Re-enactment

Swords like this Renaissance long sword are often called bastard or hand and a half swords. The term "bastard" indicates that this versatile sword can be used one handed or two handed.

The double-edged blade has three fullers. The two outer ones run the length of the ricasso only and the middle one extends over approx. one-third the length of the blade. The two side guard rings at the curved crossguard are an indication that this edged weapon was in use during the transition between the rapier and the classic sword. The grip is made of wood wrapped in leather and decorative wire for a sure grasp. Our Renaissance long sword includes a scabbard with an attractive mount and chape.

Total Length: 115.5cm
Blade Length: 96cm
Grip Length: 18cm
Weight: 1.44kg
Blade Thickness (base): 4.5mm
Blade Thickness (CoP): 4.1mm
Blade Width (base): 4.5cm
Blade Width (CoP): 3.3cm
Point of Balance (PoB): 11cm
Centre of Percussion (CoP): 30cm
Oakeshott type: XX
Blade: High Carbon Steel
Edge: Blunt
Pommel: Threaded
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

Our Temple Church sword is a replica of a sword found in the River Thames in London. The sword, forged in the period between 1300-1350, was discovered opposite Temple Church, the headquarters of the Knights Templar in England.

During the 14th century, the gardens of the Temple in London ran down to the river’s edge where this sword was discovered. The discovery location, coupled with the crosses in the pommel, suggests that it is a Templar knight’s sword thrown into the river when the Order of the Temple was dissolved by Edward II in 1314.

Total Length: 127.5cm
Blade Length: 100.5cm
Blade Width: 5cm
Blade Thickness: 0.4cm
Guard Width: 20cm
Point of Balance: 20cm
Weight: 1550g
Material: High Carbon Steel Blade, Leather Grip
Edge: Blunt - 1.5mm
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

These swords feature high carbon EN42J Spring Steel blades that have been forged and tempered to perform like their historical counterparts. They have a core hardness of 45HRC approx, with an edge hardness of 50HRC approx. The hilts feature authentically styled forged guards and pommels constructed from steel, and wooden grips that are masterfully wrapped in leather cord for an aesthetic yet comfortable finish.

They come complete with leather-wrapped wooden scabbard.

Total Length: 114cm
Blade Length: 91cm
Blade Width: 5cm
Blade Thickness: 0.5cm
Guard Width: 19.5cm
Point of Balance: 20cm
Weight: 1220g
Material: High Carbon Steel Blade, Leather Grip
Edge: 2.5mm Blunt
Pommel: Peened
Scabbard: Wood, leather, steel

All dimensions are approximate and may vary from piece to piece.

Brought back by popular demand, we are pleased to offer this Windlass Classic bastard sword. This massive broad sword could have easily been used at the Battle of Bosworth Field in 1485, cutting and slashing its way through the Tudor ranks. As large as this sword is, it is still amazingly light and well balanced.

The wide blade is forged of high carbon steel, while the pommel and cross guard have been antiqued with a darkened, aged finish. The large 7" handle is wrapped in soft black leather with a steel separator ring and can easily accommodate two hands. Made by Windlass Steelcrafts.

Total Length: 113cm
Blade Length: 88.5cm
Blade Width: 5.3cm
Blade Thickness: 0.5cm
Weight: 1640g
Grip Length: 16.5cm
Blade: 1065 High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Wood, Leather & Steel

All dimensions are approximate and may vary from piece to piece.

If King Arthur actually existed many historians place him as a war leader seeking to halt the invasion of the Saxons after the fall of Rome. There are many indications that England did, after a time of much strife, have a brief period of peace and prosperity in what is now called the "Dark Ages".

This sword is of a type that was widely in use during this period and would be what a hard-fighting warrior would prefer. Nicely balanced, well-tempered high carbon steel blade offset with antiqued brass parts.

Total Length: 94.5cm
Blade Length: 79cm
Grip Length: 10cm
Weight: 1280g
Blade Thickness (base): 4.7mm
Blade Thickness (CoP): 4mm
Blade Width (base): 4.2cm
Blade Width (CoP): 3.9cm
Point of Balance (PoB): 13cm
Centre of Percussion (CoP): 22cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood

All measurements are approximate and will vary from piece to piece.

