Re-enactment

These latest additions to the Red Dragon Combat Range feature 3mm re-enactment safe edges and rounded tips. The blades are formed from tempered high-carbon steel (HRC Core of approx 48 and Edge 50-52 and fullered to ensure they are swift in the hand. Indeed a lot of time and effort has gone into make these blades as agile as possible whilst retaining a re-enactment safe edge. 

The steel hilt fittings neatly sandwich the leather wrapped wooden grip and are held in place by a traditional peened tang. The leather wrapped wooden scabbard features a protective rain guard and metal chape. If you are part of a re-enactment group we recommend consulting your safety officer for guidance before purchase.

Total Length: 109cm
Blade Length: 86cm
Blade Width: 4.3cm
Blade Thickness: 4.5mm
Guard Width: 20.5cm
Grip Length: 17cm
Point of Balance: 11cm
Weight: 1.25kg
Material: High Carbon Steel Blade, Leather Grip
Edge: Blunt 3mm edge
Scabbard: Wood, leather, steel

All dimensions are approximate and may vary from piece to piece.

By customer request Paul Chen has produced a re-enactment version of our SH2250 Bastard sword. The blade is forged in 5160 high-carbon steel, to minimize burring, and the transverse thickness of the guard has been increased, both to provide adequate strength for re-enactment use and to present a safer profile at the ends of the guard.

Another innovation is the provision of an all-leather scabbard, in contrast with the rigid scabbards normally provided with our Practical swords - this is designed both to provide an extra margin of safety when combatants fall on the scabbard in battle and also to minimze the need for replacement scabbards. The sword is supplied with the grip and scabbard in a neutral-colored leather to allow customization to the owners taste.

Total Length: 126cm
Blade Length: 97cm
Handle Length: 23cm
Weight: 1644g
Blade Edge: 2.5-3mm
Blade Steel: 5160
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

These latest additions to the Red Dragon Combat Range feature 3mm re-enactment safe edges and rounded tips. The blades are formed from tempered high-carbon steel (HRC Core of approx 48 and Edge 50-52) and fullered to ensure they are swift in the hand. Indeed a lot of time and effort has gone into make these blades as agile as possible whilst retaining a re-enactment safe edge.

The steel hilt fittings neatly sandwich the leather wrapped wooden grip and are held in place by a traditional peened tang. The leather wrapped wooden scabbard features a protective rain guard and metal chape. If you are part of a re-enactment group we recommend consulting your safety officer for guidance before purchase.

Total Length: 97.5cm
Blade Length: 75.5cm
Blade Width: 4.3cm
Grip Length: 16cm
Blade Thickness: 4.5mm
Guard Width: 18.5cm
Point of Balance: 11cm
Weight: 1.05kg
Material: High Carbon Steel Blade, Leather Grip
Edge: Blunt 3mm edge
Scabbard: Wood, leather, steel

All dimensions are approximate and may vary from piece to piece.

Our Practical broadswords are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies.

The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds.

Total Length: 92.7cm
Blade Length: 76.2cm
Grip Length: 16.5cm
Weight: 1.105kg
Point of Balance (PoB): 10cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Plastic, Steel

All dimensions are approximate and may vary from piece to piece.

These latest additions to the Red Dragon Combat Range feature 3mm re-enactment safe edges and rounded tips. The blades are formed from tempered high-carbon steel (HRC Core of approx 48 and Edge 50-52) and fullered to ensure they are swift in the hand. Indeed a lot of time and effort has gone into make these blades as agile as possible whilst retaining a re-enactment safe edge.

The steel hilt fittings neatly sandwich the leather wrapped wooden grip and are held in place by a traditional peened tang. The leather wrapped wooden scabbard features a protective rain guard and metal chape. If you are part of a re-enactment group we recommend consulting your safety officer for guidance before purchase.

Total Length: 86.5cm
Blade Length: 71.5cm
Blade Width: 4.5cm
Blade Thickness: 5.5mm
Guard Width: 11cm
Point of Balance: 11cm
Weight: 0.87kg
Material: High Carbon Steel Blade, Leather Grip
Edge: 3mm Blunt
Scabbard: Wood, leather, steel

All dimensions are approximate and may vary from piece to piece.

Our Practical Viking Swords are all based on authentically styled swords in our collection but they are tailored to meet the needs of re-enactment and stage combat. These very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies.

The lobate pommel and down-turned guard are typical of Viking swords of the period, as is the broad blade with its deep, full-length fullers. The sword is well-balanced and, with a weight slightly over 2 lbs, it is very quick.

Total Length: 85cm
Blade Length: 71cm
Weight: 1500g
Blade Thickness (base): 0.5cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Plastic

All dimensions are approximate and may vary from piece to piece.

These axe heads are made specifically for re-enactment and living history use. They are crafted with a thickened edge section that can be blunted down to meet your specific requirements.

Please note the axe head is supplied with a rounded edge that is approximately 1-2mm thick, giving a more realistic impression for those who do not wish to use the axe for stage combat. If the axe is to be used for stage combat or sparring the edge will need to blunted further with a file or grinder to achieve the desired edge thickness. 

Supplied as a head only - wooden shaft NOT supplied with this item.

Length: 15cm
Weight: 226g

All dimensions are approximate and may vary from piece to piece.

Buy the Re-enactment Axe Head with confidence from the UK’s leading Viking weaponry retailer.