Re-enactment

A hand-carved solid hardwood eating spoon with curved handle and deep bowl, perfect for medieval feasts, reenactments, or rustic dining displays.

Length: 18cm
Material: Solid hardwood

All dimensions are approximate and may vary from piece to piece.

Swords like this Renaissance long sword are often called bastard or hand and a half swords. The term "bastard" indicates that this versatile sword can be used one handed or two handed.

The double-edged blade has three fullers. The two outer ones run the length of the ricasso only and the middle one extends over approx. one-third the length of the blade. The two side guard rings at the curved crossguard are an indication that this edged weapon was in use during the transition between the rapier and the classic sword. The grip is made of wood wrapped in leather and decorative wire for a sure grasp. Our Renaissance long sword includes a scabbard with an attractive mount and chape.

Total Length: 115.5cm
Blade Length: 96cm
Grip Length: 18cm
Weight: 1.44kg
Blade Thickness (base): 4.5mm
Blade Thickness (CoP): 4.1mm
Blade Width (base): 4.5cm
Blade Width (CoP): 3.3cm
Point of Balance (PoB): 11cm
Centre of Percussion (CoP): 30cm
Oakeshott type: XX
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

Our Temple Church sword is a replica of a sword found in the River Thames in London. The sword, forged in the period between 1300-1350, was discovered opposite Temple Church, the headquarters of the Knights Templar in England.

During the 14th century, the gardens of the Temple in London ran down to the river’s edge where this sword was discovered. The discovery location, coupled with the crosses in the pommel, suggests that it is a Templar knight’s sword thrown into the river when the Order of the Temple was dissolved by Edward II in 1314.

Total Length: 127.5cm
Blade Length: 100.5cm
Blade Width: 5cm
Blade Thickness: 0.4cm
Guard Width: 20cm
Point of Balance: 20cm
Weight: 1550g
Material: High Carbon Steel Blade, Leather Grip
Edge: Blunt - 1.5mm
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

These swords feature high carbon EN42J Spring Steel blades that have been forged and tempered to perform like their historical counterparts. They have a core hardness of 45HRC approx, with an edge hardness of 50HRC approx. The hilts feature authentically styled forged guards and pommels constructed from steel, and wooden grips that are masterfully wrapped in leather for an aesthetic yet comfortable finish.

They come complete with leather-wrapped wooden scabbard.

Total Length: 114cm
Blade Length: 91cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Guard Width: 19.5cm
Point of Balance: 20cm
Weight: 1220g
Material: High Carbon Steel Blade, Leather Grip
Edge: 2.5mm Blunt
Pommel: Peened
Scabbard: Wood, leather, steel

All dimensions are approximate and may vary from piece to piece.

This line of swords features high carbon EN42J Spring Steel blades that have been forged and tempered to perform like their historical counterparts. They have a core hardness of 45HRC approx. with an edge hardness of 50HRC approx.

The hilts feature authentically styled forged guards and pommels constructed from steel, and wooden grips that are masterfully wrapped in leather for an aesthetic yet comfortable finish. They come complete with leather wrapped wooden scabbards.

Total Length: 114cm
Blade Length: 90.5cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Guard Width: 22cm
Point of Balance: 16cm
Weight: 1300g
Material: High Carbon Steel Blade, Leather Grip
Edge: 2.5mm Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

Brought back by popular demand, we are pleased to offer this Windlass Classic bastard sword. This massive broad sword could have easily been used at the Battle of Bosworth Field in 1485, cutting and slashing its way through the Tudor ranks. As large as this sword is, it is still amazingly light and well balanced.

The wide blade is forged of high carbon steel, while the pommel and cross guard have been antiqued with a darkened, aged finish. The large 7" handle is wrapped in soft black leather with a steel separator ring and can easily accommodate two hands. Made by Windlass Steelcrafts.

Total Length: 113cm
Blade Length: 88.5cm
Blade Width: 5.3cm
Blade Thickness: 0.5cm
Weight: 1640g
Grip Length: 16.5cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

Combining versatility with utility, the dexterity and lightness of the Agincourt betrays a dangerous fighting blade of respected martial utility. With a 1065 high carbon steel blued patina, it’s well protected from the frequent rust spots and stains that occur so often from everyday practice and exposure to the elements. The battle-hardened finish had an extra wide tang and is tempering to a low 50's RC. This pre-sharpened blade has gone through rigorous testing.

The hands-on nature of the manufacturing by master smiths makes this line unique. Includes a matching scabbard with belt stop, custom packaging and certificate of authenticity signed by each smith that touched your blade through every step of the forging process. One could easily envision English long-bowmen and knights alike wielding this blackened blade on the fields of the famous and disastrous battle honoured in the naming of this sword. 

Total Length: 99cm
Blade Length: 78cm
Blade Width: 2.5cm
Weight: 1134g
Point of Balance: 9cm Below Hilt
Blade: 1065 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

A beautifully proportioned weapon with dynamic handling qualities, it is a harmony of mass and dimension. With a long, semi-tapered diamond cross-section fitted to a round ergonomic pommel on a double-handed grip, this is a fine example of the perfection that was achieved in this popular design. Against any opposing arms or armour it was capable of quick deadly cuts as well as accurate and forceful thrusts. Aptly named for the bloody late 15th-century battle during the War of the Roses, the Bosworth is a fast and capable warsword adeptly able to execute the deadly “Mastercut” techniques so closely associated with double-handed blades of the period. With a slim handle that virtually begs to be gripped in the diverse and effective winding actions that this kind of sword ideally allowed, it features a surprisingly small heft for its size.

This ebony-toned “queen of weapons” is perfectly suited to foot-combat in war, judicial duel or knightly challenge. This is a substantial and graceful weapon that will leave the wielder every confidence it could readily defend life if called upon. Discover with it just why this form of longsword was respected for centuries and celebrated against whatever it encountered.

Total Length: 120cm
Blade Length: 92cm
Blade Width: 4cm
Weight: 1304g
Point of Balance: 10cm Below Hilt
Blade: 1065 High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

Paul Chen swords are crafted in much the same way as swords were made centuries ago, except now the blades are forged from high-carbon spring steel. The blade finish is far from being polished again more closely replicating what the medieval swordsmith was able to achieve. Except as noted the grips are leather covered hardwood. Fittings are either steel or solid brass. These swords will appeal to the re-enactor who wants a sword with the same appearance as the originals.

This version of a 16th-century piece provides an economical and versatile cutting sword. Balance is excellent, providing a sword which lends itself to both single and two-handed use.

Total Length: 94.6cm
Blade Length: 69.3cm
Grip Length: 19cm
Weight: 1280g
Blade Thickness (base): 0.6cm
Blade Width (base): 4.5cm
Blade: 1566 High Carbon Steel 
Edge: Sharp
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.