‑carbon steel sword inspired by the legendary Norse weapon Gram, featuring dragon motifs, rune etchings, wet‑wrap leather grip, and embossed scabbard.

Total Length: 96.5cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Weight: 1.2kg
Blade Material: 1075 High Carbon Steel
Grip: Leather wet‑wrap
Scabbard: Leather‑lined wood with belt

All dimensions are approximate and may vary from piece to piece.