Windlass Steelcrafts

If King Arthur actually existed many historians place him as a war leader seeking to halt the invasion of the Saxons after the fall of Rome. There are many indications that England did, after a time of much strife, have a brief period of peace and prosperity in what is now called the "Dark Ages".

This sword is of a type that was widely in use during this period and would be what a hard-fighting warrior would prefer. Nicely balanced, well-tempered high carbon steel blade offset with antiqued brass parts.

Total Length: 94.5cm
Blade Length: 79cm
Grip Length: 10cm
Weight: 1280g
Blade Thickness (base): 4.7mm
Blade Thickness (CoP): 4mm
Blade Width (base): 4.2cm
Blade Width (CoP): 3.9cm
Point of Balance (PoB): 13cm
Centre of Percussion (CoP): 22cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood

All measurements are approximate and will vary from piece to piece.

On July 29, 1030, Christian King Olaf and his men faced the mighty army of their heathen opponents – which was double the size – on the battlefield at Stiklestad in Norway (90 km north of Trondheim). Olaf fell, but his army was victorious. The Christianization of Norway could begin!

The wonderful Viking sword now called Sticklestad was the type used at this famous battle. It was as effective for cuts as it was for thrusts, which means it was the perfect sword for close combat. The wide fuller on both sides makes this edged weapon lightweight. The sword handles like an extension of your arm. The wooden grip is wrapped in suede for better manageability and it comes with a handsome, matching scabbard. The copper-filled pattern on the crossguard and five-lobed pommel give the hilt of our Sticklestad Viking sword a squat, powerful look.

Total Length: 94cm
Blade Length: 78.5cm
Grip Length: 10cm
Weight: 0.9kg
Blade Thickness (base): 2.9mm
Blade Thickness (CoP): 2.7mm
Blade Width (base): 4.7cm
Blade Width (CoP): 3.5cm
Point of Balance (PoB): 13cm
Centre of Percussion (CoP): 21cm
Wheeler-Oakeshott type: VI
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather, Steel

All dimensions are approximate and may vary from piece to piece. 

The Greeks or Etruscans were probably the first to use a falcata, but they were also popular with the tribes that lived on the Iberian peninsula. The unusual shape of our Hispanic falcata makes it ideal for delivering serious cuts, which is why the Romans feared the weapon.

The single-edged blade is curved inward, has two fullers that meet in the middle and echo the shape of the blade, and a wide back. The engraving on the distinctive grip depicts a primitive bird of prey. This falcata includes a scabbard.

Total Length: 64cm
Blade Length: 50.5cm
Grip Length: 12.5cm
Weight: 1340g
Blade Thickness (base): 0.49cm
Blade Width (base): 7cm
Point of Balance (PoB): 10cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

A transition from the Viking sword to the classic medieval sword, our medieval sword is probably Oakeshott type X. Swords like this one were very popular for centuries.

The double-edged, hardly tapered blade has a long, relatively wide fuller which makes it balance very well. The curved, flared crossguard provides lots of protection for your hand. Thanks to its leather covering, the grip is comfortable to grasp. The wheel pommel is riveted. Our classic medieval sword comes with a scabbard.

Total Length: 100cm
Blade Length: 83.5cm
Grip Length: 10cm
Weight: 1.42kg
Blade Thickness (base): 4.1mm
Blade Thickness (CoP): 3.6mm
Blade Width (base): 5.1cm
Blade Width (CoP): 3.8cm
Point of Balance (PoB): 15cm
Centre of Percussion (CoP): 20cm
Oakeshott type: X
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

This sword from Windlass Steelcrafts is a precise replica of the iconic sword of Henry V. Like the original, it’s a relatively short weapon, designed for fast cutting and thrusting. The blade is slightly hollow ground and the edge is sharpened at the factory. It’s beautifully balanced and feels lively in the hand. The pommel is hollow like the original and is appropriately gold plated in the recesses, and has red enamel crosses emblazoned on each side (we used enamel instead of paint for the sake of durability).

An accurate, fully functional replica of a true battle sword once used by the king of England. A design with just enough flair for a sense of elegance, but no doubt a pragmatic, effective cutting weapon. Includes top-grain leather scabbard and belt.

Total Length: 86cm
Blade Length: 68cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Weight: 1.2kg
Material: 1065 High Carbon Steel
Edge: Sharp
Scabbard: Leather

All dimensions are approximate and may vary from piece to piece.