A transition from the Viking sword to the classic medieval sword, our medieval sword is probably Oakeshott type X. Swords like this one were very popular for centuries.

The double-edged, hardly tapered blade has a long, relatively wide fuller which makes it balance very well. The curved, flared crossguard provides lots of protection for your hand. Thanks to its leather covering, the grip is comfortable to grasp. The wheel pommel is riveted. Our classic medieval sword comes with a scabbard.

Total Length: 100cm
Blade Length: 83.5cm
Grip Length: 10cm
Weight: 1.42kg
Blade Thickness (base): 4.1mm
Blade Thickness (CoP): 3.6mm
Blade Width (base): 5.1cm
Blade Width (CoP): 3.8cm
Point of Balance (PoB): 15cm
Centre of Percussion (CoP): 20cm
Oakeshott type: X
Blade: High Carbon Steel
Edge: Sharp
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

The best metalsmiths from Windlass Steelcrafts have spent hours on each blade, hand forging the high carbon steel for optimal balance, quickness and durability. The pommel features a highly detailed Templar coin on each side with Latin inscription and the symbols that have grown synonymous with the Templar Order, while the grip is hand-wrapped with a rich genuine red leather with a wire over-wrap.

The sword includes a custom, matching wooden scabbard covered in top grain, heavy-duty leather and a period belt with solid metal fittings.

Total Length: 101.5cm
Blade Length: 82.5cm
Blade Width: 6.5cm
Blade Thickness: 4.3mm
Point of Balance (PoB): 10cm
Weight: 1.6kg
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.

Our original Robin Hood sword is the licensed replica from "Robin Hood," the Universal Pictures movie directed by Ridley Scott. Made of hand forged carbon steel, this licensed Robin Hood sword is just like the sword in the movie – down to the smallest detail.

The unusual hilt is a very special eye-catcher. The hardwood grip is set with decorative turquoise cabochons and the steel has been treated to look old. The inscription made famous in the movie is engraved on the steel surfaces at the sides: "Rise and rise again" or "Until lambs become lions." The octagonal pommel is riveted and decorated with the cross pattée favoured by crusaders. Our original Robin Hood sword includes a decorative shield with the Loxley family coat of arms that you can hang on the wall and use to display the sword.

Total Length: 101.5cm
Blade Length: 84cm
Grip Length: 11.5cm
Weight: 1.45kg
Blade Thickness (base): 4.0mm
Blade Thickness (CoP): 4.6mm
Blade Width (base): 5.1cm
Blade Width (CoP): 3.6cm
Point of Balance (PoB): 13cm
Centre of Percussion (CoP): 21cm
Oakeshott type: XI
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: None

All dimensions are approximate and may vary from piece to piece.

Our Munich Town Watch Rapier has a relatively wide blade, which makes it ideal for both functions. It is a replica of a rapier type found in many museums today: in the Munich Armory, the Bavarian Army Museum in Ingolstadt, Germany or catalogue number A612 in the Wallace Collection, for example.

Made around 1600, this rapier has a strong, tapering blade hand forged from carbon steel with a narrow ricasso inside the finger ring. Its elegant complex basket has side guard rings and a knuckle bow. The hardwood grip is elaborately wrapped with iron wire with braided wire at the ends. A riveted pommel shaped like a flattened ball completes the hilt.

This Munich Town Watch Rapier includes a black leather scabbard with a mount and chape.

Total Length: 100.5cm
Blade Length: 83.5cm
Grip Length: 8.5cm
Weight: 1.56kg
Blade Thickness (base): 3.7mm
Blade Thickness (CoP): 3.7mm
Blade Width (base): 4.2cm
Blade Width (CoP): 2.7cm
Point of Balance (PoB): 6cm
Centre of Percussion (CoP): 31.5cm
Blade: High Carbon Steel
Edge: Blunt
Pommel: Peened
Scabbard: Leather, Wood, Steel

All dimensions are approximate and may vary from piece to piece.