Re-enactment

Swords like this Renaissance long sword are often called bastard or hand and a half swords. The term "bastard" indicates that this versatile sword can be used one handed or two handed.

The double-edged blade has three fullers. The two outer ones run the length of the ricasso only and the middle one extends over approx. one-third the length of the blade. The two side guard rings at the curved crossguard are an indication that this edged weapon was in use during the transition between the rapier and the classic sword. The grip is made of wood wrapped in leather and decorative wire for a sure grasp. Our Renaissance long sword includes a scabbard with an attractive mount and chape.

Total Length: 115.5cm
Blade Length: 96cm
Grip Length: 18cm
Weight: 1.44kg
Blade Thickness (base): 4.5mm
Blade Thickness (CoP): 4.1mm
Blade Width (base): 4.5cm
Blade Width (CoP): 3.3cm
Point of Balance (PoB): 11cm
Centre of Percussion (CoP): 30cm
Oakeshott type: XX
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

Brought back by popular demand, we are pleased to offer this Windlass Classic bastard sword. This massive broad sword could have easily been used at the Battle of Bosworth Field in 1485, cutting and slashing its way through the Tudor ranks. As large as this sword is, it is still amazingly light and well balanced.

The wide blade is forged of high carbon steel, while the pommel and cross guard have been antiqued with a darkened, aged finish. The large 7" handle is wrapped in soft black leather with a steel separator ring and can easily accommodate two hands. Made by Windlass Steelcrafts.

Total Length: 113cm
Blade Length: 88.5cm
Blade Width: 5.3cm
Blade Thickness: 0.5cm
Weight: 1640g
Grip Length: 16.5cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

Combining versatility with utility, the dexterity and lightness of the Agincourt betrays a dangerous fighting blade of respected martial utility. With a 1065 high carbon steel blued patina, it’s well protected from the frequent rust spots and stains that occur so often from everyday practice and exposure to the elements. The battle-hardened finish had an extra wide tang and is tempering to a low 50's RC. This pre-sharpened blade has gone through rigorous testing.

The hands-on nature of the manufacturing by master smiths makes this line unique. Includes a matching scabbard with belt stop, custom packaging and certificate of authenticity signed by each smith that touched your blade through every step of the forging process. One could easily envision English long-bowmen and knights alike wielding this blackened blade on the fields of the famous and disastrous battle honoured in the naming of this sword. 

Total Length: 99cm
Blade Length: 78cm
Blade Width: 2.5cm
Weight: 1134g
Point of Balance: 9cm Below Hilt
Blade: 1065 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

A beautifully proportioned weapon with dynamic handling qualities, it is a harmony of mass and dimension. With a long, semi-tapered diamond cross-section fitted to a round ergonomic pommel on a double-handed grip, this is a fine example of the perfection that was achieved in this popular design. Against any opposing arms or armour it was capable of quick deadly cuts as well as accurate and forceful thrusts. Aptly named for the bloody late 15th-century battle during the War of the Roses, the Bosworth is a fast and capable warsword adeptly able to execute the deadly “Mastercut” techniques so closely associated with double-handed blades of the period. With a slim handle that virtually begs to be gripped in the diverse and effective winding actions that this kind of sword ideally allowed, it features a surprisingly small heft for its size.

This ebony-toned “queen of weapons” is perfectly suited to foot-combat in war, judicial duel or knightly challenge. This is a substantial and graceful weapon that will leave the wielder every confidence it could readily defend life if called upon. Discover with it just why this form of longsword was respected for centuries and celebrated against whatever it encountered.

Total Length: 120cm
Blade Length: 92cm
Blade Width: 4cm
Weight: 1304g
Point of Balance: 10cm Below Hilt
Blade: 1065 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

If King Arthur actually existed many historians place him as a war leader seeking to halt the invasion of the Saxons after the fall of Rome. There are many indications that England did, after a time of much strife, have a brief period of peace and prosperity in what is now called the "Dark Ages".

This sword is of a type that was widely in use during this period and would be what a hard-fighting warrior would prefer. Nicely balanced, well-tempered high carbon steel blade offset with antiqued brass parts.

Total Length: 94.5cm
Blade Length: 79cm
Grip Length: 10cm
Weight: 1280g
Blade Thickness (base): 4.7mm
Blade Thickness (CoP): 4mm
Blade Width (base): 4.2cm
Blade Width (CoP): 3.9cm
Point of Balance (PoB): 13cm
Centre of Percussion (CoP): 22cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood

All measurements are approximate and will vary from piece to piece.

A transition from the Viking sword to the classic medieval sword, our medieval sword is probably Oakeshott type X. Swords like this one were very popular for centuries.

The double-edged, hardly tapered blade has a long, relatively wide fuller which makes it balance very well. The curved, flared crossguard provides lots of protection for your hand. Thanks to its leather covering, the grip is comfortable to grasp. The wheel pommel is riveted. Our classic medieval sword comes with a scabbard.

Total Length: 100cm
Blade Length: 83.5cm
Grip Length: 10cm
Weight: 1.42kg
Blade Thickness (base): 4.1mm
Blade Thickness (CoP): 3.6mm
Blade Width (base): 5.1cm
Blade Width (CoP): 3.8cm
Point of Balance (PoB): 15cm
Centre of Percussion (CoP): 20cm
Oakeshott type: X
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability. The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonymous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap.

The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.

Total Length: 101.5cm
Blade Length: 82.5cm
Blade Width: 6.5cm
Blade Thickness: 4.3mm
Point of Balance (PoB): 10cm
Weight: 1.6kg
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

This medieval Acre Crusader Broadsword from Windlass Steelcrafts Battlecry collection is a formidable weapon of proven worth. This classic knightly sword was an idea for sword and shield or sword and buckler combat whether on foot or horseback. The Acre crusader sword is a stout and fearsome blade that takes advantage of its heft, width, and centre and gravity to deliver deadly slashing cuts and hacking blows as well as thrusts.

With a wide cross-guard of over 8" it's no sword for the soft hearted or weak-spirited. Its practical cruciform hilt with single-hand grip and disc pommel was to be the functional model for countless other sword styles to follow.

Total Length: 100cm
Blade Length: 83cm
Blade Width: 5cm
Weight: 1530g
Grip Length: 16.5cm
Point of Balance: 15cm 
Blade: 1065 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

A weapon unequalled in elegance and grace: the classic French rapier. The slender, double-edged blade determines the character of this classic rapier, whose ricasso elegantly becomes narrower inside the basket. But the complex basket with its sweeping finger guard is not the only special feature this classic rapier has to offer: the grip is bordered by braided steel wire on both sides.

The grip itself is made of horn wrapped with golden wire for a stunning effect. When used with a French parrying dagger, this classic rapier forms part of a deadly set that was especially appreciated by duellists. Our classic French rapier comes with its own scabbard.

Total Length: 116cm
Blade Length: 99cm
Grip Length: 8cm
Weight: 1.14kg
Blade Thickness (base, outside basket): 4.7mm
Blade Thickness (CoP): 3.1mm
Blade Width (base, outside basket): 2cm
Blade Width (CoP): 1.4cm
Point of Balance (PoB): 6cm
Centre of Percussion (CoP): 20cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.