Marshal Historical Helmets

The Morion Helmet was popular with the foot soldiers of European armies in the 16th and 17th centuries. It is thought to have originated in Spain and would certainly have been worn by soldiers of the Spanish Armada. This style of helmet is associated with soldiers of the English Civil War where it was commonly known as a "Pikeman's Pot".

They were predominantly worn by the soldiers of Cromwell's New Model Army, along with breastplates and buff coats. Surviving morions from the siege of Colchester Castle in 1648 have been unearthed within its grounds and are now preserved in the castle. Some of the best-preserved morions from the English Civil War can now be seen in the Royal Armouries collection in Leeds.

Suitable for 16th & 17th-century re-enactment, especially English Civil War Pikemen.

Manufactured in 2mm steel, with a 1.6mm brim and plume to the rear.

Perimeter: 63cm

All dimensions are approximate and may vary from piece to piece.

Bascinets were one of the favourite choices of helmet in the 14th century and 15th century. It was probably an evolution of the cabasset used under the helmet by both cavalry and infantry. Some variations of this item were used with coif instead of aventail. This design is based on several artistic representations dating from the first quarter of the 14th century and is common in the Spanish peninsula.

Its pyramidal grill system in the visor offers an excellent defence as well as an optimal vision. The visor is foldable and has a pin system that allows a quick unmount if needed. Made in 2mm steel with 1.6mm visor. Steel thickness may vary due to the handcrafted methods used in its manufacture. The steel is untreated and may have rust. To protect the steel you may rub it with mineral or synthetic oil. Leather chin strap included.

Size M: 60-61 cm perimeter
Size L: 63-64 cm perimeter

All dimensions are approximate and may vary from piece to piece.

Between 1450 and 1500 no one went to war without wearing at least one form of head protection, usually barbute or sallet. There were many different designs depending on the origin of the item but some, as the one shown here, had simple but effective designs. 

Made of 1.6mm steel. Steel thickness may vary due to the handcrafted methods used in its manufacture. The steel is untreated and may have rust. To protect the steel you may rub it with mineral or synthetic oil. Leather chin strap included.

Size M: 60-61 cm perimeter
Size L: 63-64 cm perimeter

All dimensions are approximate and may vary from piece to piece.

The sallet was a war helmet that replaced the bascinet in Italy, western and northern Europe and Hungary during the mid-15th century. In Italy, France and England the armet helmet was also popular, but in Germany, the sallet became almost universal.

Made in steel of 1.6mm. Steel thickness may vary due to the handcrafted methods used in its manufacture. The steel is untreated and may have rust. To protect the steel you may rub it with mineral or synthetic oil. Leather chin strap included.

Size M: 60-61 cm perimeter
Size L: 63-64 cm perimeter

All dimensions are approximate and may vary from piece to piece.

Near to the end of 15th-century, sallets began a transformation into the shapes known as "transitional". This replica is based on a piece known as A72 from the Wallace Collection dated on 1520 and is attributed to have been manufactured in the north of Italy. It was likely used with a gorget without bevor and belonged to the collection of the Count of Nieuwerkerke, and acquired by Sir Richard Wallace in 1871. This style of sallet can be seen in the painting by Eugène Emmanuel Viollet-le-Duc in his piece “Castles and Warfare in the Middle Ages”.

Made of 2mm steel with a 1.6mm steel faceplate. Steel thickness may vary due to the handcrafted methods used in its manufacture. The steel is untreated and may have rust. To protect the steel you may rub it with a mineral or synthetic oil. Leather chin strap included.

Size M: 60-61 cm perimeter
Size L: 63-64 cm perimeter

All dimensions are approximate and may vary from piece to piece.

Made of 2.5mm, 12 gauge steel. Steel thickness may vary due to the handcrafted methods used in its manufacture. The steel is untreated and may have rust. To protect the steel you may rub it with mineral or synthetic oil. No returns will be accepted due to these issues.

Outer Circumference: 63~64 cm

This helmet doesn't have inner padding.

Leather chin strap included.

All dimensions are approximate and may vary from piece to piece.

Extracted directly from the engravings, we've interpreted and reproduced this beautiful cabasset. It is ideal for 17^th century re-enactment from the English Civil War era. In the engravings, pikemen can be seen wearing this protection combined with a breastplate (MH-A0798).They can also be seen on arquebus troops and are represented in the art of other places and on other troops. The cheek plates included were used to protect the neck and face of the wearer and became a common feature of the age.

This helmet is constructed from 16 gauge steel making it great for English Civil War era re-enactment. Leather chin strap included.

Inner Circumference
M: 57-59cm
L: 60-61cm

All dimensions are approximate and may vary from piece to piece.

Buy the Pikeman’s Cabasset Helmet with confidence from the UK’s leading Renaissance Helmet retailer.

Our English Civil War Cabasset/Morion is crafted from 14 gauge steel with a 16 gauge brim, making is great for re-enactment. It features an adjustable linen liner and adjustable leather chin strap.

Inner Circumference
M: 57-59cm
L: 60-61cm

All dimensions are approximate and may vary from piece to piece.

Buy the English Civil War Cabasset/Morion with confidence from the UK’s leading Renaissance Helmet retailer.

This helmet was made after the one kept on the Prague Castle who supposedly belonged to Saint Wenceslaus I, a Czech monarch from the early 10th century. This is one of the earliest conical helmets made in one piece that at the time where starting to substitute the comparatively weaker Spangenhelms. It has a beautiful riveted cross-shaped nasal.

Meanwhile its decoration is sometimes wrongly related to Odin it’s more probably that corresponds to a conventionalized Christian cross representation. Even though the nasal is richly decorated on the original, we offer a clean version for you to make your own customizations. This is the perfect protection from the wealthy warriors from the 10th c. onwards.

Our Saint Wenceslaus I Nasal Helmet is constructed from 14 gauge steel making it perfect from most re-enactment groups. It features an adjustable padded liner and buckled leather chin strap.

Inner Circumference
M: 57-59cm
L: 60-61cm

All dimensions are approximate and may vary from piece to piece.