HEMA

The Side Sword was a military sword of the 16th and 17th century Renaissance period that also achieved popularity among civilians, due to its relatively light weight and quickness. It also had an advantage over its contemporary, the rapier, in having the ability to cut efficiently as well as thrust. Based on an original German sword of this type, this sword is well balanced an feels exceptional in the hand. The “swept” hilt affords excellent hand protection and the blade geometry makes for outstanding performance in both the cut and the thrust.

Overall: 104cm
Blade Length: 84cm
Handle Length: 14cm
Weight: 1219g
Point of Balance: 9cm
Thickness at Guard: 5.5mm
Thickness at Tip: 2.5mm
Blade Steel: 5160
Edge: Sharp
Handle Material: Leather
Pommel: Threaded

All dimensions are approximate and may vary from piece to piece.

The latest addition to the Red Dragon Combat range of swords is our Oakeshott XIV Sword. It is a replica of an original that is currently on display in the Metropolitan Museum of Art, New York.

Oakeshott describes it as being “an absolutely outstanding sword, not only because of its condition but by reason of its splendid proportions and great size. It dates from around the first quarter of the 14^th century and is remarkably similar to sword found on the body of Sancho IV el Bravo of Castile in Toledo Cathedral.

Overall Length: 86cm
Blade Length: 68cm
Blade Width: 6.5cm
Blade Thickness: 0.45cm
Guard Width: 22cm
Point of Balance: 6cm
Weight: 1.3kg
Material: High Carbon Steel Blade, Leather Grip
Edge: Blunt
Scabbard: Wood, leather, steel

All dimensions are approximate and may vary from piece to piece.

Another exciting addition to the Red Dragon Combat range of swords is our new Crusader Sword. It is based on a surviving example of a Crusader arming sword from the early part of the 13^th century now on display in the Deutsches Historisches Museum in Berlin.

Overall Length: 103cm
Blade Length: 83cm
Blade Width: 5cm
Blade Thickness: 0.45cm
Guard Width: 22cm
Point of Balance: 12cm
Weight: 1.4kg
Material: High Carbon Steel Blade, Leather Grip
Edge: Blunt
Scabbard: Wood, leather, steel

All dimensions are approximate and may vary from piece to piece.

The term "long sword" designates a sword that is longer than a one handed sword: approximately 37 cm or longer. A long sword was primarily wielded using two hands, but thanks to the comparatively light weight of this classic long sword, one handed techniques are also possible.

Its double-edged blade has three fullers, but the two outer ones only run the length of the ricasso. The ricasso itself is large enough for your second hand to reach over the crossguard with langet to grasp it. This hold significantly increases the pressure behind thrust techniques. The wooden grip is wrapped in leather, and both the pear-shaped pommel and the crossguard are made of steel. Our classic long sword comes with a leather scabbard with a mount and chape.

Total length: 122 cm
Blade length: 96 cm
Grip length: 16 cm
Weight: 1.44 kg
Blade thickness (base): 4.4 mm
Blade thickness (CoP): 3.9 mm
Blade width (base): 4.8 cm
Blade width (CoP): 3.2 cm
Point of Balance (PoB): 14 cm
Centre of Percussion (CoP): 26 cm
Oakeshott type: XIIIa
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood & Steel

All dimensions are approximate and may vary from piece to piece.

A transition from the Viking sword to the classic medieval sword, our medieval sword is probably Oakeshott type X. Swords like this one were very popular for centuries.

The double-edged, hardly tapered blade has a long, relatively wide fuller which makes it balance very well. The curved, flared crossguard provides lots of protection for your hand. Thanks to its leather covering, the grip is comfortable to grasp. The wheel pommel is riveted. Our classic medieval sword comes with a scabbard.

Total length: 100 cm
Blade length: 83.5 cm
Grip length: 10 cm
Weight: 1.42 kg
Blade thickness (base): 4.1 mm
Blade thickness (CoP): 3.6 mm
Blade width (base): 5.1 cm
Blade width (CoP): 3.8 cm
Point of Balance (PoB): 15 cm
Centre of Percussion (CoP): 20 cm
Oakeshott type: X
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Our Red Dragon swords feature high carbon EN42J Spring Steel blades that have been forged and tempered to perform like their historical counterparts. They have a core hardness of 45HRC approx, with an edge hardness of 50HRC approx. The hilts feature authentically styled forged guards and pommels constructed from steel, and wooden grips that are masterfully wrapped in leather cord for an aesthetic yet comfortable finish.

They come complete with leather-wrapped wooden scabbards and authentically styled integrated leather belts.

Overall Length: 114cm
Blade Length: 91cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Guard Width: 19.5cm
Point of Balance: 20cm
Weight: 1220g
Material: High Carbon Steel Blade, Leather Grip
Edge: Blunt/Sharp
Pommel: Peened
Scabbard: Wood, leather, steel

All dimensions are approximate and may vary from piece to piece.

The Knight’s Sword is a great functional sword, with leather wrapped handles and a wood core, thru-peened stainless steel pommel and guard. The 9260 Spring Steel forged blade features a diamond cross section and a mirror polish finish.

This sword comes with a wood core leather wrapped scabbard with stainless steel chape for safe and secure carry.

Overall Length: 84cm
Blade Length: 68cm
Handle Length: 11cm
Guard Width: 11cm
Weight: 1048g
Blade: 9260 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Explicitly crafted to CAS specifications, the Crecy War Sword features a traditional thru-tang, peened pommel handle construction. The forged hollow-ground blade possesses a prominent central ridge that tapers the full length of the 81cm blade providing support for the cutting edge.

The 11cm cord-wrapped leather grip is counterbalanced by the stainless pommel for comfortable single-hand fighting. The stainless arched guard pays homage to the English longbowmen who drew victory in the sites of the English King, Edward III.

The Crecy Sword comes with a leather-wrapped wooden scabbard and stainless chape. 

Overall Length: 97cm
Blade Length: 81cm
Handle Length: 11cm
Weight: 1332g
Blade: 5160 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.