Here's a gorgeous set of "belt tools" inspired by Norse mythology, attractively stored in an "Asgard Creations" gift/display box.

The axe is wrapped in leather and faux fur. The hardwood handle is replete with nordic runes: Raido (journey), Fehu (wealth), Wunjo (joy), Ehwaz (movement), Naudiz (need), Eihwaz (defense), Teiwaz (warrior), Othila (separate), and Thuisaz (giant). The high carbon steel head is forged from 1055 carbon steel and struck with additional Viking symbols and is thick enough for serious chopping and has a sharp edge.

The knife features a raven head pommel, the guard, and the pommel have a rough-forged finish that looks fresh out of the dwarves' smithy. The carbon steel blade comes sharpened and is easy to resharpen after you've used it for a while. The spine of the blade makes this knife suitable for mild chopping as well as precise cutting. This is a medium-sized knife with a generous handle. The grip is high-quality leather wrapped around a full tang and the raised laces do a superb job of providing a secure grasp in wet situations. Includes leather belt sheath. 

The rustic wooden box has leather straps to secure the axe and knife for carrying.

Axe Length: 38cm
Knife Length: 29cm
Total Weight: 3.2kg

All dimensions are approximate and may vary from piece to piece.

The flamboyantly dressed German Landsknecht mercenary lived a harsh, brutal life and was famous for their giant, two-hand Flamberge sword. After using the Flamberge to break an enemy's row of front-line pikemen, a smaller, one-hand sword was employed for the ensuing close-quarters combat - the Katzbalger. 

Carried by all Landsknecht troops, including the pikemen and arquebusiers, this sword had an ornate "closed s" shaped guard and an extra long, fluted pommel. The Katzbalger was most assuredly respectful of its Renaissance roots.

Our replica is just as battle ready as the originals. The beautifully rendered grip would do any Landskecht proud. The fluting in the pommel extends seamlessly into the wood grip, and the guard is expertly spiral-twisted and terminates in half-spheres. The tempered, high-carbon steel blade is adorned with a trio of fullers that slightly lighten the blade.

The black leather scabbard is mildly decorated with leather bands that criss-cross and are knotted near the throat and has a unique steel tip. 

Total Length: 90cm
Blade Length: 74cm
Grip Length: 9cm
Weight: 1.2kg
Blade Width: 3.3cm
Blade: 1075 High Carbon Steel
Edge: Blunt
Scabbard: Leather & Steel Tip

All dimensions are approximate and may vary from piece to piece.

The axe was a formidable sidearm of the medieval knight, especially during the crusades. This stout weapon features a large, expertly sharpened blade, which is pierced with a large cross. The blade has been riveted to the hardwood shaft and has langets for extra support. The grip has been smoothed and wrapped with smooth black leather. All metal parts have been blackened, including the hanging rings at the bottom.

Made by the master smiths of Windlass Steelcrafts. Comes complete with a leather axe head cover.

Total length: 76 cm
Head length: 24.3 cm
Weight: 1452 g

All dimensions are approximate and may vary from piece to piece.

In the pantheon of Norse deities, Baldur was the son of Odin and Frigg (thus a sibling to Thor and Loki) and as such, was destined to reign after Odin. Baldur is known as a figure who bestows joy to all those who share his company. Old Norse poetry relates the death of Baldur as a tragedy and a harbinger of Ragnarok.

In honor of lesser-known siblings everywhere, we've designed this classic Viking sword as a tribute to the fairest member of Asgard. The leather grip of this sword is laser engraved with the three runes that we feel most befit the Norse God. Some scholars believe the name Baldur translates to "bold" so the rune of courage has been added. In her attempt to save Baldur from harm, Frigg asked all things to swear never to harm him (except mistletoe) so the rune of protection has also been included. Finally, Baldur was also known to always be prepared for battle, so the rune of strength completes the array.

The blade is etched with runes that roughly can be translated as the spelling of "Baldur". The leather sheath (with integral belt) is covered with a layer of black suede that is adorned with top grain lace, throat, and chape. The throat and chape bear a Viking symbol for the sun, as Baldur was known as a shining light to all who knew him.

Total Length: 95cm
Blade Length: 78.8cm
Weight: 957g
Blade Width (base): 7cm
Blade: 1065 High Carbon Steel
Edge: Blunt - Sharpenable
Scabbard: Leather, Wood, Brass

All dimensions are approximate and may vary from piece to piece.